---------- Post updated at 10:07 AM ---------- Previous update was at 07:28 AM ----------
They are setup as netcat
Below is the directory...
Code:
# cd /usr/spool/lp/admins/lp/interfaces
# l
total 14
-rwxrwxr-x 1 lp lp 1270 Aug 7 12:53 PR_1
-rwxrwxr-x 1 lp lp 1270 Aug 5 19:48 PR_3
-rwxrwxr-x 1 lp lp 1270 Aug 6 22:10 PR_4
drwxr-xr-x 2 root sys 512 Aug 7 12:43 model.orig
---------- Post updated at 10:40 AM ---------- Previous update was at 10:07 AM ----------
Quote:
Originally Posted by jim mcnamara
First off - what UNIX/Linux is this? The commands for administering lp are not all the same everywhere.
Next - are the network printers on a print server or two somewhere out there? Network topology is very important here.
The Unix is running sco 5.0.7 Open Server
The network printers are on print servers.
The printers are setup in "scoadmin"
They are configured in "/etc/hosts" and "/etc/printers".
All are pointing to the correct settings.
---------- Post updated at 10:50 AM ---------- Previous update was at 10:40 AM ----------
They are setup as netcat printers
Below is the the directory listing
Code:
-rwxrwxr-x 1 lp lp 1270 Aug 7 12:53 PR_1
-rwxrwxr-x 1 lp lp 1270 Aug 5 19:48 PR_3
-rwxrwxr-x 1 lp lp 1270 Aug 6 22:10 PR_4
---------- Post updated at 11:14 AM ---------- Previous update was at 10:50 AM ----------
I have rebooted the server.
No luck.
Last edited by rbatte1; 08-10-2015 at 07:00 AM..
Reason: Added CODE tags
Hi
I have some sco xenix object, bin and archive files that operate in sco unix 5.0.7.
I know that sco unix kernel can support sco xenix binary. I want to know how can I link xenix and unix archives together? (0 Replies)
another unix printing issue.
our client based pc's used to print some form's to our hp printer. as of the moment they can not print.
i have checked & did the ff:
#lpstat -r (scheduler is running)
i dunno if i need to restart the whole unix box via shutdown or just checking at... (15 Replies)
I use software in Unix, I am trying to edit the file before final printing. Because the software only let me enter the data into, then print out, during printing, unix will save file buffer in some where to be ready print, if now I cancel the printing job, the file's buffer should be in spool, and... (3 Replies)
HI all,
I was looking for Print Spooler products for Unix. Basically our requirement is to be able to send jobs to the spool "holded", change printing properties, view a list of jobs to be printed (based on some criteria), send a job to be printed (release) and view the contents of a specific... (1 Reply)
:confused: Everytime our UNIXWARE 7 Server is restarted we also have to restart the spooler. If the spooler is not restarted, print jobs get stuck in the queu. Once restarted by using the following command lpstop and lpstart everything works fine.
Does anyone have any ideas what could be causing... (0 Replies)
Hello Moto
I hope someone can help
We's here at work, have a unix box with sco openserver 5 on it, so it has a nice gui interface.. and also a fair few windows computers..
a system admin guy b4 me, has set up a user called neil, which can, when u try to access the unix box using windows... (2 Replies)
W eare currently running a Unix printer spooler and HP Deskjet printers. We are trying to set up a printer on the spooler server, but are getting connection errors. While we are able to ping and telnet to the relevant HP printer, we cannot set them up. Response: -
The HP JetDirect Printer... (0 Replies)
Greetings,
I have encountered the following errors and printing stops frequently.
" ERROR 45 FROM LOCKF CALL ON FILE OUTPUTQ".
I restart the spooler repeatedly but that is not a permanent solution. Please give me your usual assistance.
With regards,
Wobitu (2 Replies)
Hi everyone i have a question for all of you. It may be basic or it may be a good one. I recently aquired a copy of "SCO TCP/IP runtime System for SCO Unix" (thats what the disks say) and for the life of me i can not get it to load. i have tried opening the disk in linux and it can not determine... (0 Replies)
