Why am i getting these strange packets while running my packet capture module written in c.?


 
Thread Tools Search this Thread
Top Forums Programming Why am i getting these strange packets while running my packet capture module written in c.?
# 1  
Old 02-11-2013
Why am i getting these strange packets while running my packet capture module written in c.?

I have made an packet capture application running on intel machine, it is capturing packets with src address- 17.0.0.0 destination ip- 66.0.0.0, source port- 0, destination port- 0, and protocol- 0 what does these packets mean ?
The code written to interpreter captured bytes is given below. Which basically locate source address, destination address, source port, destination port, and protocol from various headers from packet captured. After it is done then only TCP and UDP packets are stored into a file. so it means only those packets having protocol number 6,17 should be saved but when i go through the file the packets with protocol 0,20,255,100,8,66 are also saved more over strange IP address are also seen like.2.8.2.8, 17.0.0.0, 66.0.0.0, 0.0.0.0 etc what are these packets, am i correct in my approach.
Code:
 inline u_int32_t hash_function(const u_char *packet, int pkt_len) 
{
  u_int32_t hash=0;
  u_int8_t next_protocol;
  u_int32_t src_ip,dst_ip;  
  u_short  src_p,dst_p;       
  
  
  unsigned short ip_hdr_len;
  
      // Checking if it is a IPv4 or IPv6 packet
    struct ether_header *eptr;  /* net/ethernet.h */
    eptr = (struct ether_header *) packet;

    if (ntohs (eptr->ether_type) == ETHERTYPE_IP) // means it is IPv4 pkt
        {
            struct iphdr *ip4h = (struct iphdr *)(packet  + sizeof(struct ethhdr) );
        ip_hdr_len =ip4h->ihl*4;
        next_protocol=ip4h->protocol;
        pktFeatures.src_ip=ntohl(ip4h->saddr);
        pktFeatures.dst_ip=ntohl(ip4h->daddr);
        pktFeatures.pkt_len=pkt_len;
        switch (next_protocol) //Check the Protocol and do accordingly...
        {
        case 6:  //TCP Protocol
               {
                struct tcphdr *tcph=(struct tcphdr*)(packet + ip_hdr_len + sizeof(struct ethhdr));
                pktFeatures.src_p=ntohs(tcph->th_sport);
                pktFeatures.dst_p=ntohs(tcph->th_dport);
                pktFeatures.protocol=next_protocol;
                writeBytes((char *)&pktFeatures,sizeof(struct packet_features),WRITE_TO_FILE);
            }
            break;
        case 17: //UDP Protocol
            {
                struct udphdr *udph = (struct udphdr*)(packet + ip_hdr_len  + sizeof(struct ethhdr));
                pktFeatures.src_p=ntohs(udph->uh_sport);
                pktFeatures.dst_p=ntohs(udph->uh_sport);
                pktFeatures.protocol=next_protocol;
                writeBytes((char *)&pktFeatures,sizeof(struct packet_features),WRITE_TO_FILE);                 
            }
            break;
        default: //Some Other Protocol like ARP FTP etc.
            {
                printf(" * Some Other Protocol \n");
                            
            }
        }
        int rm=0;
        }/*else  if (ntohs (eptr->ether_type) == ETHERTYPE_IPV6) // means it is IPv6 pkt
            {
                
            u_int32_t *s, *d;
            struct ip6_hdr *ip6h = (struct ip6_hdr *)(packet  + sizeof(struct ethhdr) );
            ip_hdr_len=320;
            next_protocol=ip6h->ip6_un1_nxt; // is the next protocol type
            s = (u_int32_t *) &ip6h->ip6_src, d = (u_int32_t *) &ip6h->ip6_dst;
            hash=(s[0] + s[1] + s[2] + s[3] + d[0] + d[1] + d[2] + d[3]+ip6h->ip6_un1_nxt); // ip6_un1_nxt is the next protocol                                         type TCP/UDP can be extention header ? need to be catered for
             
            }else hash=0;
         */
         
 return hash;

}

# 2  
Old 02-11-2013
Maybe not IP packets?

Is it different if you check for ipv6 explicitly?

