PROL(5) RDS FILE FORMATS PROL(5)
NAME
prol - define the rules for symbolic to real layout translation
ORIGIN
This software belongs to the ALLIANCE CAD SYSTEM developed by the ASIM team at LIP6 laboratory of Universite Pierre et Marie CURIE, in
Paris, France.
Web : http://asim.lip6.fr/recherche/alliance/
E-mail : alliance-users@asim.lip6.fr
DESCRIPTION
This file describes the rules used by the mbk(1) to rds translator. In the following file, symbolic layout objects are refered as mbk(1)
objects, mbk(1) being the internal data structure that supports symbolic representation. On the other hand, rds is a data structure
describing mainly rectangles, and is therefore used for real layout representation.
Some syntaxic remarques on the way to write the file follow. The case of identifiers is not significant, so NDIF is equivalent to NdiF.
Comments are allowed anywhere in the file, using the sharp (#) as start of comment, and newline as end of comment. A line begining with a
sharp will be ignored, and a line containing a sharp will be read up to the character preeceding it. A newline can be escaped using the
backslash ( followed by the newline. If some character, spaces or tabs for example, follow the backslash, chances are that a syntax error
will be issued.
First, some important process parameters are needed, the physical grid step, that is the least common multiple of all the technologies val-
ues in terms of layout distances, and the lambda, computed from a careful observation of the process design rules.
Then, a set of tables is needed, to describe how to translate a symbolic object, belonging to the mbk(1) world, and a set of layout rectan-
gles, in rds.
Each table has a special meaning, and its parametrization exend beeing not full, some borders are to be evocated. Several type of table
exists indeed. Some are needed for object translation, others for post treatment parametrization, others to define cif or gds identifiers
regarding rds ones.
Many things seem to be parametrizable, but in fact, mostly, if not only, numbers, names in cif and gds translation tables, and boolean
value in post treatement may be changed without problems.
For any table, if some layer is not applicable, it can simply be omitted. The default action is `do nothing', or use a value of 0.0 for
all entries.
LAYERS AND PATTERNS
Since the goal of this file is to allow translation from mbk(1) to rds, the meaning of the layers in both representation shall be known.
Mbk layers
NWELL minimum width 4 ; N-well.
PWELL minimum width 4 ; P-well.
NTIE minimum width 2 ; N diffusion for polarisation.
PTIE minimum width 2 ; P diffusion for polarisation.
NDIF minimum width 2 ; N diffusion for transistor.
PDIF minimum width 2 ; P diffusion for transistor.
NTRANS minimum width 1 (gate width) ; N transistor.
PTRANS minimum width 1 (gate width) ; P transistor.
POLY minimum width 1 ; polysilicon, not transistor gate.
ALU1 minimum width 1 ; first level of metal.
ALU2 minimum width 2 ; second level of metal.
ALU3 minimum width 3 ; third level of metal (unused).
TPOLY minimum width 1 ; through route for POLY.
TALU1 minimum width 1 ; through route for ALU1.
TALU2 minimum width 2 ; through route for ALU2.
TALU3 minimum width 3 ; through route for ALU3 (unused).
Mbk patterns
CONT_POLY cut pattern from ALU1 to POLY
CONT_VIA cut pattern from ALU1 to ALU2
CONT_VIA2 cut pattern from ALU2 to ALU3
CONT_DIF_N cut pattern from ALU1 to NDIF
CONT_DIF_P cut pattern from ALU1 to PDIF
CONT_BODY_N cut pattern from ALU1 to NTIE
CONT_BODY_P cut pattern from ALU1 to PTIE
C_X_N corner primitive for L or S shaped N transistor
C_X_P corner primitive for L or S shaped P transistor
Rds layers
RDS_NWELL N-well (or N-tub), bulk for P transistors.
RDS_PWELL P-well (or P-tub), bulk for N transistors.
