fwrite(3p) [posix man page]
FWRITE(3P) POSIX Programmer's Manual FWRITE(3P) PROLOG
This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (consult the correspond- ing Linux manual page for details of Linux behavior), or the interface may not be implemented on Linux. NAME
fwrite -- binary output SYNOPSIS
#include <stdio.h> size_t fwrite(const void *restrict ptr, size_t size, size_t nitems, FILE *restrict stream); DESCRIPTION
The functionality described on this reference page is aligned with the ISO C standard. Any conflict between the requirements described here and the ISO C standard is unintentional. This volume of POSIX.1-2008 defers to the ISO C standard. The fwrite() function shall write, from the array pointed to by ptr, up to nitems elements whose size is specified by size, to the stream pointed to by stream. For each object, size calls shall be made to the fputc() function, taking the values (in order) from an array of unsigned char exactly overlaying the object. The file-position indicator for the stream (if defined) shall be advanced by the number of bytes successfully written. If an error occurs, the resulting value of the file-position indicator for the stream is unspecified. The last data modification and last file status change timestamps of the file shall be marked for update between the successful execution of fwrite() and the next successful completion of a call to fflush() or fclose() on the same stream, or a call to exit() or abort(). RETURN VALUE
The fwrite() function shall return the number of elements successfully written, which may be less than nitems if a write error is encoun- tered. If size or nitems is 0, fwrite() shall return 0 and the state of the stream remains unchanged. Otherwise, if a write error occurs, the error indicator for the stream shall be set, and errno shall be set to indicate the error. ERRORS
Refer to fputc(). The following sections are informative. EXAMPLES
None. APPLICATION USAGE
Because of possible differences in element length and byte ordering, files written using fwrite() are application-dependent, and possibly cannot be read using fread() by a different application or by the same application on a different processor. RATIONALE
None. FUTURE DIRECTIONS
None. SEE ALSO
Section 2.5, Standard I/O Streams, ferror(), fopen(), fprintf(), putc(), puts(), write() The Base Definitions volume of POSIX.1-2008, <stdio.h> COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1, 2013 Edition, Standard for Information Technol- ogy -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 7, Copyright (C) 2013 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. (This is POSIX.1-2008 with the 2013 Technical Corrigendum 1 applied.) In the event of any discrepancy between this version and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Stan- dard is the referee document. The original Standard can be obtained online at http://www.unix.org/online.html . Any typographical or formatting errors that appear in this page are most likely to have been introduced during the conversion of the source files to man page format. To report such errors, see https://www.kernel.org/doc/man-pages/reporting_bugs.html . IEEE
/The Open Group 2013 FWRITE(3P)
Check Out this Related Man Page
FREAD(3P) POSIX Programmer's Manual FREAD(3P) PROLOG
This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (consult the correspond- ing Linux manual page for details of Linux behavior), or the interface may not be implemented on Linux. NAME
fread -- binary input SYNOPSIS
#include <stdio.h> size_t fread(void *restrict ptr, size_t size, size_t nitems, FILE *restrict stream); DESCRIPTION
The functionality described on this reference page is aligned with the ISO C standard. Any conflict between the requirements described here and the ISO C standard is unintentional. This volume of POSIX.1-2008 defers to the ISO C standard. The fread() function shall read into the array pointed to by ptr up to nitems elements whose size is specified by size in bytes, from the stream pointed to by stream. For each object, size calls shall be made to the fgetc() function and the results stored, in the order read, in an array of unsigned char exactly overlaying the object. The file position indicator for the stream (if defined) shall be advanced by the number of bytes successfully read. If an error occurs, the resulting value of the file position indicator for the stream is unspeci- fied. If a partial element is read, its value is unspecified. The fread() function may mark the last data access timestamp of the file associated with stream for update. The last data access timestamp shall be marked for update by the first successful execution of fgetc(), fgets(), fread(), fscanf(), getc(), getchar(), getdelim(), get- line(), gets(), or scanf() using stream that returns data not supplied by a prior call to ungetc(). RETURN VALUE
Upon successful completion, fread() shall return the number of elements successfully read which is less than nitems only if a read error or end-of-file is encountered. If size or nitems is 0, fread() shall return 0 and the contents of the array and the state of the stream remain unchanged. Otherwise, if a read error occurs, the error indicator for the stream shall be set, and errno shall be set to indicate the error. ERRORS
Refer to fgetc(). The following sections are informative. EXAMPLES
Reading from a Stream The following example reads a single element from the fp stream into the array pointed to by buf. #include <stdio.h> ... size_t elements_read; char buf[100]; FILE *fp; ... elements_read = fread(buf, sizeof(buf), 1, fp); ... If a read error occurs, elements_read will be zero but the number of bytes read from the stream could be anything from zero to sizeof(buf)-1. The following example reads multiple single-byte elements from the fp stream into the array pointed to by buf. #include <stdio.h> ... size_t bytes_read; char buf[100]; FILE *fp; ... bytes_read = fread(buf, 1, sizeof(buf), fp); ... If a read error occurs, bytes_read will contain the number of bytes read from the stream. APPLICATION USAGE
The ferror() or feof() functions must be used to distinguish between an error condition and an end-of-file condition. Because of possible differences in element length and byte ordering, files written using fwrite() are application-dependent, and possibly cannot be read using fread() by a different application or by the same application on a different processor. RATIONALE
None. FUTURE DIRECTIONS
None. SEE ALSO
Section 2.5, Standard I/O Streams, feof(), ferror(), fgetc(), fopen(), fscanf(), getc(), gets() The Base Definitions volume of POSIX.1-2008, <stdio.h> COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1, 2013 Edition, Standard for Information Technol- ogy -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 7, Copyright (C) 2013 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. (This is POSIX.1-2008 with the 2013 Technical Corrigendum 1 applied.) In the event of any discrepancy between this version and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Stan- dard is the referee document. The original Standard can be obtained online at http://www.unix.org/online.html . Any typographical or formatting errors that appear in this page are most likely to have been introduced during the conversion of the source files to man page format. To report such errors, see https://www.kernel.org/doc/man-pages/reporting_bugs.html . IEEE
/The Open Group 2013 FREAD(3P)