MR(1) mr MR(1)
NAME
mr - a Multiple Repository management tool
SYNOPSIS
mr [options] checkout
mr [options] update
mr [options] status
mr [options] commit [-m "message"]
mr [options] record [-m "message"]
mr [options] push
mr [options] diff
mr [options] log
mr [options] run command [param ...]
mr [options] bootstrap url [directory]
mr [options] register [repository]
mr [options] config section ["parameter=[value]" ...]
mr [options] action [params ...]
mr [options] [online|offline]
mr [options] remember action [params ...]
DESCRIPTION
mr is a Multiple Repository management tool. It can checkout, update, or perform other actions on a set of repositories as if they were one
combined repository. It supports any combination of subversion, git, cvs, mercurial, bzr, darcs, fossil and veracity repositories, and
support for other version control systems can easily be added.
mr cds into and operates on all registered repositories at or below your working directory. Or, if you are in a subdirectory of a
repository that contains no other registered repositories, it will stay in that directory, and work on only that repository,
mr is configured by .mrconfig files, which list the repositories. It starts by reading the .mrconfig file in your home directory, and this
can in turn chain load .mrconfig files from repositories. It also automatically looks for a .mrconfig file in the current directory, or in
one of its parent directories.
These predefined commands should be fairly familiar to users of any version control system:
checkout (or co)
Checks out any repositories that are not already checked out.
update
Updates each repository from its configured remote repository.
If a repository isn't checked out yet, it will first check it out.
status
Displays a status report for each repository, showing what uncommitted changes are present in the repository.
commit (or ci)
Commits changes to each repository. (By default, changes are pushed to the remote repository too, when using distributed systems like
git. If you don't like this default, you can change it in your .mrconfig, or use record instead.)
The optional -m parameter allows specifying a commit message.
record
Records changes to the local repository, but does not push them to the remote repository. Only supported for distributed version
control systems.
The optional -m parameter allows specifying a commit message.
push
Pushes committed local changes to the remote repository. A no-op for centralized version control systems.
diff
Show a diff of uncommitted changes.
log Show the commit log.
run command [param ...]
Runs the specified command in each repository.
These commands are also available:
bootstrap url [directory]
Causes mr to download the url, and use it as a .mrconfig file to checkout the repositories listed in it, into the specified directory.
The directory will be created if it does not exist. If no directory is specified, the current directory will be used.
If the .mrconfig file includes a repository named ".", that is checked out into the top of the specified directory.
list (or ls)
List the repositories that mr will act on.
register
Register an existing repository in a mrconfig file. By default, the repository in the current directory is registered, or you can
specify a directory to register.
The mrconfig file that is modified is chosen by either the -c option, or by looking for the closest known one at or in a parent of the
current directory.
config
Adds, modifies, removes, or prints a value from a mrconfig file. The next parameter is the name of the section the value is in. To add
or modify values, use one or more instances of "parameter=value". Use "parameter=" to remove a parameter. Use just "parameter" to get
the value of a parameter.
For example, to add (or edit) a repository in src/foo:
mr config src/foo checkout="svn co svn://example.com/foo/trunk foo"
To show the command that mr uses to update the repository in src/foo:
mr config src/foo update
To see the built-in library of shell functions contained in mr:
mr config DEFAULT lib
The mrconfig file that is used is chosen by either the -c option, or by looking for the closest known one at or in a parent of the
current directory.
offline
Advises mr that it is in offline mode. Any commands that fail in offline mode will be remembered, and retried when mr is told it's
online.
online
Advices mr that it is in online mode again. Commands that failed while in offline mode will be re-run.
remember
Remember a command, to be run later when mr re-enters online mode. This implicitly puts mr into offline mode. The command can be any
regular mr command. This is useful when you know that a command will fail due to being offline, and so don't want to run it right now
at all, but just remember to run it when you go back online.
help
Displays this help.
Actions can be abbreviated to any unambiguous substring, so "mr st" is equivalent to "mr status", and "mr up" is equivalent to "mr update"
Additional parameters can be passed to most commands, and are passed on unchanged to the underlying version control system. This is mostly
useful if the repositories mr will act on all use the same version control system.
