cups-snmp.conf(5) [mojave man page]

snmp.conf(5)							    Apple Inc.							      snmp.conf(5)

NAME

       snmp.conf - snmp configuration file for cups

DESCRIPTION

       The  snmp.conf file configures how the standard CUPS network backends (http, https, ipp, ipps, lpd, snmp, and socket) access printer infor-
       mation using SNMPv1 and is normally located in the /etc/cups directory.	Each line in the file can be a configuration  directive,  a  blank
       line, or a comment. Comment lines start with the # character.

       The Community and DebugLevel directives are used by all backends. The remainder apply only to the SNMP backend - cups-snmp(8).

DIRECTIVES

       The following directives are understood by the CUPS network backends:

       Address @IF(name)

       Address @LOCAL

       Address address
	    Sends SNMP broadcast queries (for discovery) to the specified address(es).	There is no default for the broadcast address.

       Community name
	    Specifies the community name to use.  Only a single community name may be specified.  The default community name is "public".

       DebugLevel number
	    Specifies  the  logging  level from 0 (none) to 3 (everything).  Typically only used for debugging (thus the name).  The default debug
	    level is 0.

       DeviceURI "regular expression" device-uri [... device-uri]
	    Specifies one or more device URIs that should be used for a given make and model string.  The regular expression is used to match  the
	    detected  make  and  model,  and  the  device  URI	strings must be of the form "scheme://%s[:port]/[path]", where "%s" represents the
	    detected address or hostname.  There are no default device URI matching rules.

       HostNameLookups on

       HostNameLookups off
	    Specifies whether the addresses of printers should be converted to hostnames or left as numeric IP addresses.  The default is "off".

       MaxRunTime seconds
	    Specifies the maximum number of seconds that the SNMP backend will scan the network for printers.  The default is 120 seconds (2  min-
	    utes).

SEE ALSO

       cups-snmp(8), CUPS Online Help (http://localhost:631/help)

COPYRIGHT

       Copyright (C) 2007-2017 by Apple Inc.

10 June 2014							       CUPS							      snmp.conf(5)

cups-browsed.conf(5)													      cups-browsed.conf(5)

NAME

       cups-browsed.conf - server configuration file for cups-browsed

DESCRIPTION

       The cups-browsed.conf file configures the cups-browsed daemon. It is normally located in the /etc/cups directory. Each line in the file can
       be a configuration directive, a blank line, or a comment. Comment lines start with the # character.

DIRECTIVES

       The BrowseAllow directive specifies a system or network to accept CUPS browse packets from. The default is to accept  browse  packets  from
       all hosts when BrowseRemoteProtocols uses the CUPS protocol.

	       BrowseAllow 192.168.7.20
	       BrowseAllow 192.168.7.0/24
	       BrowseAllow 192.168.7.0/255.255.255.0

       The  BrowsePoll	directive  polls a server for available printers once every 60 seconds. Multiple BrowsePoll directives can be specified to
       poll multiple servers. The default port to connect to is 631.  BrowsePoll works independently of whether  CUPS  browsing  is  activated	in
       BrowseRemoteProtocols.

	       BrowsePoll 192.168.7.20
	       BrowsePoll 192.168.7.65:631
	       BrowsePoll host.example.com:631

       The  BrowseLocalProtocols  directive  specifies	the protocols to use when advertising local shared printers on the network. The default is
       "none". Control of advertising of local shared printers using dnssd is done in /etc/cups/cupsd.conf.

	       BrowseLocalProtocols none
	       BrowseLocalProtocols CUPS

       The BrowseRemoteProtocols directive specifies the protocols to use when finding remote shared printers on the network.  Multiple  protocols
       can be specified by separating them with spaces.  The default is "dnssd cups".

	       BrowseRemoteProtocols none
	       BrowseRemoteProtocols CUPS dnssd
	       BrowseRemoteProtocols CUPS
	       BrowseRemoteProtocols dnssd

       The  BrowseProtocols  directive	specifies  the	protocols  to use when finding remote shared printers on the network and advertising local
       shared printers. "dnssd" is ignored for BrowseLocalProtocols. Multiple protocols can be specified  by  separating  them	with  spaces.  The
       default is "none" for BrowseLocalProtocols and "dnssd cups" for BrowseRemoteProtocols.

	       BrowseProtocols none
	       BrowseProtocols CUPS dnssd
	       BrowseProtocols CUPS
	       BrowseProtocols dnssd

SEE ALSO

       cups-browsed(8)

       /usr/share/doc/cups-filters/README

AUTHOR

       The authors of cups-browsed are listed in /usr/share/doc/cups-filters/AUTHORS.

       This manual page was written for the Debian Project, but it may be used by others.

								   29 June 2013 					      cups-browsed.conf(5)