Zone network issue

10 More Discussions You Might Find Interesting

1. Solaris

Solaris 11 zone has no external network access (except to Global Zone)

Hi, hoping someone can help, its been a while since I used Solaris. After creating a NGZ (non global zone), the NGZ can access the GZ (Global Zone) and the GZ can access the NGZ (using ssh, zlogin) However, the NGZ cannot access any other netwqork devices, it can't even see the default router ...

2. Solaris

Configure Solaris zone on new network

Hi, I have a Solaris 10 zone which I need to configure on a new network. I have configured the new IP on the zone itself and I can ping the interface from a node on the same network, but not from another network. Basically I need to know how to route the traffic from the zone to it's...

3. Solaris

Solaris non-global zone network vlan

Have 2 nics on physical system net0 phys 1500 up -- net1 phys 1500 up -- 1. I want to create a link aggregation with LACP enabled with above 2 nics 2. Create port-group(Like we create on ESXi) with VLAN-ID 2141 3. And assign this...

4. Solaris

Unable to get Solaris 11 Zone onto the network

Hello, I followed these instructions to create a Solaris 11 zone: http://www.oracle.com/technetwork/articles/servers-storage-admin/o11-092-s11-zones-intro-524494.html And I am unable to ping anything from the Local Zone except for the IP address of the global zone. My global zone has an IP...

5. Solaris

Branded Solaris 10 zone no network

I am trying to create a branded 10 zone on a Solaris 11.1 control domain. I am using a flar image (cpio) from an existing LDOM. Here are the steps taken after flarcreate. #zonecfg -z <device> >create -b >set brand=solaris10 >set zonepath=/zonez/<device> >set ip-type=exclusive >add net...

6. Solaris

Network Config on Zone in a Guest LDOM

Solaris for Sparc 11.1 with the latest patches. Created a Guest LDOM with two vnet's net0 and net1, installed a guest whole root, ip exclusive zone that I want to be able to utilize DHCP. I have been able to create the zone but unable to get it to boot because I am unable to assign an anet to it....

7. Solaris

Zone failes to boot due to mount issue, dir exists in zone.

I have two physical servers, with zones that mount local storage. We were using "raw device" in the zonecfg to point to a metadevice on the global zone (it was not mounted in the global zone at any point). It failed to mount on every boot because the directory existed in the zone. I...

8. IP Networking

Network mapper based on zone files ?

Good morning, Say I have a zone file like this: ns.chicago.company.com. 86400 IN A 212.168.12.15 ns.casper.company.com. 86400 IN A 212.168.14.15 company.com. 86400 IN NS ns.aux.company.com. ns.aux.company.com. 86400 IN ...

9. Solaris

How to assign a dedicated network interface to a non-global zone?

We got a network card(e1000g0) with 1gb of speed and working with global zone. We got a new network interface card, we have to place that in slot and we have to use that card as dedicated network interface to the non-global zone(hyd_app) in V890. As i never done this before, please explain me...

10. Solaris

Solaris 10 network configuration problem with zone

I am seeking help from the gurus in this forum and hope that I can find answers soon. Anyone who provide the answers will be greatly appreciated. I have a sparc box with Solaris 10 on it. We install Solaris with zone structure. One global zone and two other zone. I installed Oracle DB on global...

LEARN ABOUT OPENSOLARIS

zcons

zcons(7D)							      Devices								 zcons(7D)

NAME

       zcons - Zone console device driver

DESCRIPTION

       The  zcons character driver exports the console for system zones. The driver is comprised of two "sides:" a master side with which applica-
       tions in the global zone communicate, and a slave side, which receives I/O from the master side. The slave side is available in the  global
       zones.

       Applications must not depend on the location of /dev or /devices entries exported by zcons. Inside a zone, the zcons slave  side is fronted
       by /dev/console and other console-related  symbolic links, which are used by applications that expect to write to the system console.

       The zcons driver is Sun Private, and may change in future releases.

FILES

       /dev/zcons/<zonename>/masterconsole

	   Global zone master side console for zone <zonename>.

       /dev/zcons/<zonename>/slaveconsole

	   Global zone slave side console for zone <zonename>.

       /dev/zconsole

	   Non-global zone console (slave side).

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+
       | Interface Stability	     |Sun Private		   |
       +-----------------------------+-----------------------------+

SEE ALSO

       zoneadm(1M), zonecfg(1M), attributes(5), zones(5)

SunOS 5.11							    24 Aug 2003 							 zcons(7D)

Solaris