Temporary(4) Kernel Interfaces Manual Temporary(4)NAME
Temporary - Stores data files during transfers to remote systems
SYNOPSIS
/usr/spool/uucp/SystemName/TM.xxPID.000
DESCRIPTION
The uucp Temporary (TM.*) files store data files during transfers to remote systems. After a Data (D.*) file is transferred to a remote
system by the uucico daemon, the uucp program places it in a subdirectory of the uucp spooling directory named /usr/spool/uucp/SystemName,
where the SystemName directory is named for the computer that is transmitting the file. The uucp program creates a temporary data file to
hold the original data file.
The full pathname of the temporary data file is in the following format: /usr/spool/uucp/SystemName/TM.xxPID.000
where the SystemName directory is named for the computer that is sending the file, and TM.xxPID.000 is the name of the file; for example,
TM.00451.000. The PID variable is the process ID of the job.
FILES
Describes accessible remote systems Contains uucp command, data, and execute files Contain data to be transferred. Contain files that uucp
has transferred
RELATED INFORMATION
Daemons: uucico(8)
Commands: uucp(1), uudemon.cleanu(4), uupick(1), uuto(1), uux(1) delim off
Temporary(4)
Check Out this Related Man Page
Log(4) Kernel Interfaces Manual Log(4)NAME
Log, .Log - Contains the uucp program log files
SYNOPSIS
/usr/spool/uucp/.Log
DESCRIPTION
The /usr/spool/uucp/.Log directories contain uucp program log files. The uucp program normally places status information about each trans-
action in the appropriate log file each time you use the networking utilities facility. All transactions of the uucico and uuxqt daemons
are logged in files named for the remote system concerned. The files are stored in a subdirectory of the /usr/spool/uucp/.Log directory
named for the daemon involved. Thus, the log files are named with a form of the following: /usr/spool/uucp/.Log/DaemonName/SystemName
The uucp and uuto commands call the uucico daemon. The uucico daemon activities for a particular remote system are logged in the System-
Name file in the /usr/spool/uucp/.Log/uucico directory on the local system.
The uux and uusend commands call the uuxqt daemon. The uuxqt daemon activities for a particular remote system are logged in the SystemName
file in the /usr/spool/uucp/.Log/uuxqt directory on the local system.
When more than one uucp process is running, however, the system cannot access the standard log file, so it places the status information in
a file with a .Log prefix that covers just the single transaction.
The uucp program can automatically append the temporary log files to a primary log file. This is called compacting the log files, and is
handled by the uudemon.cleanu command, a shell procedure, which combines the log files of the activities of the uucico and uuxqt daemons on
a system and stores them in the /usr/spool/uucp/.Old directory.
The default is for the uudemon.cleanu command to save log files that are 2 days old. This default can be changed by modifying the appro-
priate line in the shell script. If storage space is a problem on a particular system, reduce the number of days that the files are kept
in the individual log files.
The uulog command can be used to view the uucp program log files.
RELATED INFORMATION
Daemons: cron, uucico(8), uusched(8)
Commands: uucp(1), uudemon.cleanu(4), uulog(1), uusend(1), uuto(1), uux(1) delim off
Log(4)
Hi!
I'm trying to sort a file.dat with the sort command. The data contained by file.dat is similar to the data set below:
100.000
99.000
110.000
55.000
113.000
33.000
25.000
9.000
15.000
It is relatively easy to sort the data in ascending or descending order, but the problem is... (11 Replies)
It is required to trap the signal send to a daemon process before rebooting a unix server. Suppose a script abc.ksh is running in the server as daemon. Before rebooting the server, the unix admin kills all the daemon processes. It is not known to me how admin kills the processes; I mean by which... (9 Replies)
Hi,
I got a lot of files looking like this:
1
0.5
6
All together there are ard 1'000'000 lines in each of the ard 100 files.
I want to build the average for every line, and write the result to a new file.
The averaging should start at a specific line, here for example at line... (10 Replies)
I have a very large file (10,000,000 lines), that contains a sample id and a property of that sample. I have another file that contains around 1,000,000 lines with sample ids that I want to remove from the original file (create a new file without these lines).
I know how to do this in Perl, but it... (9 Replies)
Hi all,
is there a way to list all files with 000 permission and not get "Permission denied" message?
I would like to have names of all those files in one text file.
At the moment, i have this " find . -type d \( -name . -o -prune \) -perm 000 > text.txt " and it is not working.
Can... (8 Replies)
I want to write a Perl script that manipulates multiple files. In the directory, I have files 250.*chr$.ped where * is from 1 to 1000 and $ is from 1-22 for a total of 22 x 10,000 = 22,000 files.
I want to write a script that only manipulates files 250.1chr*.ped where * is from 1 to 22.... (10 Replies)
Hi,
I want to count the number of occurrences of numbers from a file of 6,000,000 lines. Because its too large, I decided to split the counts up in multiple files. So I have files of the counts of 5,000 lines. Now I want to add up the counts of all those files.
The "counts file" looks like... (9 Replies)
Hello all,
I'm in the process of writing a script, and I need to be able to add columns of time in the following format (time elapsed Net Backup logs):
000:01:03
000:00:58
000:00:49
Does anyone have a way of converting and/or adding timestamps such as these accurately?
Thanks in... (9 Replies)
The dataset I'm working on is about 450G, with about 7000 colums and 30,000,000 rows.
I want to extract about 2000 columns from the original file to form a new file.
I have the list of number of the columns I need, but don't know how to extract them.
Thanks! (14 Replies)
How would someone save a file such as /etc/vpnc/test.conf locally into a temp file, so it can be queried? So for example if I used rsync to copy this file locally, how would I add that to a temp_file variable and discard it using unlink?
#include <stdio.h>
#include "error.h"
... (15 Replies)
My OS is Windows 10 and I am using Cygwin.
The file 1 content is:
USE solution 2; -4.000
USE solution 3; -4.000
…
USE solution 29; -4.000
USE solution 30; -4.000
USE solution 31; -4.000
….
USE solution 89; -4.000
...
USE solution 202; -4.000
etc...
I need to replace... (8 Replies)