Unable to connect to Internet


 
Thread Tools Search this Thread
Operating Systems Solaris Unable to connect to Internet
# 1  
Old 06-23-2009
Unable to connect to Internet

Hi friends
recently i have installed SXDE 1/08 into my machine,and i installed wifi driver also
its working fine,Recently i was unable to connect to Internet,I have not changed any configurations and any installations,thing is that i got my iwk0 interface is UP and IP address also and i can able to ping my gateway and other machines in the same network btw No proxy server but my institute have firewall
but why it is behaving like this...any help
Code:
#ifconfig iwk0
iwk0: flags=201004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4,CoS> mtu 1500 index 2
	inet 192.168.11.14 netmask ffffff00 broadcast 192.168.11.255

# cat /etc/hosts
127.0.0.1 loghost solaris

#svcs physical
disabled       14:24:57 svc:/network/physical:default
online         14:24:58 svc:/network/physical:nwam

bash-3.2$ cat /etc/resolv.conf
nameserver 192.168.1.234
nameserver 202.88.238.3
nameserver 202.88.238.5
bash-3.2$ nslookup www.google.com
server:      192.168.1.234
address:     192.168.1.234#53

Non-authoritative answer:
www.google.com canonical name = www.l.google.com.
Name: www.l.google.com
address: 209.85.153.104


Last edited by srinivas2828; 06-23-2009 at 09:30 AM.. Reason: forgot to add text
# 2  
Old 06-23-2009
It looks like the first DNS server is part of the corporate network and could even be on the same subnet if the netmask has been set too tight.

Does running a:
Code:
# netstat -rn

report the expected default router?

Can traceroute and/or ping reach Google
# 3  
Old 06-25-2009
Unable to connect to Internet

well..Thanks Tony
I am not good at Netwotking
here is the output of netstar -rn and traceroute
Code:
bash-3.2$ netstat -rn

Routing Table: IPv4
  Destination           Gateway           Flags  Ref     Use     Interface 
-------------------- -------------------- ----- ----- ---------- --------- 
default              192.168.11.1         UG        1          0 iwk0      
192.168.11.0         192.168.11.14        U         1          1 iwk0      
127.0.0.1            127.0.0.1            UH        2          7 lo0       

Routing Table: IPv6
  Destination/Mask            Gateway                   Flags Ref   Use    If   
--------------------------- --------------------------- ----- --- ------- ----- 
::1                         ::1                         UH      1      21 lo0
bash-3.2$ traceroute www.google.com
traceroute:Unknown host www.google.com

# 4  
Old 06-25-2009
If nslookup resolves www.google.com but not traceroute, you might have a hosts entry missing the dns service in the /etc/nsswitch.conf file.
# 5  
Old 06-25-2009
Unable to connect to Internet

thanks for your replies..I re-installed sxde 1/08 into my machine..its working fine now
# 6  
Old 06-25-2009
Quite overkill and quite an old release too.

I would suggest you to install a recent Solaris Express or OpenSolaris release instead.
# 7  
Old 06-26-2009
Unable to connect to Internet

thanks for your suggestions,I have used opensolaris .But I want to Try solaris express developers editions also..Now everything working fine without any problems
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Linux

Unable to connect guest VM to internet (QEMU via both 'User-mode networking' and 'TUN/TAP')

Hello, I installed FreeBSD 10.3 on AQEMU. I can't connect to internet in none of the modes of "Default, User-Mode Networking" and "TUN/TAP Networking". I am able to ping my host in the TAP networking mode (192.168.1.33 which is my IP addr in guest), but getting 'no route to host' for any... (1 Reply)
Discussion started by: temp-usr
1 Replies

2. Red Hat

Unable to connect to internet

Hello, I just installed CentOS 7 (Server with GUI) and guess what I could install Virtual Box Guest additions without installing any extra package/software which is great news ! Now bad news or not so great news. My Host OS is Windows 10, Virtual Box is the virtualization software. CentOS7-1... (0 Replies)
Discussion started by: bluemind2005
0 Replies

3. IP Networking

Unable to connect to internet on slackware 14.1 (hathway connection)

Hi, I have a wired internet connection of hathway provider. I would like to use the connection on my desktop as well as my laptop. My desktop pc has windows 7 and yesterday I installed slackware 14.1 (full installation) on my lenovo 3000 n100 laptop. Previously I had slacko puppy 5.7... (7 Replies)
Discussion started by: pinakbheed
7 Replies

4. Virtualization and Cloud Computing

unable to connect internet on virtual machine

I have installed Oracle VM virtual box on Windows 7 and using LINUX (backtrack 5) as my virtual OS. The problem is i'm unable to connect to internet from my virtual OS. i'm using USB dongle (mobile broad band) to connect to internet from my host OS windows 7. I tried setting NAT in VM settings... (0 Replies)
Discussion started by: Arun_Linux
0 Replies

5. Solaris

Can't connect to Internet

Dear freinds... I downloaded solaris for x86 and was able to configure the lan correctly.. I can ping and share with other destops through lan... but still I can't connect to internet ? can you please help.. I put my default gateway which is 192.168.1.1 to /etc/defaultrouter but with no use..... (13 Replies)
Discussion started by: yahyaaa
13 Replies

6. UNIX for Advanced & Expert Users

Unable to connect to INTERNET using BSNL Broad band connection on Solaris-x86

Hi, Iam using BSNL broad band connection and i have installed two OS Xp & Sun solaris -x86 on my machine.Iam able to use INTERNET on windows Xp but not able to do it on solaris x86. I have tried using DHCP concept as well as sys-unconfig command in solaris but no results. When i use... (5 Replies)
Discussion started by: jayaprakash
5 Replies

7. Linux

how to connect internet????

HI, Am using GPRS ( MOB # 3230 ) internet connection in windows Hw to use internet r connect in linux.. ( Red Hat Linux Ver.10 ) Please help me.. Thanks in adv.. (1 Reply)
Discussion started by: bharath raja
1 Replies

8. Solaris

How to connect to Internet

Hi I installed solaris developer edition 1/08 today.I want to connect to Broadband internet through my ADSL 2+ Modem/Router with a username and password. plz help in this case,I am new to sun solaris:confused: the modem itself is a router it worked well on ubuntu and red hat (3 Replies)
Discussion started by: santugvd
3 Replies

9. Solaris

trying to connect to internet

i have just installed solaris 10 on a 60 gb hard drive. now im trying to install my nic driver but when i put in the floppy disk for the nic card it cant read it, so then i found that i have to mount the floppy drive and i tried putting in the mount command but i dont know where to mount it and if... (38 Replies)
Discussion started by: vutty81
38 Replies

10. UNIX for Dummies Questions & Answers

Cannot connect to the Internet

I running HPUX 11.0, Netscape gives me an error "Unable to locate Server" when using a www.something.com address. If I use an IP address I get past the router and onto the Internet. My workstation can get to the Router @ 192.168.0.1 and also it's local APACHE server. I have DHCP enabled... (8 Replies)
Discussion started by: johnalt
8 Replies
Login or Register to Ask a Question