Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

usb_if_descr(9s) [opensolaris man page]

usb_if_descr(9S)					    Data Structures for Drivers 					  usb_if_descr(9S)

NAME
usb_if_descr - USB interface descriptor SYNOPSIS
#include <sys/usb/usba.h> INTERFACE LEVEL
Solaris DDI specific (Solaris DDI) DESCRIPTION
The usb_if_descr_t interface descriptor defines attributes of an interface. A configuration contains one or more interfaces. An interface contains one or more endpoints. Please refer to Section 9.6.5 of the USB 2.0 specification. The USB 2.0 specification is available at www.usb.org. One or more configuration descriptors are retrieved from a USB device during device enumeration. They can be accessed via usb_get_dev_data(9F). A interface descriptor has the following fields: uint8_t bLength Size of this descriptor in bytes. uint8_t bDescriptorType Set to USB_DESCR_TYPE_IF. uint8_t bInterfaceNumber Interface number (0-based). uint8_t bAlternateSetting Alternate setting number for this interface and its endpoints (0-based). uint8_t bNumEndpoints Number of endpoints, excluding endpoint 0. uint8_t bInterfaceClass Interface Class code (see below). uint8_t bInterfaceSubClass Sub class code. (See USB 2.0 specification of applicable interface class for information.) uint8_t bInterfaceProtocol Protocol code. (See USB 2.0 specification of applicable interface class for information.) uint8_t iInterface Index of optional string describing this interface Valid if > 0. Pass to usb_get_string_descr(9F) to retrieve string. USB 2.0 specification interface descriptor bInterfaceClass field values are as follows: USB_CLASS_APP Application-specific interface class USB_CLASS_AUDIO Audio interface class USB_CLASS_CCID Chip/Smartcard interface class USB_CLASS_CDC_CTRL CDC control interface class USB_CLASS_CDC_DATA CDC data interface class USB_CLASS_SECURITY Content security interface class USB_CLASS_DIAG Diagnostic interface class USB_CLASS_HID HID interface class USB_CLASS_HUB HUB interface class USB_CLASS_MASS_STORAGE Mass storage interface class USB_CLASS_PHYSICAL Physical interface class USB_CLASS_PRINTER Printer interface class USB_CLASS_VENDOR_SPEC Vendor-specific interface class USB_CLASS_WIRELESS Wireless interface class ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |PCI-based systems | +-----------------------------+-----------------------------+ |Interface stability |Committed | +-----------------------------+-----------------------------+ |Availability |SUNWusbu | +-----------------------------+-----------------------------+ SEE ALSO
attributes(5), usb_get_alt_if(9F), usb_get_cfg(9F), usb_get_dev_data(9F), usb_get_string_descr(9F), usb_parse_data(9F), usb_cfg_descr(9S), usb_ctrl_request(9S), usb_dev_descr(9S), usb_dev_qlf_descr(9S), usb_ep_descr(9S), usb_other_speed_cfg_descr(9S), usb_string_descr(9S) SunOS 5.11 5 Jan 2004 usb_if_descr(9S)

Check Out this Related Man Page

usb_dev_descr(9S)					    Data Structures for Drivers 					 usb_dev_descr(9S)

NAME
usb_dev_descr - USB device descriptor SYNOPSIS
#include <sys/usb/usba.h> INTERFACE LEVEL
Solaris DDI specific (Solaris DDI) DESCRIPTION
The usb_dev_descr_t device descriptor defines device-wide attributes. Please refer to Section 9.6.1 of the USB 2.0 specification. The USB 2.0 specification is available at www.usb.org. The device descriptor is retrieved from a USB device during device enumeration and can be accessed via usb_get_dev_data(9F). A device descriptor contains the following fields: uint8_t bLength Size of this descriptor, in bytes. uint8_t bDescriptorType Set to USB_DESCR_TYPE_DEV. uint16_t bcdUSB USB specification release number supported, in bcd. uint8_t bDeviceClass Class code (see below). uint8_t bDeviceSubClass Subclass code (see USB 2.0 specification of applicable device class for information.) uint8_t bDeviceProtocol Protocol code (see USB 2.0 specification of applicable device class for information.) uint8_t bMaxPacketSize0 Maximum packet size of endpoint 0. uint16_t idVendor vendor ID value. uint16_t idProduct product ID value. uint16_t bcdDevice Device release number in binary coded decimal. uint8_t iManufacturer Index of optional manufacturer description string. Valid if > 0. uint8_t iProduct Index of optional product description string. Valid if > 0. uint8_t iSerialNumber Index of optional serial number string. Valid if > 0. uint8_t bNumConfigurations Number of available configurations. Device descriptors bDeviceClass values: USB_CLASS_PER_INTERFACE Class information is at interface level. USB_CLASS_COMM CDC control device class. USB_CLASS_DIAG Diagnostic device class. USB_CLASS_HUB HUB device class. USB_CLASS_MISC MISC device class. USB_CLASS_VENDOR_SPEC Vendor-specific class. USB_CLASS_WIRELESS Wireless controller device class. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |PCI-based systems | +-----------------------------+-----------------------------+ |Interface stability |Committed | +-----------------------------+-----------------------------+ |Availability |SUNWusbu | +-----------------------------+-----------------------------+ SEE ALSO
attributes(5), usb_get_alt_if(9F), usb_get_cfg(9F), usb_get_dev_data(9F), usb_get_string_descr(9F), usb_parse_data(9F), usb_cfg_descr(9S), usb_ctrl_request(9S), usb_dev_qlf_descr(9S), usb_ep_descr(9S), usb_if_descr(9S), usb_other_speed_cfg_descr(9S), usb_string_descr(9S) SunOS 5.11 5 Jan 2004 usb_dev_descr(9S)
Man Page