missing raid array after reboot


 
Thread Tools Search this Thread
Operating Systems Linux Red Hat missing raid array after reboot
# 1  
Old 06-08-2011
missing raid array after reboot

Dear all ,

i ve configured raid 0 in redhat machine(VM ware), by following steps:

Code:
#mdadm -C /dev/md0 -l 0 -n 2 /dev/sdb1 /dev/sdc1 
#mkfs.ext3 /dev/md0 
#mdadm --detail --scan --config=mdadm.conf >/etc/mdadm.conf

then
mounted the/dev/md0 device and also added a entry in fstab.

how the isssue is when the system rebooted the raid array configuration is missing, there is no device as /dev/md0..
what's the solution for this??? any help !!!!

Last edited by pludi; 06-08-2011 at 07:06 AM.. Reason: content editing...
# 2  
Old 06-09-2011
Did u checked whether your disks (sd [b|c] ) are available after the reboot...
# 3  
Old 06-09-2011
Quote:
Originally Posted by oky
Did u checked whether your disks (sd [b|c] ) are available after the reboot...
yep... i couldnt find any disk array but the disks(sd [b|c] ) are available!!!
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Revive RAID 0 Array From Buffalo Duo NAS

Thank you in advanced, I had a Buffalo DUO crap out on me that was setup as RAID 0. I dont belive it was the drives but rather the controller in the DUO unit. I bought another external HDD enclosure and was able to fireup the two older DUO drives in it and I think I resembled the RAID... (12 Replies)
Discussion started by: metallica1973
12 Replies

2. Solaris

Solaris 10 Installation - Disks missing, and Raid

Hey everyone. First, let me start by saying I'm primarily focused on linux boxes, and just happened to get pulled into building two T5220's. I'm not super educated on sun boxes. Both T5220's have 8 146GB 15k SAS drives. Inside the service processor, I can run SHOW /SYS/HDD{0-7} and they all come... (2 Replies)
Discussion started by: msarro
2 Replies

3. Fedora

Missing entries in log files just before/after reboot

Hello world, One of the servers, a Fedora one,rebooted today (Luckily, a testbox). I tried to get the reason the server rebooted. After going through the messages, I think that the log entries just before and after reboot are missing. Please below: (****** is the server name, for privacy... (0 Replies)
Discussion started by: satish51392111
0 Replies

4. Solaris

How to find missing disks on Sun x4150 without reboot?

Hi, Here is the issue: There are 4 disks on this Sun x4150 system under Solaris 10, but only 1 disk can be seen by the OS. I've tried commands disks and devfsadm but not working. It's an important production server, so 'reboot -r' is not a choice. # format < /dev/null Searching for... (6 Replies)
Discussion started by: aixlover
6 Replies

5. Emergency UNIX and Linux Support

Loading a RAID array after OS crash

One of my very old drive farm servers had an OS fault and can't boot now but I'd like to restore some files from it. I tried booting Ubuntu from a CD, but it couldn't see the drives -- possibly because they're RAIDed together. Is there a good way to get at my files? The data in question is a... (2 Replies)
Discussion started by: CRGreathouse
2 Replies

6. Solaris

EFI Disk labels on 3510 raid array

Hi Peeps, Can anyone help me an EFI lablel on a 3510 raid array that I cannot get rid of, format -e and label just asks you if you want to label it. Want an SMI label writing to it. Anyone got any ideas on how to remove the EFI label? Thanks in advance Martin (2 Replies)
Discussion started by: callmebob
2 Replies

7. UNIX for Advanced & Expert Users

Create RAID - Smart Array Tool - ML370

Hi guys, i must install an old old old ml370 server... I must create a RAID 5 with my 4 SCSI disk. I need a SmartStart disk for create it or a Floppy Disk called "Array configuration Tool". I don't find it on the hp website...:mad::mad::mad: Anyone have it?? Thanks in advance. Zio (0 Replies)
Discussion started by: Zio Bill
0 Replies

8. AIX

RAID level of array = false?

I created a RAID 5 array and when I list out the attributes of the "hdisk" it reports back raid_level = 5 but the RAID level of the array = false. What does this actually indicate about my array? I've never paid much attention to this until now since I have a disk reporting failure I want to make... (0 Replies)
Discussion started by: scottsl
0 Replies

9. UNIX for Advanced & Expert Users

Percent complete error while scanning RAID array during 5.0.6 load

Percent complete SCO 5.0.6 / No longer an issue (0 Replies)
Discussion started by: Henrys
0 Replies
Login or Register to Ask a Question