cannaserver(1m) [suse man page]

CANNASERVER(1M) 														   CANNASERVER(1M)

NAME

       cannaserver - Kana-Kanji conversion server

SYNOPSIS

       cannaserver [-d] [-u userid] [-inet] [-inet6] [-l n] [-syslog] [-p num] [ddpath]

DESCRIPTION

       cannaserver(1M)	provides  the  Kana-Kanji  conversion  service.   Most commonly this daemon starts at daemon bootup framework like /etc/rc
       depending on your system, so you do not usually start it up manually.

       By default, cannaserver(1M) only accepts connections from clients at the same host where the server is running (via  UNIX  domain  socket).
       You  can  make  it  accessible  from other hosts via TCP by using option -inet (or -inet6). Whether you use this option or not, you can get
       access control based on user and host using /etc/hosts.canna.

       cannaserver(1M) immediately forks and gets into the background after it starts.	You do not need to use '&' explicitly to make  it  run	in
       the background.

       When  it starts, cannaserver(1M) creates the UNIX domain socket /tmp/.iroha_unix/IROHA[:num] to communicate clients.  The socket is deleted
       automatically if cannaserver(1M) terminates normally.  The socket may exist while cannaserver(1M) is not  running  (because,  for  example,
       cannaserver(1M) terminated abnormally).	In this case, delete the file manually or you cannot start it.

       /var/lib/canna/dic/*/dics.dir  includes	the  list of dictionaries which are available to clients. Users (i.e. clients) can choose which to
       use and specify them in ~/.canna.

OPTIONS

       ddpath	   Specifies the directory that contains dictionaries.

       -inet	   This option lets cannaserver(1M) accept connections from remote hosts using inet domain socket (IPv4).  By  default,  the  can-
		   naserver(1M) uses only UNIX domain socket, i.e. only clients in your local machine can connect to the server.

       -inet6	   Enable  IPv6. If this option is used solely, IPv4 access is disabled.  If you want to use IPv4 at the same time, use both -inet
		   and -inet6.

       -l n	   Outputs the cannaserver(1M) log to /tmp/canna.log.  n (1 to 5) specifies the log level.

       -d	   Starts cannaserver(1M) in debug mode.  It is executed as the foreground process.  Log data at log level  5  is  output  to  the
		   standard output.

       -u userid   Specifies which user cannaserver(1M) runs as.  By default, cannaserver(1M) runs as the user who started cannaserver(1M).

       -syslog	   Outputs the cannaserver(1M) log to syslogd(8). If you specify this option, logs are not output to /var/log/canna/CANNA?msgs.

       -p num	   By this option cannaserver(1M) uses the port number 5680 + num. The default port number is 5680. This option also has an effect
		   on the filename of the socket and the log file. See below.

FILES

       /tmp/.iroha_unix/IROHA[:num]
	       Socket. [:num] part is added only when you specify -p.

       /var/lib/canna/dic/*/dics.dir
	       Dictionary directory

       /etc/hosts.canna
	       Access control file

       /var/log/canna/CANNA?msgs
	       Log file. "?" is replaced with num specified with -p, and defaults to 0 without -p num.	Log messages are not output to	this  file
	       when -syslog is specified.

SEE ALSO

       cannakill(1M), cannastat(1), cannacheck(1), cshost(1)

																   CANNASERVER(1M)

Check Out this Related Man Page

RTMON(8)						      System Manager's Manual							  RTMON(8)

NAME

       rtmon - listens to and monitors RTnetlink

SYNOPSIS

       rtmon [ options ] file FILE [ all | LISTofOBJECTS ]

DESCRIPTION

       This manual page documents briefly the rtmon command.

       rtmon listens on netlink socket and monitors routing table changes.

       rtmon can be started before the first network configuration command is issued.  For example if you insert:

       rtmon file /var/log/rtmon.log

       in  a  startup  script, you will be able to view the full history later.  Certainly, it is possible to start rtmon at any time. It prepends
       the history with the state snapshot dumped at the moment of starting.

OPTIONS

       rtmon supports the following options:

       -Version
	      Print version and exit.

       help   Show summary of options.

       file FILE [ all | LISTofOBJECTS ]
	      Log output to FILE. LISTofOBJECTS is the list of object types that we want to monitor.  It may contain  'link',  'address',  'route'
	      and  'all'.  'link' specifies the network device, 'address' the protocol (IP or IPv6) address on a device, 'route' the routing table
	      entry and 'all' does what the name says.

       -family [ inet | inet6 | link | help ]
	      Specify protocol family. 'inet' is IPv4, 'inet6' is IPv6, 'link' means that no networking protocol is  involved  and  'help'  prints
	      usage information.

       -4     Use IPv4. Shortcut for -family inet.

       -6     Use IPv6. Shortcut for -family inet6.

       -0     Use a special family identifier meaning that no networking protocol is involved. Shortcut for -family link.

USAGE EXAMPLES

       # rtmon file /var/log/rtmon.log
	      Log to file /var/log/rtmon.log, then run:

       # ip monitor file /var/log/rtmon.log
	      to display logged output from file.

SEE ALSO

       ip(8)

AUTHOR

       rtmon was written by Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>.

       This manual page was written by Michael Prokop <mika@grml.org>, for the Debian project (but may be used by others).

																	  RTMON(8)

Linux and UNIX Man Pages

cannaserver(1m) [suse man page]

Check Out this Related Man Page