RDS_NDIF use for symbolic extractor as equivalent of NDIF.
RDS_PDIF use for symbolic extractor as equivalent of PDIF.
RDS_NTIE use for symbolic extractor as equivalent of NTIE.
RDS_PTIE use for symbolic extractor as equivalent of PTIE.
RDS_POLY polysillicon run, for cell internal wirering.
RDS_GATE transistor polysillicon, for gate.
RDS_TPOLY polysillicon feed through. Indicate to a router that a track is free of polysillicon.
RDS_CONT hole in the isolating layer between polysillicon or active area and first metal level.
RDS_ALU1 first metal level run.
RDS_TALU1 first metal level feed through. Indicates to a router that a track is free of first metal level.
RDS_VIA1 hole in the isolating layer between first metal level and second metal level.
RDS_ALU2 second metal level run.
RDS_TALU2 second metal level feed through. Indicate to a router that a track is free of second metal level.
RDS_VIA2 hole in the isolating layer between second metal level and third metal level.
RDS_ALU3 third metal level run.
RDS_TALU3 third metal level feed through. Indicate to a router that a track is free of third metal level.
RDS_ALU4 fourth metal. (Used only for GaAs designs.)
RDS_VIA3 hole in the isolating layer between third metal level and fourth metal level. (Used only for GaAs designs.)
RDS_ACTIV active area dropped in N or P implant to build transistors.
RDS_NIMP implant area, (sometime known as N select), for N transistors.
RDS_PIMP implant area, (sometime known as P select), for P transistors.
RDS_CPAS passivation, used in pads.
RDS_USER0 user defined purpose layer. (May be used for DRC logical operations.)
RDS_USER1 user defined purpose layer. (May be used for DRC logical operations.)
RDS_USER2 user defined purpose layer. (May be used for DRC logical operations.)
RDS_REF virtual layer for the representation of symbolic references
RDS_ABOX virtual layer needed to indicate the abutment box of a model.
RDS_DEFAULT default layer, shall never appear anywhere.
FILE DESCRIPTION
The following lines describe the file, entry by entry, specifying what is expected.
Physical grid DEFINE PHYSICAL_GRID .5
This statement defines the minimum grid spacing enforced by the foundry.
Lambda DEFINE LAMBDA 1
This defines the value of the lambda in microns. This value, like any other one in the rest of the file must be a mul-
tiple of the PHYSICAL_GRID.
Segment translation table
TABLE MBK_TO_RDS_SEGMENT
This table contains all the informations needed to translate a symbolic segment of a given layer onto one, two or three
real rectangles of specified layers. An example of this table is given below, with values needed for a technology
where one lambda is equal to 1.05 and the design grid is set to 0.15 microns.
TABLE MBK_TO_RDS_SEGMENT
NWELL RDS_NWELL VW 3.15 6.30 0.0 ALL
NDIF RDS_ACTIV VW 0.60 -0.90 0.0 ALL
RDS_NIMP VW 2.10 2.10 0.0 ALL
PDIF RDS_ACTIV VW 0.60 -0.90 0.0 ALL
RDS_PIMP VW 2.10 2.10 0.0 ALL
NTIE RDS_ACTIV VW 0.60 -0.90 0.0 ALL
RDS_NIMP VW 1.20 0.30 0.0 ALL
PTIE RDS_ACTIV VW 0.60 -0.90 0.0 ALL
RDS_PIMP VW 1.20 0.30 0.0 ALL
NTRANS RDS_GATE VW 0.00 0.15 0.0 ALL
RDS_ACTIV VW -1.50 4.35 0.0 ALL
RDS_NIMP VW 0.00 7.35 0.0 ALL
PTRANS RDS_GATE VW 0.00 0.15 0.0 ALL
RDS_ACTIV VW -1.50 4.35 0.0 ALL
RDS_PIMP VW 0.00 7.35 0.0 ALL
POLY RDS_POLY VW 0.60 0.15 0.0 ALL
ALU1 RDS_ALU1 VW 0.90 0.75 0.0 ALL
ALU2 RDS_ALU2 VW 0.90 -0.30 0.0 ALL
TPOLY RDS_TPOLY VW 0.60 0.15 0.0 ALL
TALU1 RDS_TALU1 VW 0.90 0.75 0.0 ALL
TALU2 RDS_TALU2 VW 0.90 -0.30 0.0 ALL
END
The first column is the mbk(1) layer name to be translated, then there one or more groups of 6 columns each. For each
physical rectangle, there are 3 parameters :
- rds layer name
- One of VW, LCW, RCW that indicates the `type' of segment to be generated
- physical length extension: DLR
- physical width oversize: DWR
- offset from symbolic axis: OFFSET
- tools for which the generated rectangle is applicable: ALL, DRC (for the symbolic design rule checker, see druc(1)),
EXT (for the symbolic extractor, see lynx(1)) These parameters are meant regarding the symbolic segment.
