fcp(7D) Devices fcp(7D)NAME
fcp - Fibre Channel protocol driver
DESCRIPTION
The fcp driver is the upper layer protocol that supports mechanisms for transporting SCSI-3 commands over Fibre Channel. The fcp driver,
which interfaces with the Sun Fibre Channel transport library fctl(7D), supports the standard functions provided by the SCSA interface.
FILES
/kernel/drv/fcp
32-bit ELF kernel driver (x86)
/kernel/drv/amd64/fcp
64-bit ELF kernel driver (x86)
/kernel/drv/sparcv9/fcp
64-bit ELF kernel driver (SPARC)
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |SPARC |
+-----------------------------+-----------------------------+
|Interface stability |Unknown |
+-----------------------------+-----------------------------+
|Availability |SUNWfcp |
+-----------------------------+-----------------------------+
SEE ALSO prtconf(1M), driver.conf(4), fctl(7D), fp(7D), usoc(7D)
Writing Device Drivers
Fibre Channel Physical and Signaling Interface (FC-PH) ANSI X3.230: 1994
Fibre Channel Generic Services (FC-GS-2) Project 1134-D
Fibre Channel Arbitrated Loop (FC-AL) ANSI X3.272-1996
Fibre Channel Protocol for SCSI (FCP) ANSI X3.269-1996
SCSI-3 Architecture Model (SAM) Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA) ANSI X3.270-1996
Fabric Loop Attachment (FC-FLA), NCITS TR-20:1998
SunOS 5.10 20 Oct 2004 fcp(7D)
Check Out this Related Man Page
qlc(7D) Devices qlc(7D)NAME
qlc - ISP2200, ISP2300, and SP212 Family Fibre Channel host bus adapter driver.
SYNOPSIS
SUNW,qlc
DESCRIPTION
The qlc host bus adapter driver is a Sun Fibre Channel transport layer-compliant nexus driver for the Qlogic ISP2200, ISP2200A, ISP2310,
ISP2312, and SP212 adapters. These adapters support Fibre Channel SCSI and IP Protocols, FC-AL public loop profile, point-to-point fabric
connection and Fibre Channel service classes two and three (see NOTES section below).
The qlc driver interfaces with the Sun Fibre Channel transport layer to support the standard functions provided by the SCSA interface. It
supports auto request sense and tagged queueing by default. The driver requires that all devices have unique hard addresses in private
loop configurations. Devices with conflicting hard addresses are not accessible.
FILES
/kernel/drv/qlc 32-bit ELF kernel module (x86)
/kernel/drv/amd64/qlc 64-bit ELF kernel module (x86)
/kernel/drv/sparcv9/qlc 64-bit ELF kernel module (SPARC)
/kernel/drv/qlc.conf Driver configuration file
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |SPARC, x86 |
+-----------------------------+-----------------------------+
|Availability |SUNWqlc |
+-----------------------------+-----------------------------+
SEE ALSO prtconf(1M), driver.conf(4), fcp(7D), fp(7d)
Writing Device Drivers
ANSI X3.230:1994, Fibre Channel Physical Signaling (FC-PH)
Project 1134-D, Fibre Channel Generic Services (FC-GS-2)
ANSI X3.269-1996, Fibre Channel Arbitrated Loop (FC-AL)
ANSI X3.270-1996, Fibre Channel Protocol for SCSI (FCP-SCSI)
ANSI X3.270-1996, SCSI-3 Architecture Model (SAM)
Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA)
Fabric Loop Attachment (FC-FLA)
ISP2200 Firmware Interface Specification, QLogic Corporation
ISP2300 Series Firmware Specification, QLogic Corporation
NOTES
SP-212-based host bus adapters (including QLA-210) are supported on x86 platforms only and are limited to a maximum of 8 targets in fab-
ric and sixteen targets in local loop topology. FL topology is not supported with the SP-212-based host bus adapter.
SunOS 5.11 21 Feb 2005 qlc(7D)