|
|
Mmap with fork : Resource unavaialable temporarily
|
|
rmalloc(9F) Kernel Functions for Drivers rmalloc(9F) NAME
rmalloc - allocate space from a resource map SYNOPSIS
#include <sys/map.h> #include <sys/ddi.h> unsigned long rmalloc(struct map *mp, size_t size); INTERFACE LEVEL
Architecture independent level 1 (DDI/DKI). PARAMETERS
mp Resource map from where the resource is drawn. size Number of units of the resource. DESCRIPTION
The rmalloc() function is used by a driver to allocate space from a previously defined and initialized resource map. The map itself is allocated by calling the function rmallocmap(9F). rmalloc() is one of five functions used for resource map management. The other functions include: rmalloc_wait(9F) Allocate space from a resource map, wait if necessary. rmfree(9F) Return previously allocated space to a map. rmallocmap(9F) Allocate a resource map and initialize it. rmfreemap(9F) Deallocate a resource map. The rmalloc() function allocates space from a resource map in terms of arbitrary units. The system maintains the resource map by size and index, computed in units appropriate for the resource. For example, units may be byte addresses, pages of memory, or blocks. The normal return value is an unsigned long set to the value of the index where sufficient free space in the resource was found. RETURN VALUES
Under normal conditions, rmalloc() returns the base index of the allocated space. Otherwise, rmalloc() returns a 0 if all resource map entries are already allocated. CONTEXT
The rmalloc() function can be called from user, interrupt, or kernel context. EXAMPLES
Example 1 Illustrating the principles of map management The following example is a simple memory map, but it illustrates the principles of map management. A driver allocates and initializes the map by calling both the rmallocmap(9F) and rmfree(9F) functions. rmallocmap(9F) is called to establish the number of slots or entries in the map, and rmfree(9F) to initialize the resource area the map is to manage. The following example is a fragment from a hypothetical start routine and illustrates the following procedures: o Panics the system if the required amount of memory can not be allocated (lines 11-15). o Uses rmallocmap(9F) to configure the total number of entries in the map, and rmfree(9F) to initialize the total resource area. 1 #define XX_MAPSIZE 12 2 #define XX_BUFSIZE 2560 3 static struct map *xx_mp; /* Private buffer space map */ ... 4 xxstart() 5 /* 6 * Allocate private buffer. If insufficient memory, 7 * display message and halt system. 8 */ 9 { 10 register caddr_t bp; ... 11 if ((bp = kmem_alloc(XX_BUFSIZE, KM_NOSLEEP) == 0) { 12 13 cmn_err(CE_PANIC, "xxstart: kmem_alloc failed before %d buffer" 14 "allocation", XX_BUFSIZE); 15 } 16 17 /* 18 * Initialize the resource map with number 19 * of slots in map. 20 */ 21 xx_mp = rmallocmap(XX_MAPSIZE); 22 24 /* 25 * Initialize space management map with total 26 * buffer area it is to manage. 27 */ 28 rmfree(xx_mp, XX_BUFSIZE, bp); ... Example 2 Allocating buffers The rmalloc() function is then used by the driver's read or write routine to allocate buffers for specific data transfers. The uiomove(9F) function is used to move the data between user space and local driver memory. The device then moves data between itself and local driver memory through DMA. The next example illustrates the following procedures: o The size of the I/O request is calculated and stored in the size variable (line 10). o Buffers are allocated through the rmalloc() function using the size value (line 15). If the allocation fails the system will panic. o The uiomove(9F) function is used to move data to the allocated buffer (line 23). o If the address passed to uiomove(9F) is invalid, rmfree(9F) is called to release the previously allocated buffer, and an EFAULT error is returned. 1 #define XX_BUFSIZE 2560 2 #define XX_MAXSIZE (XX_BUFSIZE / 4) 3 4 static struct map *xx_mp; /* Private buffer space map */ ... 5 xxread(dev_t dev, uio_t *uiop, cred_t *credp) 6 { 7 8 register caddr_t addr; 9 register int size; 10 size = min(COUNT, XX_MAXSIZE); /* Break large I/O */ 11 /* request into small ones */ 12 /* 13 * Get buffer. 14 */ 15 if ((addr = (caddr_t)rmalloc(xx_mp, size)) == 0) 16 cmn_err(CE_PANIC, "read: rmalloc failed allocation of size %d", 17 size); 18 19 /* 20 * Move data to buffer. If invalid address is found, 21 * return buffer to map and return error code. 22 */ 23 if (uiomove(addr, size, UIO_READ, uiop) == -1) { 24 rmfree(xx_mp, size, addr); 25 return(EFAULT); 26 } 27 } SEE ALSO
kmem_alloc(9F), rmalloc_wait(9F), rmallocmap(9F), rmfree(9F), rmfreemap(9F), uiomove(9F) Writing Device Drivers SunOS 5.11 16 Jan 2006 rmalloc(9F)