Connectors translation table
TABLE MBK_TO_RDS_CONNECTOR
This table contains all the informations needed to translate a symbolic connector of a given layer onto one single real
rectangle.
An example of this table is given below, with values needed for a technology where one lambda is equal to 1.05 and the
design grid is set to 0.15 micron.
TABLE MBK_TO_RDS_CONNECTOR
POLY RDS_POLY 0.6 0.15
ALU1 RDS_ALU1 0.9 0.75
ALU2 RDS_ALU2 0.9 -0.3
END
One symbolic connector is translated into one physical rectangle using 3 parameters :
- rds layer name
- physical width oversize: DWR
- physical extension on each side of the abutment box: DER
It is discouraged to use active or well layers as connectors while designing.
Vias translation table
TABLE MBK_TO_RDS_VIA
This table contains all the informations needed to translate a symbolic via of a given layer onto one to four real rec-
tangles of user specified layers. An example of this table is given below, with values needed for a technology where
one lambda is equal to 1.05 and the design grid is set to 0.15 micron.
TABLE MBK_TO_RDS_VIA
CONT_BODY_N RDS_ALU1 3 RDS_CONT 1.5 RDS_ACTIV 3.3 RDS_NIMP 4.5
CONT_BODY_P RDS_ALU1 3 RDS_CONT 1.5 RDS_ACTIV 3.3 RDS_PIMP 4.5
CONT_DIF_N RDS_ALU1 3 RDS_CONT 1.5 RDS_ACTIV 3.3 RDS_NIMP 6.3
CONT_DIF_P RDS_ALU1 3 RDS_CONT 1.5 RDS_ACTIV 3.3 RDS_PIMP 6.3
CONT_POLY RDS_ALU1 3 RDS_CONT 1.5 RDS_POLY 3
CONT_VIA RDS_ALU1 3 RDS_VIA1 1.5 RDS_ALU2 3
CONT_VIA2
C_X_N RDS_GATE 1.2 RDS_ACTIV 5.4 RDS_NIMP 8.4
C_X_P RDS_GATE 1.2 RDS_ACTIV 5.4 RDS_PIMP 8.4
END
This table describes how to translate one symbolic via, to 2, 3 or 4 physical rectangles. The table is defined as fol-
low : The first column is the mbk(1) via name to translate, then there are 4 groups of 2 columns each, which correspond
to four potential targets rds rectangles of user specified layer. In one group the first column is the rds layer name,
the second one is the rds layer width. The rectangle is centered on the contact coordinates, and expands in the four
direction of half the given width value.
Denotching values table
TABLE S2R_OVERSIZE_DENOTCH
This table contains the oversize value needed to erase notches. All the rectangles of the same rds layer are oversized
by this value and then merged alltogether and undersized by the same value. An example of this table is given below.
