Configuare Network SCO UNIX 5.0.7 on Vmware


 
Thread Tools Search this Thread
Operating Systems SCO Configuare Network SCO UNIX 5.0.7 on Vmware
# 1  
Old 09-17-2015
Configuare Network SCO UNIX 5.0.7 on Vmware

hi
i installed sco unix open server 5.0.7 on virtual machine vmware and runing it,
its work perfect and good.
now how i can configuare network at scoadmin that i able to access nework ?

---------- Post updated at 08:56 AM ---------- Previous update was at 01:47 AM ----------

nobody can help me how i cofigure network on vmware to access network ?
vmware have on network adapter that connected to this matchine but i dont know how may i use it
# 2  
Old 09-17-2015
I don't understand your problem.
scoadmin is a menu driven procedure. If you select 'networks' then 'network configuration', you just have to fill in the blanks.
Unless you don't have a driver installed for the network card.
And by the way, not everybody lives in the same time zone as you.
This User Gave Thanks to jgt For This Post:
# 3  
Old 09-20-2015
i mean that
i installed sco unix on vmware machine. now whats network adapter i must install ? i mean this is not reall matchine with real network adapter. its virtual matchine. i dont know what network adaptor i must install and how configure network

---------- Post updated 09-20-15 at 02:35 AM ---------- Previous update was 09-19-15 at 07:50 AM ----------

nobody can help me ?
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. SCO

Can not recognize network adapter SCO UNIX in HP z400

hi .I've installed an operating system SCO in HP Z400 and network cards ZyXEL model FN312 with Chipset RTL8139D put it on .network card installed but do not display network card with command ifconfig -a in list and just show loopback. show message : dlpid:unable to open network adapter driver... (14 Replies)
Discussion started by: moein.mojtaba
14 Replies

2. UNIX for Advanced & Expert Users

SCO 6.0 & VMware problems

I've moved a physical server over to VMWare ESXi 5.1 using SCO 6.0 with MP4. For whatever reason, people are occasionally getting kicked out or are closing out their telnet session and it is leaving their processes running. When this happens, the sar %idle drops from 98-95% down to 25-20%. ... (1 Reply)
Discussion started by: Carlitos71
1 Replies

3. SCO

VMware and SCO Unixware 7.1.4 Network issue

I am haveing a problem with my VMware ESXi 4.1 server and a virtual SCO UnixWare 7.1.4 server that I need for a legacy application for my company. The problem seems simple but I can't find a solution. The UnixWare (UW) server is a clean install and patched as SCO recommends. I am able to telnet to... (1 Reply)
Discussion started by: DudeCrush
1 Replies

4. UNIX for Advanced & Expert Users

Vmware 7 unixware 7.13 network problems

i need help, i will always accord mine if my scope allows me, help me in this one.. am running vmware 7.0 in winserver 2008 on a cq61-425el, my network driver is installed correctly. and my vmware network drivers have added as well (in the device manager section). During installation i wasnt... (0 Replies)
Discussion started by: baitz
0 Replies

5. UNIX for Dummies Questions & Answers

SCO and VMware

Hello all, I'm trying to run an old SCO 5.0.4 server into VMWare workstation (and later, ESX). I've used Ghost to dump the entire image into the virtual disk, and of course it won't start since the SCSI drivers need to be replaced. Now I've tried to boot the virtual system with a generic... (13 Replies)
Discussion started by: Jeroenix
13 Replies

6. SCO

all tcp are CLOSED on SCO Unix on VMWARE

Hi folks, First of all, sorry about my english, isn't the best and thks for advance. Here es my problem... I have virtualize an SCO unix with VMware ESX 3 and everything was going on beatifull until that i try to connect from anorther host, i can't do it so i check the connection with... (5 Replies)
Discussion started by: martocapo
5 Replies

7. SCO

SCO Unix Network Configuration

Hello Guys, We have an old PC running on SCO Unix V. Is there any sites where i can get manual/procedures on how to install and configure Network. Thanks (2 Replies)
Discussion started by: nrcuevas
2 Replies

8. SCO

Sco Unix network issues

I have got a Sco Unix Server, i want to connect some windows workstations. What configurations do i need to make on server and or workstation? (1 Reply)
Discussion started by: tpurazi1
1 Replies

9. UNIX for Dummies Questions & Answers

SCO Unix and Two Network Cards

Our shops server runs SCO Openserver 5 release 5. It has two network cards in it (one on 10.0.0.6 and one on 90.0.0.99). When I run scoadmin and look at the network settings it show both my 3com network cards and a loop back driver http://theentertainer.com/james/untitled.jpg Can anyone tell... (1 Reply)
Discussion started by: potter
1 Replies
Login or Register to Ask a Question