Solaris

# interface bge1
name="bge" parent="/pci@0,600000/pci@0/pci@1/pci@0" unit-address="4,1" \
adv_autoneg_cap=0 adv_1000fdx_cap=1 adv_1000hdx_cap=0 \
adv_100fdx_cap=0 adv_100hdx_cap=0 adv_100T4_cap=0 adv_10fdx_cap=0 \
adv_10hdx_cap=0;

# svcadm restart network/physical

# init 6

bge0            link: up        speed: 1000  Mbps       duplex: full
bge1            link: down      speed: 0     Mbps       duplex: unknown
bge2            link: up        speed: 1000  Mbps       duplex: full
bge3            link: unknown   speed: 0     Mbps       duplex: unknown
nxge0           link: up        speed: 1000  Mbps       duplex: full
nxge1           link: up        speed: 100   Mbps       duplex: full
nxge2           link: up        speed: 1000  Mbps       duplex: full
nxge3           link: unknown   speed: 1000  Mbps       duplex: full

#########################################################################
#
# The property below represents the list of subsystem vendor/device pairs
# with which driver operation is supported.  This list will be updated and
# extended as new subsystems are validated ...
#
bge-known-subsystems    = 0x108e1647,
                          0x108e1648,
                          0x108e16a7,
                          0x108e16a8,
                          0x17c20010,
                          0x17341013,
                          0x101402a6,
                          0x10f12885,
                          0x17c20020,
                          0x10b71006,
                          0x10280109,
                          0x1028865d,
                          0x0e11005a,
                          0x103c12bc;
#########################################################################
bge-rx-rings            = 1;
bge-tx-rings            = 1;
# interface bge1
name="bge" parent="/pci@0,600000/pci@0/pci@1/pci@0" unit-address="4,1" \
adv_autoneg_cap=0 adv_1000fdx_cap=1 adv_1000hdx_cap=0 \
adv_100fdx_cap=0 adv_100hdx_cap=0 adv_100T4_cap=0 adv_10fdx_cap=0 \
adv_10hdx_cap=0;