Login or Register to Ask a Question and Join Our Community


Solaris

Controller Issue on X4600 after reboot

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Controller Issue on X4600 after reboot
# 1  
Old 07-13-2010
Controller Issue on X4600 after reboot
One of my X4600 server had a power loss and rebooted and now its giving me a strange problem servers internal disk controller naming has changed by itself ... the after failsafe boot md.conf file shows following c3txdx but shows internal disk at c4txdx ... what could be the reason for this and how can i bring up the server.

Code:
# echo | format
Searching for disks...done


AVAILABLE DISK SELECTIONS:
       0. c0t6006016061201F000E35A1519659DD11d0 <DEFAULT cyl 13052 alt 2 hd 255 sec 63>
          /scsi_vhci/disk@g6006016061201f000e35a1519659dd11
       1. c0t6006016061201F001D1F0F5512FCDC11d0 <DEFAULT cyl 58152 alt 2 hd 255 sec 63>
          /scsi_vhci/disk@g6006016061201f001d1f0f5512fcdc11
       2. c4t0d0 <DEFAULT cyl 17818 alt 2 hd 255 sec 63>
          /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@0,0
       3. c4t1d0 <DEFAULT cyl 17818 alt 2 hd 255 sec 63>
          /pci@0,0/pci1022,7458@11/pci1000,3060@4/sd@1,0


Code:
# more md.cf
# metadevice configuration file
# do not hand edit
d2 -m d12 d22 1
d12 1 1 c3t0d0s3
d22 1 1 c3t1d0s3
d3 -m d13 1
d13 1 1 c3t0d0s4
d1 -m d11 1
d11 1 1 c3t0d0s1
d0 -m d10 1
d10 1 1 c3t0d0s0
d23 1 1 c3t1d0s4
d21 1 1 c3t1d0s1
d20 1 1 c3t1d0s0

# 2  
Old 07-13-2010
look for files called "path_to_inst" in /etc.
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Linux

Issue in Bonding during Reboot(Linux)

Respected Members, We encountered an issue during node reboot when eth1 and eth5 of bond1 were behaving unusual(both eth1 and eth5 were in unknown states and ifdown and ifup were used to rectify). Please find the messages and configuration files as below and please let me know for any other... (0 Replies)
Discussion started by: Mudit Bansal
0 Replies

2. IP Networking

Node switched itself from static to DHCP on reboot issue

I'm trying to figure out what circumstances would cause an Open Solaris 11.2 host to switch itself from a static to a DHCP ip address upon reboot. This has only happened once but is a cause for some concern as this machine will be part of a web server pool. Nothing has changed on the LAN that... (2 Replies)
Discussion started by: SmokeyJoe
2 Replies

3. Hardware

Sun X4600 M2 enable Hyperthreading

Booting and checking BIOS there is no option to enable-disable hyperthreading. I have 8 Dual-Core AMD Opteron(tm) Processor 8220 and I see 16 cores. Enable hyperthreading I should have 32 cores. I have red hat 5.4 installed. Anyone know how can enable hypethreading ? I have last BIOS/Firmware... (2 Replies)
Discussion started by: laxtnog
2 Replies

4. Shell Programming and Scripting

Reboot script issue

Hi guys I am troubleshooting a script that informs me when a system has rebooted. The script is placed in /etc/rc3.d folder under root. The script is as follows: . /opt/scripts/function.sh PATH=/usr/bin EMAIL_ADD=<email address> ... (2 Replies)
Discussion started by: Junaid Subhani
2 Replies

5. Solaris

vnc issue after reboot

Hi , Everytime after reboot when user tries to start vnc below error is thrown $ vncserver :5 Couldn't start Xvnc; trying default font path. Please set correct fontPath in the vncserver script. Couldn't start Xvnc process. _XSERVTransSocketCreateListener: failed to bind listener... (7 Replies)
Discussion started by: chidori
7 Replies

6. AIX

Internal PCI X RAID Controller issue ?

Hello folks, Could someone tell me why I unable to create pdisks for a RAID Array # lscfg | grep scsi + sisscsia0 U787A.001.DPM0707-P1 PCI-X Dual Channel Ultra320 SCSI Adapter + scsi0 U787A.001.DPM0707-P1-T10 PCI-X Dual Channel Ultra320 SCSI Adapter... (12 Replies)
Discussion started by: filosophizer
12 Replies

7. Solaris

x4600 iLOM issue

I need to configure the iLOM for x4600 server. before I can set the IP details and commit, I need to set network state should be enabled. However my firmware is already the latest and I need not upgrade. I am not able to set the /SP/network state to enable. pls assist. i BELIEVE the bug was fixed... (5 Replies)
Discussion started by: incredible
5 Replies

8. SCO

SCO Reboot Issue

Hi, We are using SCO UNIX 7.1.3 and the server recently started rebooting by itself. Do anyone know how can i create a dump or crash dump while the server rebooots? Your quick help on this is really appreciated. Regards, Ravikumar R (1 Reply)
Discussion started by: rrb2009
1 Replies

9. HP-UX

Issue in reboot

Hi, Whenever I reboot this server remotely by using the command 'shutdown -r now' or 'reboot'. The server does not return to normal multi-user mode. It boots in single user mode. To bring back the server, someone is required to connect via console and fire 'init 3'. Please suggest on what... (1 Reply)
Discussion started by: mystition
1 Replies

10. Solaris

console for x4600

Hi, I ;ve a SUN x4600 running solaris 10. I want to connect to the system remotely form console like we can connect to sparc sc or alom .. (9 Replies)
Discussion started by: fugitive
9 Replies
Login or Register to Ask a Question