TABLE S2R_OVERSIZE_DENOTCH
RDS_NWELL 3.00
RDS_POLY 0.75
RDS_GATE 0.75
RDS_ALU1 0.75
RDS_ALU2 0.75
RDS_ACTIV 1.05
RDS_NIMP 2.55
RDS_PIMP 2.55
END
For some rds layers, like RDS_NWELL, RDS_NIMP and RDS_PIMP, two rectangles distant from less or equal the minimun spac-
ing design rule must be merged in a single one. In this case, the oversize value is equal to the minimum spacing rule
between two edges of the same layer divided by 2.
Some other rds layers, like RDS_ALU1, ..., must not be merged. In this case, the oversize value is equal to the mini-
mum spacing rule between two edges of the same layer divided by 2, minus the physical grid.
Some layers never create notch, such as RDS_VIA1 or RDS_CONT, so the oversize value is null.
Ring width TABLE S2R_BLOC_RING_WIDTH
s2r must merge segments to erase notches even if those segments are in two different hierarchical level blocs, for
example, two blocs abuted side to side. So, it must be able to fetch segments inside blocs. It is not needed to flat-
ten the entire bloc, only a ring is necessary. The ring is computed from the abutment box edges or from the envelop
edges of the overlapping blocs.
An example of this table is given below.
TABLE S2R_BLOC_RING_WIDTH
RDS_NWELL 6
RDS_POLY 1.8
RDS_GATE 1.8
RDS_ALU1 1.8
RDS_ALU2 1.8
RDS_ACTIV 2.4
RDS_NIMP 1.8
RDS_PIMP 1.8
END
The normal ring width is the minimum spacing design rule between two segments of the same rds layer.
A zero means that no ring is wanted for that rds layer.
Minimum real layer width design rule
TABLE S2R_MINIMUM_LAYER_WIDTH
This table contains the minimum width of each rds layer. It is used by s2r to avoid creating rectangles below the min-
imum required, during the merge operation.
TABLE S2R_MINIMUM_LAYER_WIDTH
RDS_NWELL 6
RDS_POLY 1.2
RDS_GATE 1.2
RDS_ALU1 1.8
RDS_ALU2 1.8
RDS_ACTIV 1.2
RDS_NIMP 2.7
RDS_PIMP 2.7
END
A zero can be specified, when it is sure that this layer is not to be merged, because not treated by s2r.
Post treatment configuration table
TABLE S2R_POST_TREAT
This table indicates to s2r which rds layers must be post-processed. Precicely if a layer is only to be be translated,
or translated and then post-processed. Translated means translate and fit from symbolic to real, and postreated that
it should also be merged with its neighbours. For example, it's not necesary to merge cut layers such as RDS_CONT.
TABLE S2R_POST_TREAT
RDS_NWELL TREAT NULL
RDS_PWELL NOTREAT NULL
RDS_NDIF NOTREAT NULL
RDS_PDIF NOTREAT NULL
RDS_NTIE NOTREAT NULL
RDS_PTIE NOTREAT NULL
RDS_POLY TREAT NULL
RDS_GATE TREAT NULL
RDS_TPOLY NOTREAT NULL
RDS_CONT NOTREAT NULL
RDS_ALU1 TREAT NULL
RDS_TALU1 NOTREAT NULL
RDS_VIA1 NOTREAT NULL
RDS_ALU2 TREAT NULL
RDS_TALU2 NOTREAT NULL
RDS_VIA2 NOTREAT NULL
RDS_ALU3 NOTREAT NULL
RDS_TALU3 NOTREAT NULL
RDS_ACTIV TREAT NULL
RDS_NIMP TREAT RDS_PIMP
RDS_PIMP TREAT RDS_NIMP
RDS_REF NOTREAT NULL
RDS_ABOX NOTREAT NULL
END
If set to NOTREAT, the first parameter indicates a translation. If set to TREAT, then the layer is translated and then
post-treated
To post-process creates problems with the implantation layers. It is possible to have a good symbolic layout (no sym-
bolic design rule errors), and have a resulting layout with DRC violations, created by a poor post-processing. It is
due to the fact that these layers do not exist in symbolic, so it is not possible to apply them drc verifications. If
two rectangles of these layers are too close (less than a given value), they must be merged. Generally, there is no
problem, but when corners are too near it is impossible to merge with the classical algorithm, expand, merge, then
shrink.