OPTIONS
-d directory
--directory directory
Specifies the topmost directory that mr should work in. The default is the current working directory.
-c mrconfig
--config mrconfig
Use the specified mrconfig file. The default is to use both ~/.mrconfig as well as look for a .mrconfig file in the current directory,
or in one of its parent directories.
-f
--force
Force mr to act on repositories that would normally be skipped due to their configuration.
-v
--verbose
Be verbose.
-q
--quiet
Be quiet. This suppresses mr's usual output, as well as any output from commands that are run (including stderr output). If a command
fails, the output will be shown.
-k
--insecure
Accept untrusted SSL certificates when bootstrapping.
-s
--stats
Expand the statistics line displayed at the end to include information about exactly which repositories failed and were skipped, if
any.
-i
--interactive
Interactive mode. If a repository fails to be processed, a subshell will be started which you can use to resolve or investigate the
problem. Exit the subshell to continue the mr run.
-n [number]
--no-recurse [number]
If no number if specified, just operate on the repository for the current directory, do not recurse into deeper repositories.
If a number is specified, will recurse into repositories at most that many subdirectories deep. For example, with -n 2 it would recurse
into ./src/foo, but not ./src/packages/bar.
-j [number]
--jobs [number]
Run the specified number of jobs in parallel, or an unlimited number of jobs with no number specified. This can greatly speed up
operations such as updates. It is not recommended for interactive operations.
Note that running more than 10 jobs at a time is likely to run afoul of ssh connection limits. Running between 3 and 5 jobs at a time
will yield a good speedup in updates without loading the machine too much.
-t
--trust-all
Trust all mrconfig files even if they are not listed in ~/.mrtrust. Use with caution.
-p
--path
This obsolete flag is ignored.
MRCONFIG FILES
Here is an example .mrconfig file:
[src]
checkout = svn checkout svn://svn.example.com/src/trunk src
chain = true
[src/linux-2.6]
checkout = git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git &&
cd linux-2.6 &&
git checkout -b mybranch origin/master
The .mrconfig file uses a variant of the INI file format. Lines starting with "#" are comments. Values can be continued to the following
line by indenting the line with whitespace.
The "DEFAULT" section allows setting default values for the sections that come after it.
The "ALIAS" section allows adding aliases for actions. Each parameter is an alias, and its value is the action to use.
All other sections add repositories. The section header specifies the directory where the repository is located. This is relative to the
directory that contains the mrconfig file, but you can also choose to use absolute paths. (Note that you can use environment variables in
section names; they will be passed through the shell for expansion. For example, "[$HOSTNAME]", or "[${HOSTNAME}foo]").
Within a section, each parameter defines a shell command to run to handle a given action. mr contains default handlers for "update",
"status", "commit", and other standard actions.
Normally you only need to specify what to do for "checkout". Here you specify the command to run in order to create a checkout of the
repository. The command will be run in the parent directory, and must create the repository's directory. So use "git clone", "svn
checkout", "bzr branch" or "bzr checkout" (for a bound branch), etc.
Note that these shell commands are run in a "set -e" shell environment, where any additional parameters you pass are available in $@. All
commands other than "checkout" are run inside the repository, though not necessarily at the top of it.
The "MR_REPO" environment variable is set to the path to the top of the repository. (For the "register" action, "MR_REPO" is instead set to
the basename of the directory that should be created when checking the repository out.)
The "MR_CONFIG" environment variable is set to the .mrconfig file that defines the repo being acted on, or, if the repo is not yet in a
config file, the .mrconfig file that should be modified to register the repo.
The "MR_ACTION" environment variable is set to the command being run (update, checkout, etc).
A few parameters have special meanings:
skip
If the "skip" parameter is set and its command returns true, then mr will skip acting on that repository. The command is passed the
action name in $1.
Here are two examples. The first skips the repo unless mr is run by joey. The second uses the hours_since function (included in mr's
built-in library) to skip updating the repo unless it's been at least 12 hours since the last update.
