Login or Register to Ask a Question and Join Our Community

Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

libcadmin(1m) [hpux man page]

libcadmin(1M)															     libcadmin(1M)

NAME

       libcadmin - libc administration command

SYNOPSIS

       /usr/sbin/libcadmin

DESCRIPTION

       The  command is used to perform administrative functions for Currently the only function that the command performs is to replace the shared
       32-bit PA-RISC2.0 library in with the shared 32-bit PA-RISC1.1 version of that library.

       There are no required arguments or options used with this command.  The archive library and the symbolic link are unaffected  by  the  com-
       mand.

       During  the  system  installation  process,  the shared 32-bit PA-RISC1.1 library is copied into This library is the same as the PA-RISC2.0
       library except that it was built with different compiler options.  The PA-RISC2.0 library provides much higher  performance  than  the  PA-
       RISC1.1 library.  However, if the system administrator desires to have the PA-RISC1.1 library installed instead, allows the system adminis-
       trator to accomplish this task.	When is executed, the PA-RISC2.0 library is stored in and the PA-RISC1.1 library is copied into

       It is recommended that the system be re-booted after executing the command so that applications which are linked shared	against  will  use
       the shared 32-bit PA-RISC1.1 version of that library.

       Once the command is executed, the only way to put the PA-RISC2.0 library back in place is to re-install the operating system.

       The command can only be executed by a user with superuser privileges.

DIAGNOSTICS

       Multiple executions of the command will result in an error message indicating the PA-RISC1.1 library is already installed.

       Executing this command on a PA-RISC1.1 machine will result in an error message indicating the PA-RISC1.1 library is already installed.

RETURN VALUE

       Upon successful completion, returns zero(0).  Otherwise a one(1) is returned.

WARNINGS

       Since HP stopped shipping the PA1.1 version of beginning with HP-UX 11i Version 2, this command is currently nonfunctional.  is planned for
       obsolescence at a future release.

AUTHOR

       was developed by HP.

								  TO BE OBSOLETED						     libcadmin(1M)

Check Out this Related Man Page

st(1M)																	    st(1M)

NAME

       st - shared tape administration

SYNOPSIS

       device_file

DESCRIPTION

       The  command  provides  users  with a command-line interface to check the status of a shared tape device or to reclaim a shared tape device
       from a host system that has failed while holding a reservation on the shared tape device.  The command can also be used for the	same  pur-
       pose on shared library robotic devices.	To use the command you must have root user id.

       Please see examples below for usage.

   Options
       recognizes the following options and arguments:

       Specifies the tape device file or sctl/esctl pass-through device
		      file for the shared tape/library device. This parameter is mandatory and will report an error if device_file is omitted.

       Allows the user to reclaim a shared tape device or shared
		      library robotic device in the case where a host failed while holding a reservation on the shared device.	This option causes
		      a bus device reset to be issued to the device specified by the option.

       Prints out the current status of the shared tape/library
		      device specified by the option.

RETURN VALUE

       returns 0 upon successful completion and 1 otherwise.

EXAMPLES

       The following shows three examples of output from the above command.

       The above output indicates that the shared device is reserved by another host and is therefore unavailable at this time.

       The above output indicates that the shared device is not ready for use at this time.

       The above output indicates that the shared device is ready for use at this time.

       To reclaim a shared tape/library device from a failed host, the following command can be used:

WARNINGS

       The option must be used with care. When reclaiming devices, it must be ensured that the host from which the device is being  reclaimed  has
       in fact failed, as data may be lost as the result of reclaiming a device that is currently in use by another host.

AUTHOR

       was developed by Hewlett-Packard.

SEE ALSO

       mt(1), scsi(7), scsi_ctl(7).

																	    st(1M)
Man Page