ILOM and sc on T5220


 
Thread Tools Search this Thread
Operating Systems Solaris ILOM and sc on T5220
# 1  
Old 05-12-2009
ILOM and sc on T5220

I 've 2 different T5220 and both are showing different prompts when i ssh to the console.

1. Shows sc> ALOM
2. Shows -> ILOM

as far as i know the T5220 comes with ILOM , so why i 'm seeing 2 different type of console for same tyep of hardware ?

and i found that we can change ILOM to ALOM cli with following command .. is it possible to go back ?

set /SP/users/admin cli_mode=alom

Last edited by fugitive; 05-12-2009 at 04:07 AM..
# 2  
Old 05-12-2009
To compare versions, type this:

-> version


so you can compare the firmware revision, and see if there's a difference
# 3  
Old 05-12-2009
Firmware is same on both i think its ALOM ILOM diffrerence
# 4  
Old 05-12-2009
Quote:
Originally Posted by fugitive
set /SP/users/admin cli_mode=alom
Try and let us know if it works
# 5  
Old 05-12-2009
HI Incredible,

You are asking me or telling me to use

set /SP/users/admin cli_mode=alom

and i got this from ILOM documentation that if we use

sc> userclimode root default


it will revert back to ILOM .. i just wanted to confirm with you people out there
# 6  
Old 05-12-2009
consult the admin guide for t5220. its all explained: http://dlc.sun.com/pdf/820-3010-11/820-3010-11.pdf
# 7  
Old 05-14-2009
Quote:
Originally Posted by pupp
consult the admin guide for t5220. its all explained: http://dlc.sun.com/pdf/820-3010-11/820-3010-11.pdf
Does not explain on the problem note Smilie
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

Where are my other disks on T5220 ?

Hi, I got a (used) server to install Solaris 11 and wipe out every information on existing disks. There are 6 disks of 300GB and two disks of 146GB. I am not able to figure out, how to find out RAID (if there is any) and break it. Can anybody help me with that ? Below is configuration. I have... (18 Replies)
Discussion started by: solaris_1977
18 Replies

2. Solaris

T5220 ILOM serial number - how to change

Have a T5220 with Oracle SN stickers on outside with one SN, but the ILOM shows a different SN (from another server). It seems this is a issue with T5220's (a co-worker ran into similar problem with 2 of his servers, he just had the ILOM's swapped). Anyone know the command to change the ILOM... (3 Replies)
Discussion started by: RTM
3 Replies

3. Solaris

T5220

Hello guys, can anyone give me some advice on how to perform clean installation of Solaris 10 on T5220 ? I am connected with serial management port on the machine, i have the ok promt and now i should eject the dvdrom to insert Solaris dvd into and start the clean install. So how to do that... (3 Replies)
Discussion started by: tonijel
3 Replies

4. Solaris

T5220

Hi Guys and Gals, Wondering if anyone could help me, tricky one this. Got a T5220 with a graphics card. When you power it on, it outputs its output to the screen and you can type commands with the keyboard etc. But no matter what version of Solaris 10 you use, when you do a boot cdrom... (1 Reply)
Discussion started by: callmebob
1 Replies

5. Solaris

Jumpstart Issues With T5220

I'm trying to use a V210 (sun4u) configured as a jumpstart server to flash install a number of T5220's (sunv4). The Facts: V210 - Solaris 10 (September 2010 Release / not patched) T5220's - Archive's created using prior (unknown) version of solaris 10. Flar -i <archive name> shows the... (6 Replies)
Discussion started by: Celtic_Monkey
6 Replies

6. Solaris

ILOM problem on T5220

I have setup my T5220 ILOM .. and its working fine. But if my network connection is broken to the ILOM i 'm unable to login to the ILOM for few hrs .. it gives me either wrong user/passwd error and after few hrs the same user/passwd works .. what could be the reason for this and how can i resove... (3 Replies)
Discussion started by: fugitive
3 Replies

7. Solaris

T5220 server

Hi, We have two T5220 servers in our datacentre one server is showing 64 processors online and another showing 32 processors online two are newly purchased, there is no hardware faults in this server one server has 64gb memory and it shows 64 processors, and other having 32gb memory and it... (5 Replies)
Discussion started by: rajasekg
5 Replies

8. Solaris

LDOMs on T5220

We're just about to migrate a large application from an Enterprise 6900 to a pair of T5220s utilising LDOMs. Does anyone have any experience of LDOMs on this kit and can provide any recommendations or pitfalls to avoid? I've heard that use of LDOMs can have an impact on I/O speeds as it's all... (9 Replies)
Discussion started by: JerryHone
9 Replies

9. Solaris

SC on T5220 not responding

Hi, SC on one of my T5220 is not responding .. it does not show not let me type anything .. what could be the reason for it ? though when i powercycle the box from sc it shows me the system coming up but after that does not let me login thru sc sc> console -f Enter #. to return to ALOM. (2 Replies)
Discussion started by: fugitive
2 Replies

10. Solaris

kstat on T5220

We used kstat on netra240/440 to check if the link is full duplex. So we do something like: bash-3.00# kstat -pc net bge:1::/'link_duplex'/ | cut -f2 2 The output 2 indicates the link is full duplex. This kind of check worked all right for Netra 240/440 systems. However, the nxge... (2 Replies)
Discussion started by: illcar
2 Replies
Login or Register to Ask a Question