fence_eps(8) [debian man page]
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8) NAME
fence_eps - Fence agent for ePowerSwitch DESCRIPTION
fence_eps is an I/O Fencing agent which can be used with the ePowerSwitch 8M+ power switch to fence connected machines. Fence agent works ONLY on 8M+ device, because this is only one, which has support for hidden page feature. Agent basically works by connecting to hidden page and pass appropriate arguments to GET request. This means, that hidden page feature must be enabled and properly configured. fence_eps accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_eps can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. Vendor URL: http://www.epowerswitch.com PARAMETERS
-o, --action=<action> Fencing Action (Default Value: reboot) -a, --ip=<ip> IP Address or Hostname This parameter is always required. -l, --username=<name> Login Name -p, --password=<password> Login password or passphrase -S, --password-script=<script> Script to retrieve password -n, --plug=<id> Physical plug number or name of virtual machine This parameter is always required. -c, --page=<page> Name of hidden page (Default Value: hidden.htm) -v, --verbose Verbose mode -D, --debug-file=<debugfile> Write debug information to given file -V, --version Display version information and exit -h, --help Display help and exit -C, --separator=<char> Separator for CSV created by operation list (Default Value: ,) --delay Wait X seconds before fencing is started (Default Value: 0) --retry-on Count of attempts to retry power on (Default Value: 1) ACTIONS
on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise. monitor Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does not support more). metadata The operational behavior of this is not known. STDIN PARAMETERS
action Fencing Action (Default Value: reboot) ipaddr IP Address or Hostname This parameter is always required. login Login Name passwd Login password or passphrase passwd_script Script to retrieve password port Physical plug number or name of virtual machine This parameter is always required. hidden_page Name of hidden page (Default Value: hidden.htm) verbose Verbose mode debug Write debug information to given file version Display version information and exit help Display help and exit separator Separator for CSV created by operation list (Default Value: ,) delay Wait X seconds before fencing is started (Default Value: 0) retry_on Count of attempts to retry power on (Default Value: 1) fence_eps (Fence Agent) 2009-10-20 FENCE_AGENT(8)
Check Out this Related Man Page
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8) NAME
fence_eps - Fence agent for ePowerSwitch DESCRIPTION
fence_eps is an I/O Fencing agent which can be used with the ePowerSwitch 8M+ power switch to fence connected machines. Fence agent works ONLY on 8M+ device, because this is only one, which has support for hidden page feature. Agent basically works by connecting to hidden page and pass appropriate arguments to GET request. This means, that hidden page feature must be enabled and properly configured. fence_eps accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_eps can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. Vendor URL: http://www.epowerswitch.com PARAMETERS
-a, --ip=[ip] IP Address or Hostname This parameter is always required. -l, --username=[name] Login Name -p, --password=[password] Login password or passphrase -n, --plug=[id] Physical plug number, name of virtual machine or UUID This parameter is always required. -c, --page=[page] Name of hidden page (Default Value: hidden.htm) -u, --ipport=[port] TCP/UDP port to use for connection with device (Default Value: 23) -4, --inet4-only Forces agent to use IPv4 addresses only -6, --inet6-only Forces agent to use IPv6 addresses only -S, --password-script=[script] Script to retrieve password -o, --action=[action] Fencing Action (Default Value: reboot) -v, --verbose Verbose mode -D, --debug-file=[debugfile] Write debug information to given file -V, --version Display version information and exit -h, --help Display help and exit -C, --separator=[char] Separator for CSV created by operation list (Default Value: ,) --power-timeout=[seconds] Test X seconds for status change after ON/OFF (Default Value: 20) --shell-timeout=[seconds] Wait X seconds for cmd prompt after issuing command (Default Value: 3) --login-timeout=[seconds] Wait X seconds for cmd prompt after login (Default Value: 5) --power-wait=[seconds] Wait X seconds after issuing ON/OFF (Default Value: 0) --delay=[seconds] Wait X seconds before fencing is started (Default Value: 0) --retry-on=[attempts] Count of attempts to retry power on (Default Value: 1) ACTIONS
on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise. monitor Check the health of fence device metadata Display the XML metadata describing this resource. STDIN PARAMETERS
ipaddr IP Address or Hostname This parameter is always required. login Login Name passwd Login password or passphrase port Physical plug number, name of virtual machine or UUID This parameter is always required. hidden_page Name of hidden page (Default Value: hidden.htm) ipport TCP/UDP port to use for connection with device (Default Value: 23) inet4_only Forces agent to use IPv4 addresses only inet6_only Forces agent to use IPv6 addresses only passwd_script Script to retrieve password action Fencing Action (Default Value: reboot) verbose Verbose mode debug Write debug information to given file version Display version information and exit help Display help and exit separator Separator for CSV created by operation list (Default Value: ,) power_timeout Test X seconds for status change after ON/OFF (Default Value: 20) shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3) login_timeout Wait X seconds for cmd prompt after login (Default Value: 5) power_wait Wait X seconds after issuing ON/OFF (Default Value: 0) delay Wait X seconds before fencing is started (Default Value: 0) retry_on Count of attempts to retry power on (Default Value: 1) fence_eps (Fence Agent) 2009-10-20 FENCE_AGENT(8)