racoon(8) [debian man page]

RACOON(8)						    BSD System Manager's Manual 						 RACOON(8)

NAME

     racoon -- IKE (ISAKMP/Oakley) key management daemon

SYNOPSIS

     racoon [-46BdFLVv] [-f configfile] [-l logfile] [-P isakmp-natt-port] [-p isakmp-port]

DESCRIPTION

     racoon speaks the IKE (ISAKMP/Oakley) key management protocol, to establish security associations with other hosts.  The SPD (Security Policy
     Database) in the kernel usually triggers racoon.  racoon usually sends all informational messages, warnings and error messages to syslogd(8)
     with the facility LOG_DAEMON and the priority LOG_INFO.  Debugging messages are sent with the priority LOG_DEBUG.	You should configure
     syslog.conf(5) appropriately to see these messages.

     -4

     -6      Specify the default address family for the sockets.

     -B      Install SA(s) from the file which is specified in racoon.conf(5).

     -d      Increase the debug level.	Multiple -d arguments will increase the debug level even more.

     -F      Run racoon in the foreground.

     -f configfile
	     Use configfile as the configuration file instead of the default.

     -L      Include file_name:line_number:function_name in all messages.

     -l logfile
	     Use logfile as the logging file instead of syslogd(8).

     -P isakmp-natt-port
	     Use isakmp-natt-port for NAT-Traversal port-floating.  The default is 4500.

     -p isakmp-port
	     Listen to the ISAKMP key exchange on port isakmp-port instead of the default port number, 500.

     -V      Print racoon version and compilation options and exit.

     -v      This flag causes the packet dump be more verbose, with higher debugging level.

     racoon assumes the presence of the kernel random number device rnd(4) at /dev/urandom.

RETURN VALUES

     The command exits with 0 on success, and non-zero on errors.

FILES

     /etc/racoon.conf  default configuration file.

SEE ALSO

     ipsec(4), racoon.conf(5), syslog.conf(5), setkey(8), syslogd(8)

HISTORY

     The racoon command first appeared in the ``YIPS'' Yokogawa IPsec implementation.

SECURITY CONSIDERATIONS

     The use of IKE phase 1 aggressive mode is not recommended, as described in http://www.kb.cert.org/vuls/id/886601.

BSD
								 January 23, 2009							       BSD

RACOONCTL(8)						    BSD System Manager's Manual 					      RACOONCTL(8)

NAME

     racoonctl -- racoon administrative control tool

SYNOPSIS

     racoonctl reload-config
     racoonctl show-schedule
     racoonctl [-l [-l]] show-sa [isakmp|esp|ah|ipsec]
     racoonctl flush-sa [isakmp|esp|ah|ipsec]
     racoonctl delete-sa saopts
     racoonctl establish-sa [-u identity] saopts
     racoonctl vpn-connect [-u -identity] vpn_gateway
     racoonctl vpn-disconnect vpn_gateway
     racoonctl show-event [-l]
     racoonctl logout-user login

DESCRIPTION

     racoonctl is used to control racoon(8) operation, if ipsec-tools was configured with adminport support.  Communication between racoonctl and
     racoon(8) is done through a UNIX socket.  By changing the default mode and ownership of the socket, you can allow non-root users to alter
     racoon(8) behavior, so do that with caution.

     The following commands are available:

     reload-config
	     This should cause racoon(8) to reload its configuration file.

     show-schedule
	     Unknown command.

     show-sa [isakmp|esp|ah|ipsec]
	     Dump the SA: All the SAs if no SA class is provided, or either ISAKMP SAs, IPsec ESP SAs, IPsec AH SAs, or all IPsec SAs.	Use -l to
	     increase verbosity.

     flush-sa [isakmp|esp|ah|ipsec]
	     is used to flush all SAs if no SA class is provided, or a class of SAs, either ISAKMP SAs, IPsec ESP SAs, IPsec AH SAs, or all IPsec
	     SAs.

     establish-sa [-u username] saopts
	     Establish an SA, either an ISAKMP SA, IPsec ESP SA, or IPsec AH SA.  The optional -u username can be used when establishing an ISAKMP
	     SA while hybrid auth is in use.  racoonctl will prompt you for the password associated with username and these credentials will be
	     used in the Xauth exchange.

	     saopts has the following format:

	     isakmp {inet|inet6} src dst

	     {esp|ah} {inet|inet6} src/prefixlen/port dst/prefixlen/port
	       {icmp|tcp|udp|any}

     vpn-connect [-u username] vpn_gateway
	     This is a particular case of the previous command.  It will establish an ISAKMP SA with vpn_gateway.

     delete-sa saopts
	     Delete an SA, either an ISAKMP SA, IPsec ESP SA, or IPsec AH SA.

     vpn-disconnect vpn_gateway
	     This is a particular case of the previous command.  It will kill all SAs associated with vpn_gateway.

     show-event [-l]
	     Dump all events reported by racoon(8), then quit.	The -l flag causes racoonctl to not stop once all the events have been read, but
	     rather to loop awaiting and reporting new events.

     logout-user login
	     Delete all SA established on behalf of the Xauth user login.

     Command shortcuts are available:
	   rc	reload-config
	   ss	show-sa
	   sc	show-schedule
	   fs	flush-sa
	   ds	delete-sa
	   es	establish-sa
	   vc	vpn-connect
	   vd	vpn-disconnect
	   se	show-event
	   lu	logout-user

RETURN VALUES

     The command should exit with 0 on success, and non-zero on errors.

FILES

     /var/racoon/racoon.sock or
     /var/run/racoon.sock	     racoon(8) control socket.

SEE ALSO

     ipsec(4), racoon(8)

HISTORY

     Once was kmpstat in the KAME project.  It turned into racoonctl but remained undocumented for a while.  Emmanuel Dreyfus <manu@NetBSD.org>
     wrote this man page.

BSD
								 November 16, 2004							       BSD