Last edited by DGPickett; 02-11-2013 at 03:16 PM..
# 3  
Old 02-12-2013
I am not capturing IPv6 packets at present.Only IPv4 packets are being dealt with. i am differentiating them using
Code:
if (ntohs (eptr->ether_type) == ETHERTYPE_IP)

# 4  
Old 02-12-2013
Oh, right. Protocol 0 is ipv6 except that is laid out differently, I expect: List of IP protocol numbers - Wikipedia, the free encyclopedia

Junk packets? Chase the source down!
# 5  
Old 02-13-2013
I see nothing wrong with how you assign packet structures or accessing them, I think there is something wrong with how you save/display them. What is 'pktFeatures'? I guess it has to be a global variable because I do not see you defining/declaring it anywhere in the code snippet. Should not use global variables in critical parts like this because they can not be put into registers, meaning code is not going to be anywhere as fast as with local variables, also your code automatically is not thread/signal safe.
# 6  
Old 02-13-2013
If you telnet through, does it show right? TCP syn ack fin would be nice to have.
Login or Register to Ask a Question

Previous Thread | Next Thread

8 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

How many packets can be written into Kernel sockets per second?

Hi, Its been a long time since i programmed a multithreaded application that can do Tx and Rx of datagrams over unix sockets. I well remember that though the threads were efficiently designed to be independent of each other, and was writing to different sockets, there was a limitation ,... (0 Replies)
Discussion started by: binnyjeshan
0 Replies

2. Programming

Linking Linux Driver written in C with ASM module

Hi, I have got sample linux driver written in C. I got also some assembly code, compiled into .o file (using as compiler). In my Makefile I got: obj-m += someDriver.o someDriver-objs := CFile1.o CFile2.o ASMFile.o default: $(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modulesUnfortunatelly I cannot... (0 Replies)
Discussion started by: Chrisdot
0 Replies

3. Programming

packet capture

can anyone tell me how can i capture the packets. i have tried ethernet software to capture them but its not doing what i want it to do it (1 Reply)
Discussion started by: dazdseg
1 Replies

4. Programming

Receiving broadcast packets using packet socket

Hello I try to send DHCP RENEW packets to the network and receive the responses. I broadcast the packet and I can see that it's successfully sent using Wireshark. But I have difficulties receiving the responses.I use packet sockets to catch the packets. I can see that there are responses to my... (0 Replies)
Discussion started by: xyzt
0 Replies

5. IP Networking

Capture packets (TcpDump) and forwarding them

Hi, I want to capture a certain type of packets (selected according to the protocol) coming to my PC and then transmit them to another PC. I had the idea to use tcpdump to filter input packets and extract those chosen. Well my questions are: 1- after filtering input packets, those that have not... (1 Reply)
Discussion started by: ziedf
1 Replies

6. Infrastructure Monitoring

capture snmp packets in AIX

Hi, I want to capture snmp packets in AIX. When i give print from AIX6.1, Printer will give its response thru' snmp. I used iptrace command like below, but it is not capturing snmp packets other packets are captured like udp, tcp.. 1. iptrace command: /usr/sbin/iptrace -a -i en0... (1 Reply)
Discussion started by: meeraramanathan
1 Replies

7. AIX

Capture Network Packets from AIX

Hi, I am using smitty to create and configure a print queue. I am giving a print of a text file to the print queue created. I am using this in network. How to capture network packets of the print from AIX to the printer and printer to AIX. I tried Wireshark to capture network packets. I am... (16 Replies)
Discussion started by: meeraramanathan
16 Replies

8. UNIX for Dummies Questions & Answers

how to capture multicast packets using snoop

How do I use snoop command to capture multicast packets in the network? (1 Reply)
Discussion started by: caden312
1 Replies
Login or Register to Ask a Question