OCF_PACEMAKER_HEALTH(7) Pacemaker Configuration OCF_PACEMAKER_HEALTH(7)NAME
ocf_pacemaker_HealthSMART - SMART health status
SYNOPSIS
OCF_RESKEY_state=string OCF_RESKEY_drives=string OCF_RESKEY_devices=string OCF_RESKEY_temp_lower_limit=string
OCF_RESKEY_temp_upper_limit=string OCF_RESKEY_temp_warning=string
HealthSMART [start | stop | monitor | meta-data | validate-all]
DESCRIPTION
Systhem health agent that checks the S.M.A.R.T. status of the given drives and updates the #health-smart attribute.
SUPPORTED PARAMETERS
OCF_RESKEY_state = string [/HealthSMART-{OCF_RESOURCE_INSTANCE}.state]
State file
Location to store the resource state in.
OCF_RESKEY_drives = string [/dev/sda]
Drives to check
The drive(s) to check as a SPACE separated list. Enter the full path to the device, e.g. "/dev/sda".
OCF_RESKEY_devices = string
Device types
The device type(s) to assume for the drive(s) being tested as a SPACE separated list.
OCF_RESKEY_temp_lower_limit = string [0]
Lower limit for the red smart attribute
Lower limit of the temperature in deg C of the drive(s). Below this limit the status will be red.
OCF_RESKEY_temp_upper_limit = string [60]
Upper limit for red smart attribute
Upper limit of the temperature if deg C of the drives(s). If the drive reports a temperature higher than this value the status of
#health-smart will be red.
OCF_RESKEY_temp_warning = string [5]
Deg C below/above the upper limits for yellow smart attribute
Number of deg C below/above the upper/lower temp limits at which point the status of #health-smart will change to yellow.
AUTHOR
Andrew Beekhof <andrew@beekhof.net>
Author.
Pacemaker Configuration 04/17/2012 OCF_PACEMAKER_HEALTH(7)
Check Out this Related Man Page
POLICY ENGINE(7) Pacemaker Configuration POLICY ENGINE(7)NAME
pengine - Policy Engine Options
SYNOPSIS
[no-quorum-policy=enum] [symmetric-cluster=boolean] [default-resource-stickiness=integer] [is-managed-default=boolean]
[maintenance-mode=boolean] [start-failure-is-fatal=boolean] [enable-startup-probes=boolean] [stonith-enabled=boolean] [stonith-action=enum]
[stonith-timeout=time] [startup-fencing=boolean] [cluster-delay=time] [batch-limit=integer] [migration-limit=integer]
[default-action-timeout=time] [stop-all-resources=boolean] [stop-orphan-resources=boolean] [stop-orphan-actions=boolean]
[remove-after-stop=boolean] [pe-error-series-max=integer] [pe-warn-series-max=integer] [pe-input-series-max=integer]
[node-health-strategy=enum] [node-health-green=integer] [node-health-yellow=integer] [node-health-red=integer] [placement-strategy=enum]
DESCRIPTION
This is a fake resource that details the options that can be configured for the Policy Engine.
SUPPORTED PARAMETERS
no-quorum-policy = enum [stop]
What to do when the cluster does not have quorum
What to do when the cluster does not have quorum Allowed values: stop, freeze, ignore, suicide
symmetric-cluster = boolean [true]
All resources can run anywhere by default
default-resource-stickiness = integer [0]
is-managed-default = boolean [true]
Should the cluster start/stop resources as required
maintenance-mode = boolean [false]
Should the cluster monitor resources and start/stop them as required
start-failure-is-fatal = boolean [true]
Always treat start failures as fatal
This was the old default. However when set to FALSE, the cluster will instead use the resource's failcount and value for
resource-failure-stickiness
enable-startup-probes = boolean [true]
Should the cluster check for active resources during startup
stonith-enabled = boolean [true]
Failed nodes are STONITH'd
stonith-action = enum [reboot]
Action to send to STONITH device
Action to send to STONITH device Allowed values: reboot, poweroff
stonith-timeout = time [60s]
How long to wait for the STONITH action to complete
startup-fencing = boolean [true]
STONITH unseen nodes
Advanced Use Only! Not using the default is very unsafe!
cluster-delay = time [60s]
Round trip delay over the network (excluding action execution)
The "correct" value will depend on the speed and load of your network and cluster nodes.
batch-limit = integer [30]
The number of jobs that the TE is allowed to execute in parallel
The "correct" value will depend on the speed and load of your network and cluster nodes.
migration-limit = integer [-1]
The number of migration jobs that the TE is allowed to execute in parallel on a node
default-action-timeout = time [20s]
How long to wait for actions to complete
stop-all-resources = boolean [false]
Should the cluster stop all active resources (except those needed for fencing)
stop-orphan-resources = boolean [true]
Should deleted resources be stopped
stop-orphan-actions = boolean [true]
Should deleted actions be cancelled
remove-after-stop = boolean [false]
Remove resources from the LRM after they are stopped
Always set this to false. Other values are, at best, poorly tested and potentially dangerous.
pe-error-series-max = integer [-1]
The number of PE inputs resulting in ERRORs to save
Zero to disable, -1 to store unlimited.
pe-warn-series-max = integer [5000]
The number of PE inputs resulting in WARNINGs to save
Zero to disable, -1 to store unlimited.
pe-input-series-max = integer [4000]
The number of other PE inputs to save
Zero to disable, -1 to store unlimited.
node-health-strategy = enum [none]
The strategy combining node attributes to determine overall node health.
Requires external entities to create node attributes (named with the prefix '#health') with values: 'red', 'yellow' or 'green'. Allowed
values: none, migrate-on-red, only-green, progressive, custom
node-health-green = integer [0]
The score 'green' translates to in rsc_location constraints
Only used when node-health-strategy is set to custom or progressive.
node-health-yellow = integer [0]
The score 'yellow' translates to in rsc_location constraints
Only used when node-health-strategy is set to custom or progressive.
node-health-red = integer [-INFINITY]
The score 'red' translates to in rsc_location constraints
Only used when node-health-strategy is set to custom or progressive.
placement-strategy = enum [default]
The strategy to determine resource placement
The strategy to determine resource placement Allowed values: default, utilization, minimal, balanced
AUTHOR
Andrew Beekhof <andrew@beekhof.net>
Author.
Pacemaker Configuration 04/17/2012 POLICY ENGINE(7)