ifdhcontrol(3smartca) [sunos man page]
IFDHControl(3SMARTCARD) Smartcard Library Functions IFDHControl(3SMARTCARD) NAME
IFDHControl - send control information to an IFD SYNOPSIS
#include <smartcard/ifdhandler.h> RESPONSECODE IFDHControl(DWORD Lun, PUCHAR TxBuffer, DWORD TxLength, PUCHAR RxBuffer, PDWORD RxLength); PARAMETERS
The IFDHControl() function takes the following parameters: Input Lun Logical Unit Number TxBuffer Control bytes to send TxLength Length of bytes to send RxLength Expected length of response Output RxBuffer Buffer to receive response RxLength Length of response received DESCRIPTION
The IFDHControl() performs control information exchange with some types of readers such as PIN pads, biometrics, and LCD panels according to the MCT and CTBCS specification. This function does not exchange data with the card. RETURN VALUES
The following values are returned: IFD_SUCCESS Successful completion. IFD_RESPONSE_TIMEOUT The response has timed out. IFD_COMMUNICATION_ERROR An error has occurred. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ SEE ALSO
IFDHCreateChannelByName(3SMARTCARD), attributes(5) NOTES
This manual page is derived from the MUSCLE PC/SC IFD Driver Developer Kit documentation. License terms and attribution and copyright information for this interface are available at the default location /var/sadm/pkg/SUNWocfh/install/copyright. If the Solaris Operating Environment has been installed anywhere other than the default location, modify the path to access the file at the installed location. SunOS 5.10 4 Dec 2002 IFDHControl(3SMARTCARD)
Check Out this Related Man Page
IFDHSetProtocolParameters(3SMARTCARD) Smartcard Library Functions IFDHSetProtocolParameters(3SMARTCARD) NAME
IFDHSetProtocolParameters - set protocol parameters SYNOPSIS
#include <smartcard/ifdhandler.h> RESPONSECODE IFDHSetProtocolParameters(DWORD Lun, DWORD Protocol, UCHAR Flags, UCHAR PTS1, UCHAR PTS2, UCHAR PTS3); PARAMETERS
The IFDHSetProtocolParameters() function takes the following parameters: Input Lun Logical Unit Number Protocol Desired protocol Flags The bitwise-inclusive OR of the flags PTS1 1st PTS Value PTS2 2nd PTS Value PTS3 3rd PTS Value DESCRIPTION
The IFDHSetProtocolParameters() function sets the Protocol Type Selection (PTS) of the slot or card using the three PTS values as defined in ISO 7816. The Protocol parameter can take an integer value between 0 and 14, inclusive, corresponding to the protocol T=0, T=1, ..., T=14. The Flags parameter can have the value of one of the following or the bitwise-inclusive OR of two or more of the following: IFD_NEGOTIATE_PTS1 Use the PTS1 value. IFD_NEGOTIATE_PTS2 Use the PTS2 value. IFD_NEGOTIATE_PTS3 Use the PTS3 value. RETURN VALUES
The following values are returned: IFD_SUCCESS Successful completion. IFD_COMMUNICATION_ERROR An error occurred. IFD_ERROR_PTS_FAILURE The PTS value could not be set. IFD_PROTOCOL_NOT_SUPPORTED The protocol is not supported. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ SEE ALSO
IFDHCreateChannelByName(3SMARTCARD), attributes(5) NOTES
This manual page is derived from the MUSCLE PC/SC IFD Driver Developer Kit documentation. License terms and attribution and copyright information for this interface is available at the default location /var/sadm/pkg/SUNWocfh/install/copyright. If the Solaris Operating Environment has been installed anywhere other than the default location, modify the path to access the file at the installed location. SunOS 5.10 4 Dec 2002 IFDHSetProtocolParameters(3SMARTCARD)