Search Results

LSI driver installed, old file system mounted on /mnt (done)
but when i try to (cp -rp etc /home) as a trial before copy it on the /mnt error occured and the /etc not copped correctly !!

i already have the driver and tried the pkgadd -d but error occurred and cannot be installed

---------- Post updated at 02:07 PM ---------- Previous update was at 01:55 PM ----------

D2616...

the new system disk is connected separetly on sata on board port and the old hard disks connected sas on backplane that coneccted to the Raid mega sas card LSI

---------- Post updated at 01:16 PM...

sorry but i dont understand how to install the raid controller after i installed the sco unisxware on the sata disk ? and then let all hard disk see each others ?!!
i'm afraid to lose the old raid...

dear jgt
i already connected sata new disk on the onboard sata port, and i will install the sco unixware 7.1.4 on it , i already disconnected the back plane of the original disks, i booted from CD...

thanks for your fast reply i really appreciated.
now the steps will be :
1- adding the new sata disk in tray 3 as i have already 3 disks, 2 RAID1(system) and 1 RAID0
2- configuring the new disk...

but all hard disks i have is sata i dont have an ide hard disk so how to do this solution with new sata hard disk ? i already have 2 new sata hard disks for any workarounds

what do you mean by removing the LSI and install new hard disk ?
now i prepared new hard disk do that but i need more details about this solution.
if i removed the LSI it means all data on the...

thanks so much for your kind care about my problem case, kindly do you have document steps but for Sco unixware 7.1.4 not for openserver ?

the media is not corrupted i used CD and usb floppy and USB flash ,i have the driver and i already downloaded it again but the same error msg,i think the problem is not the device or the media !!...

when i try to boot from sco unixware 7.1.4 CD and try to install my LSA SAS driver (error cannot mount the Hba Driver)as attached, and this is the same driver i installed it before and i'm sure that...

Errors on /ets and unix cannot load, any help ?

Hello Dears,
I have fujitsu tx300 S7 server with installed sco unixware 7.1.4,
Now the /etc is corrupted and the sco cannot boot.
There is no emergency disk or cd, I'm trying to fix this with...