SHOREWALL6-NETMAP(5) [FIXME: manual] SHOREWALL6-NETMAP(5)
NAME
netmap - Shorewall6 NETMAP definition file
SYNOPSIS
/etc/shorewall/netmap
DESCRIPTION
This file is used to map addresses in one network to corresponding addresses in a second network. It was added in Shorewall6 iin 4.4.23.3.
Warning
To use this file, your kernel and ip6tables must have RAWPOST table support included.
The columns in the file are as follows (where the column name is followed by a different name in parentheses, the different name is used in
the alternate specification syntax).
TYPE - {DNAT|SNAT}:{P|O|T}
Must be DNAT or SNAT followed by :P, :O or :T to perform stateless NAT. Stateless NAT requires Rawpost Table support in your kernel and
iptables (see the output of shorewall6 show capabilities).
If DNAT:P, traffic entering INTERFACE and addressed to NET1 has its destination address rewritten to the corresponding address in NET2.
If SNAT:T, traffic leaving INTERFACE with a source address in NET1 has it's source address rewritten to the corresponding address in
NET2.
If DNAT:O, traffic originating on the firewall and leaving via INTERFACE and addressed to NET1 has its destination address rewritten to
the corresponding address in NET2.
If DNAT:P, traffic entering via INTERFACE and addressed to NET1 has its destination address rewritten to the corresponding address in
NET2.
If SNAT:P, traffic entering via INTERFACE with a destination address in NET1 has it's source address rewritten to the corresponding
address in NET2.
If SNAT:O, traffic originating on the firewall and leaving via INTERFACE with a source address in NET1 has it's source address
rewritten to the corresponding address in NET2.
NET1 - network-address
Network in CIDR format (e.g., 2001:470:b:227/64). Beginning in Shorewall6 4.4.24, exclusion[1] is supported.
INTERFACE - interface
The name of a network interface. The interface must be defined in shorewall6-interfaces[2](5). Shorewall allows loose matches to
wildcard entries in shorewall6-interfaces[2](5). For example, ppp0 in this file will match a shorewall6-interfaces[2](8) entry that
defines ppp+.
NET2 - network-address
Network in CIDR format
NET3 - network-address
Optional - added in Shorewall 4.4.11. If specified, qualifies INTERFACE. It specifies a SOURCE network for DNAT rules and a DESTINATON
network for SNAT rules.
PROTO (Optional - protocol-number-or-name
Only packets specifying this protocol will have their IP header modified.
DEST PORT(S) (dport) - port-number-or-name-list
Destination Ports. An optional comma-separated list of Port names (from services(5)), port numbers or port ranges; if the protocol is
icmp, this column is interpreted as the destination icmp-type(s). ICMP types may be specified as a numeric type, a numberic type and
code separated by a slash (e.g., 3/4), or a typename. See http://www.shorewall.net/configuration_file_basics.htm#ICMP.
If the protocol is ipp2p, this column is interpreted as an ipp2p option without the leading "--" (example bit for bit-torrent). If no
PORT is given, ipp2p is assumed.
An entry in this field requires that the PROTO column specify icmp (1), tcp (6), udp (17), sctp (132) or udplite (136). Use '-' if any
of the following field is supplied.
SOURCE PORT(S) (sport) - port-number-or-name-list
Optional source port(s). If omitted, any source port is acceptable. Specified as a comma-separated list of port names, port numbers or
port ranges.
An entry in this field requires that the PROTO column specify tcp (6), udp (17), sctp (132) or udplite (136). Use '-' if any of the
following fields is supplied.
FILES
/etc/shorewall/netmap
SEE ALSO
http://shorewall.net/netmap.html
http://shorewall.net/configuration_file_basics.htm#Pairs
NOTES
1. exclusion
http://www.shorewall.net/manpages6/shorewall6-exclusion.html
2. shorewall6-interfaces
http://www.shorewall.net/manpages6/shorewall6-interfaces.html
[FIXME: source] 06/28/2012 SHOREWALL6-NETMAP(5)