[mystuff]
checkout = ...
skip = test `whoami` != joey
[linux]
checkout = ...
skip = [ "$1" = update ] && ! hours_since "$1" 12
Another way to use skip is for a lazy checkout. This makes mr skip operating on a repo unless it already exists. To enable the repo,
you have to explicitly check it out (using "mr --force -d foo checkout").
[foo]
checkout = ...
skip = lazy
order
The "order" parameter can be used to override the default ordering of repositories. The default order value is 10. Use smaller values
to make repositories be processed earlier, and larger values to make repositories be processed later.
Note that if a repository is located in a subdirectory of another repository, ordering it to be processed earlier is not recommended.
chain
If the "chain" parameter is set and its command returns true, then mr will try to load a .mrconfig file from the root of the
repository.
include
If the "include" parameter is set, its command is ran, and should output additional mrconfig file content. The content is included as
if it were part of the including file.
Unlike all other parameters, this parameter does not need to be placed within a section.
mr ships several libraries that can be included to add support for additional version control type things (unison, git-svn, git-fake-
bare, git-subtree). To include them all, you could use:
include = cat /usr/share/mr/*
See the individual files for details.
deleted
If the "deleted" parameter is set and its command returns true, then mr will treat the repository as deleted. It won't ever actually
delete the repository, but it will warn if it sees the repository's directory. This is useful when one mrconfig file is shared among
multiple machines, to keep track of and remember to delete old repositories.
lib The "lib" parameter can specify some shell code that will be run before each command, this can be a useful way to define shell
functions for other commands to use.
Unlike most other parameters, this can be specified multiple times, in which case the chunks of shell code are accumulatively
concatenated together.
fixups
If the "fixups" parameter is set, its command is run whenever a repository is checked out, or updated. This provides an easy way to do
things like permissions fixups, or other tweaks to the repository content, whenever the repository is changed.
VCS_action
When looking for a command to run for a given action, mr first looks for a parameter with the same name as the action. If that is not
found, it looks for a parameter named "VCS_action" (substituting in the name of the version control system and the action).
Internally, mr has settings for "git_update", "svn_update", etc. To change the action that is performed for a given version control
system, you can override these VCS specific actions. To add a new version control system, you can just add VCS specific actions for it.
pre_ and post_
If a "pre_action" parameter is set, its command is run before mr performs the specified action. Similarly, "post_action" parameters are
run after mr successfully performs the specified action. For example, "pre_commit" is run before committing; "post_update" is run after
updating.
_append
Any parameter can be suffixed with "_append", to add an additional value to the existing value of the parameter. In this way, actions
can be constructed accumulatively.
VCS_test
The name of the version control system is itself determined by running each defined "VCS_test" action, until one succeeds.
UNTRUSTED MRCONFIG FILES
Since mrconfig files can contain arbitrary shell commands, they can do anything. This flexibility is good, but it also allows a malicious
mrconfig file to delete your whole home directory. Such a file might be contained inside a repository that your main ~/.mrconfig checks
out. To avoid worries about evil commands in a mrconfig file, mr defaults to reading all mrconfig files other than the main ~/.mrconfig in
untrusted mode. In untrusted mode, mrconfig files are limited to running only known safe commands (like "git clone") in a carefully checked
manner.
To configure mr to trust other mrconfig files, list them in ~/.mrtrust. One mrconfig file should be listed per line. Either the full
pathname should be listed, or the pathname can start with ~/ to specify a file relative to your home directory.
OFFLINE LOG FILE
The ~/.mrlog file contains commands that mr has remembered to run later, due to being offline. You can delete or edit this file to remove
commands, or even to add other commands for 'mr online' to run. If the file is present, mr assumes it is in offline mode.
EXTENSIONS
mr can be extended to support things such as unison and git-svn. Some files providing such extensions are available in /usr/share/mr/. See
the documentation in the files for details about using them.
EXIT STATUS
mr returns nonzero if a command failed in any of the repositories.
AUTHOR
Copyright 2007-2011 Joey Hess <joey@kitenet.net>
Licensed under the GNU GPL version 2 or higher.
http://kitenet.net/~joey/code/mr/
perl v5.14.2 2012-05-14 MR(1)