PORTSENTRY(8) System Manager's Manual PORTSENTRY(8)
NAME
portsentry - detect portscan activity
SYNOPSIS
portsentry [ -tcp | -stcp | -atcp ]
portsentry [ -udp | -sudp | -audp ]
DESCRIPTION
This manual page documents briefly the portsentry command. This manual page was written for the Debian GNU/Linux distribution because the
original program does not have a manual page.
portsentry is a program that tries to detect portscans on network interfaces with the ability to detect stealth scans. On alarm portsentry
can block the scanning machine via hosts.deny (see hosts_access(5), firewall rule (see ipfwadm(8), ipchains(8) and iptables(8)) or dropped
route (see route(8)).
OPTIONS
For details on the various modes see /usr/share/doc/portsentry/README.install
-tcp tcp portscan detection on ports specified under TCP_PORTS in the config file /etc/portsentry/portsentry.conf.
-stcp As above but additionally detect stealth scans.
-atcp Advanced tcp or inverse mode. Portsentry binds to all unused ports below ADVANCED_PORTS_TCP given in the config file /etc/portsen-
try/portsentry.conf.
-udp udp portscan detection on ports specified under UDP_PORTS in the config file /etc/portsentry/portsentry.conf.
-sudp As above but additionally detect "stealth" scans.
-audp Advanced udp or inverse mode. Portsentry binds to all unused ports below ADVANCED_PORTS_UDP given in the config file /etc/portsen-
try/portsentry.conf.
CONFIGURATION FILES
portsentry keeps all its configuration files in /etc/portsentry. portsentry.conf is portsentry's main configuration file. See portsen-
try.conf(5) for details.
The file portsentry.ignore contains a list of all hosts that are ignored, if they connect to a tripwired port. It should contain at least
the localhost(127.0.0.1), 0.0.0.0 and the IP addresses of all local interfaces. You can ignore whole subnets by using a notation <IP
Address>/<Netmask Bits>. It is *not* recommend putting in every machine IP on your network. It may be important for you to see who is con-
necting to you, even if it is a "friendly" machine. This can help you detect internal host compromises faster.
If you use the /etc/init.d/portsentry script to start the daemon, portsentry.ignore is rebuild on each start of the daemon using portsen-
try.ignore.static and all the IP addresses found on the machine via ifconfig.
/etc/default/portsentry specifies in which protocol modes portsentry should be startet from /etc/init.d/portsentry There are currently two
options:
TCP_MODE=
either tcp, stcp or atcp (see OPTIONS above).
UDP_MODE=
either udp, sudp or audp (see OPTIONS above).
The options above correspond to portsentry's commandline arguments. For example TCP_MODE="atcp" has the same effect as to start portsentry
using portsentry -atcp. Only one mode per protocol can be started at a time (i.e. one tcp and one udp mode).
FILES
/etc/portsentry/portsentry.conf main configuration file
/etc/portsentry/portsentry.ignore
IP addresses to ignore
/etc/portsentry/portsentry.ignore.static
static IP addresses to ignore
/etc/default/portsentry
startup options
/etc/init.d/portsentry
script responsible for starting and stopping the daemon
/var/lib/portsentry/portsentry.blocked.*
blocked hosts(cleared upon reload)
/var/lib/portsentry/portsentry.history
history file
SEE ALSO
portsentry.conf(5), hosts_access(5), hosts_options(5), route(8), ipfwadm(8), ipchains(8), iptables(8), ifconfig(8)
/usr/share/doc/portsentry/README.install
AUTHOR
portsentry was written by Craig H. Howland <crowland@users.sf.net>.
This manual page was stitched together by Guido Guenther <agx@debian.org>, for the Debian GNU/Linux system (but may be used by others).
Some parts are just a cut and paste from the original documentation.
PORTSENTRY(8)