Search Results

Hi,

I need to Change passwd for bulk servers using SSH script.

I have one server, from which i can reach all the servers without password via SSH.

There is some expect script, from which i...

There will be a smart start CD with the server, you need to install OS via that CD, you will also get list of supported OS in the wizard.

# mt stat
HP DDS-4 DAT (Sun) tape drive:
sense key(0x0)= No Additional Sense residual= 0 retries= 0
file no= 0 block no= 0


mt -f /dev/rmt/0mn erase
/dev/rmt/0mn: write protected...

# mt stat
HP DDS-4 DAT (Sun) tape drive:
sense key(0x0)= No Additional Sense residual= 0 retries= 0
file no= 0 block no= 0


mt -f /dev/rmt/0mn erase
/dev/rmt/0mn: write protected...

Add the route in your init script, create a init script for the routes
eg:
vi /etc/rc2.d/S76static-routes
chmod 755 /etc/rc2.d/S76static-routes

Reboot and check the routes are added or not

No need to install boot block on the mirrored HDD, i have tested the same on solaris 10, V240 SPARC machine.

add mirrored disk in boot-device variable.

like ...

bash-3.00# eeprom | grep...

Ohh K......

Its a SPARC machine, with solaris 10.

Also in x86 the command the different like
/sbin/installgrub /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c0d0s0

So according to you,...

But as per SUN, they have not mentioned to installboot block.

Is it required in Solaris 10??

Sun mirroring steps http://www.sun.com/bigadmin/content/submitted/svm_mirroring.jsp


15)...

I have setup mirroring for root disk.

As per Sun SVM process, there is no need to installbootblk
BigAdmin Submitted Tech Tip: Boot Disk Mirroring Using Solaris Volume Manager Software...

As per Sun SVM process, there is no need to installbootblk
BigAdmin Submitted Tech Tip: Boot Disk Mirroring Using Solaris Volume Manager Software...