Login or Register to Ask a Question and Join Our Community


Solaris

Configure ce0 as ce4000 in Solaris 9 ?

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Configure ce0 as ce4000 in Solaris 9 ?
# 1  
Old 03-05-2013
Configure ce0 as ce4000 in Solaris 9 ?
can we configure the ce0 and ce1 interface as ce4000 and ce5000 in solaris 9

I have a server configured similar way.. I need to setup another two server in such configuration find the sample output from working server.

Please help

Code:
root@judi:[15:26:19]:/dev# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
ce4000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
        inet 172.20.49.144 netmask ffffff80 broadcast 172.20.49.255
        ether 0:3:ba:7a:e2:d0
ce5000: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3
        inet 172.20.37.67 netmask ffffff00 broadcast 172.20.37.255
        ether 0:3:ba:7a:e2:d0
root@judi:[15:26:21]:/dev# grep -i net /etc/path_to_inst
"/pci@1f,0/network@a" 0 "ce"
"/pci@1f,0/network@b" 1 "ce"
root@judi:[15:26:43]:/dev# uname -a
SunOS judi 5.9 Generic_118558-02 sun4u sparc SUNW,Serverblade1
root@judi:[15:26:47]:/dev#

Last edited by DukeNuke2; 03-05-2013 at 03:04 PM..
# 2  
Old 03-05-2013
I think that is is a Vlan configuration over the normal ce interfaces,

please check

http://docs.oracle.com/cd/E19253-01/...eij/index.html

troy's unix space: VLAN Tagged Interfaces (Solaris)
# 3  
Old 03-11-2013
Thanks for your reply, I tried plumb the interface as ce4000 and ce5000, also configured the IP's as of ce0and ce1, then unconfigured the ce0 and ce1.. how ever after doing this it stops communicating outside network.. even not reachable for gateway..
Now I reverted back to ce0 and ce1 with same ip configuration and it working fine..

any thoughts .. Smilie
# 4  
Old 03-11-2013
VLAN tagged interfaces cannot communicate but with other interfaces configured in the same VLAN and this is by design.

You need to have at least your switch properly configured for this to work.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Configure mailx in Solaris 10

Hello, We are using exchange server in our environment. I need to configure mailx to send email from Solaris box to one mail I'd which is on exchange server. I know ip of exchange server.. Let me know where should I configure that ip to do the needful? (2 Replies)
Discussion started by: sureshsun
2 Replies

2. UNIX for Dummies Questions & Answers

Solaris Logic to transmit traffic to physical interfaces ( eg ce0 and ce1)

Just wanted to understand what is the logic being used by Solaris(kernel) to transmit data/traffic on physical interfaces. I have seen most of the time traffic is being sent to interface ce0 and sometime to ce1. I have removed ip address from below command for some reason. netstat -rn ... (3 Replies)
Discussion started by: nadeemahmed
3 Replies

3. UNIX for Advanced & Expert Users

Configure a domain in Solaris.

People i have 2 solaris 10 A webserver and a mailserver. What i need to do is to send a mail inside de webserver to the domain company In the webserver When i use mailx -v -s Prueba me@gmail.com This is ok and the mail is send. But when i try to send a mail to someone inside de company ... (4 Replies)
Discussion started by: enkei17
4 Replies

4. Solaris

Help to configure sendmail on Solaris 10

Hello, I need help to configure sendmail on Solaris 10. I have to configure sendmail to send mail on the Internet, now works only for sending mail for local users. I'm studying several tutorials ... When I try to send a mail to an external address (eg aaaa@gmail.com) the mail is placed... (3 Replies)
Discussion started by: arfry
3 Replies

5. Solaris

how to configure IPMP in solaris 9

Hi friends , can anyone provide me the complete steps to configure IPMP in solaris 9 or 10 provided i have two NIC card ? regards jagan (4 Replies)
Discussion started by: jaganblore
4 Replies

6. Solaris

Increasing link speed on ce0.

Hi, Does anyone know how to increase the link speed on a ce interface? Currently mine is running at 100. I need to increase this to 1000. # kstat -p ce:0::link* ce:0:ce0:link_T4 0 ce:0:ce0:link_asmpause 0 ce:0:ce0:link_duplex 2 ce:0:ce0:link_pause 0... (4 Replies)
Discussion started by: sparcman
4 Replies

7. Solaris

how to configure network in solaris 10?

Hi..i have installed solaris 10 on vmware. I m not able connect to internet. pls help in detail. how to solve the problem. During the installation i have put no DHCP. cofigured manually ( Ip 192.168.1.9) default gateway 192.168.1.1 . (3 Replies)
Discussion started by: johnavery
3 Replies

8. Cybersecurity

How to configure sendmail in solaris 10

how to configure sendmail in solaris 10 ???? Anyone knows, pls share the documents. (1 Reply)
Discussion started by: vishwanathhcl
1 Replies

9. Solaris

ce0 and ce1 have the same mac address

i have ce0 and ce1 online, on 2 different networks. im getting a message that says one nic is trying to assume the others IP or something to thta effect. I do ifconfig -a and i see they have the same mac. How do i deal with this? Solaris 9 i beleive 04/04 Thanks, Brian (2 Replies)
Discussion started by: BG_JrAdmin
2 Replies

10. IP Networking

configure TCP/IP for solaris 8

Hello, I have 4 unix (Solaris 8) stations need to setup on network. what is a easy way and quick to setup TCP/IP so I can bring it online?. Please advise! (3 Replies)
Discussion started by: phapvn
3 Replies
Login or Register to Ask a Question