vdf(8) [osf1 man page]

vdf(8)							      System Manager's Manual							    vdf(8)

NAME

       vdf - Display disk information for AdvFS domains and filesets

SYNOPSIS

       /sbin/advfs/vdf [-k] [-l] domain | domain#fileset

OPTIONS

       Display	disk  blocks as 1024-byte blocks instead of the default of 512-byte blocks.  When the -l option is specified, the default informa-
       tion for both the domain and filesets is reformatted to show the relationships between them. For example, any domain metadata displayed	is
       the total metadata shared by filesets in the domain.

OPERANDS

       The full path name of an AdvFS file domain.

	      When  a  domain  argument  is  specified,  the default display contains information about the number of disk blocks allocated to the
	      domain, the number of disk blocks in use by the domain, and the number of disk blocks that are available to the domain.  The name of
	      an AdvFS fileset in an AdvFS file domain.

	      When  a  domain#fileset argument is specified, the default display contains information about the number of disk blocks allocated to
	      the fileset, the number of disk blocks in use by the fileset, and the number of disk blocks that are available to the fileset.  This
	      information is in the same format as that displayed by the df command.

DESCRIPTION

       The  vdf utility is a script that reformats output from the showfdmn, showfsets, shfragbf, and df utilities in order to display information
       about the disk usage of AdvFS file domains and filesets. In addition, the utility computes and displays the sizes of metadata  files  in  a
       domain or fileset.

NOTES

       The disk space used by clone filesets is not calculated.

       If clone filesets are present in the specified domain, the utility displays the following warning message: Clone fileset(s) in this domain;
       totals may not be accurate

RESTRICTIONS

       You must be the root user to use this command.

       The command cannot be used on filesets that are NFS mounted.

       All filesets in a domain must be mounted in order to calculate the disk usage of the domain.

EXIT STATUS

       The utility returns a value of 0 (zero) on successful completion.  It returns a value of 1 on failure.

EXAMPLES

       The following example shows the summary information for a fileset named testfs in a domain named test.  The output is the same as  for  the
       df  command:  #	vdf  test#testfs  Filesystem	512-blocks   Used  Available Capacity  Mounted on test#testfs	    60000 20800      39200
       35%	  /mnt The following example shows the summary information for a domain named usr_domain where the number of blocks used for meta-
       data  and  data	equal  89% of the domain's capacity: # vdf usr_domain Domain	 512-blocks  Metadata	Used Available Capacity usr_domain
       65536	 11219	47549	   6768      89% The following example	shows  a  detailed  display  of  the  domain  that  contains  the  fileset
       test#testfs.   There  are  two  filesets  in the domain; each has a quota limit of 60,000 blocks: # vdf -l test#testfs Domain	512-blocks
       Metadata   Used Available Capacity test		266240	     5824  29128    231288	13%

       Fileset	QuotaLimit	 Used	 Available     Capacity  testfs 	60000	    20800	  39200 	 35%  testfs2	     60000
       8328	    51672	   14% The following example shows a detailed display of a fileset that is the only fileset in the domain and that
       the fileset has a quota limit that is greater than the domain can hold: # vdf -l test#testfs Domain    512-blocks   Metadata   Used  Avail-
       able Capacity test	   266240	5824  29128    231288	   13%

       Fileset	QuotaLimit	 Used	 Available    Capacity testfs	    300000	20800	    231288	    8%

FILES

SEE ALSO

       Commands: df(1), showfdmn(8), showfsets(8), shfragbf(8)

       Files: advfs(4)

																	    vdf(8)

Check Out this Related Man Page

rmfset(8)						      System Manager's Manual							 rmfset(8)

NAME

       rmfset - Removes a fileset or a clone fileset from an AdvFS file domain

SYNOPSIS

       /sbin/rmfset  [-f] domain fileset

OPTIONS

       Turns off the message prompt.

OPERANDS

       Specifies the name of an existing AdvFS file domain.  Specifies the name of the fileset to be removed from the specified file domain.

DESCRIPTION

       The  rmfset  command  removes  a  fileset  (and all of its files) from an existing AdvFS file domain. Unless you use the -f option, you are
       prompted with the following request before a fileset is removed: rmfset: remove fileset <filesetname>? [y/n]

       If you answer n, the fileset is not removed.  If you answer y, the fileset is removed.

       The -f option is useful for scripts or when you do not want to be queried about each fileset. If you choose the -f option, no  prompts  are
       displayed. The rmfset command operates as if you responded yes to the prompt.

       Unmount a fileset before removing it with the rmfset command.

RESTRICTIONS

       A fileset or clone fileset cannot be removed with this command if it is mounted.

       A fileset that has a clone fileset cannot be removed with this command until the clone fileset has been removed.

       You  must be the root user to use this command. An rmfset operation can hang if you attempt to remove a fileset and the target AdvFS domain
       is experiencing heavy I/O.  To work around the restriction, avoid using the utility on busy AdvFS domains.

EXAMPLES

       The following example deletes the test_fset fileset from the test_domain file domain.  In this example, the test_fset fileset is mounted on
       the /mnt3 directory: # umount /mnt3 # rmfset test_domain test_fset rmfset: remove fileset test_fset? [y/n] y #

SEE ALSO

       Commands:  mkfset(8), showfdmn(8), showfsets(8), mount(8)

       Functions:  advfs_rmfset(3)

       File Formats:  advfs(4)

																	 rmfset(8)

Linux and UNIX Man Pages

vdf(8) [osf1 man page]

Check Out this Related Man Page