Rectangles, known as scotches, are created to merge anyway, like this :
+--------+ +--------+ +-----+--+
|////////| |////////| |/////|//|
|//+--+//| |//+--+//| |//+--|//|
|//| |//| gives -> |//| |//| or -> |//| |//|
|//+--+//| +-----------+ |//+--|//|
|////////| |///////////| |/////|//|
+--------+ +--------+//| +-----|//|
^ +--------+ |//|-----+ |//+--------+
| |////////| |//|/////| |///////////|
o--->|//+--+//| |//|--+//| +-----------+
| |//| |//| |//| |//| |//| |//|
implant |//+--+//| |//|--+//| |//|--+//|
areas |////////| |//|/////| |//|/////|
+--------+ +--+-----+ +--+-----+
A N implantation layer should not overlap a P implantation one. We say that P implantations and N implantations are
complementary. A scotch will not be created if it intersects with any of the rectangles of the complementary layers.
If a record contains in the second field a rds layer different from NULL, it indicates the complementary layer. This
implies that if it is a layer that might need scotches the algorithm will try not to intersect with it when creating
scotches.
Extraction graph table
TABLE LYNX_GRAPH
This table gives the connexion graph between the rds layers. For each layer, the list of the connectable layers is
written. Up to now, the extractor works only on translated symbolic layout.
TABLE LYNX_GRAPH
RDS_NDIF RDS_CONT RDS_NDIF
RDS_PDIF RDS_CONT RDS_PDIF
RDS_NTIE RDS_CONT RDS_NTIE
RDS_PTIE RDS_CONT RDS_PTIE
RDS_POLY RDS_CONT RDS_GATE RDS_POLY
RDS_GATE RDS_POLY RDS_GATE
RDS_CONT RDS_PDIF RDS_NDIF RDS_POLY RDS_PTIE RDS_NTIE RDS_ALU1 RDS_CONT
RDS_ALU1 RDS_CONT RDS_VIA1 RDS_ALU1 RDS_REF
RDS_REF RDS_CONT RDS_VIA1 RDS_ALU1 RDS_REF
RDS_VIA1 RDS_ALU1 RDS_ALU2 RDS_VIA1
RDS_ALU2 RDS_VIA1 RDS_VIA2 RDS_ALU2
RDS_VIA2 RDS_ALU2 RDS_ALU3 RDS_VIA2
RDS_ALU3 RDS_VIA2 RDS_ALU3
END
Extraction capacitance table
TABLE LYNX_CAPA
This table gives the capacitance in picofarad per square lambda of each layer. The extractor computes only substrat
capacitances. The capacitances associated with gate or drain or sources are not computed. On the other hand the tran-
sistor sizes (area, perimeter) are computed. (This is to ensure compatibility with Spice).
TABLE LYNX_CAPA
RDS_POLY 1.00e-04
RDS_ALU1 0.50e-04
RDS_ALU2 0.25e-04
END
Cif translation table
TABLE CIF_LAYER
This table gives the equivalence between internal layers and their representation in the cif file format. A table may
look like that (for MOSIS layers):
TABLE CIF_LAYER
RDS_NWELL CWN
RDS_PWELL CWP
RDS_ACTIV CAA
RDS_NIMP CSN
RDS_PIMP CSP
RDS_POLY CPG
RDS_GATE CPG
RDS_CONT CCA
RDS_ALU1 CMF
RDS_VIA1 CVA
RDS_ALU2 CMS
END
Gds translation table
TABLE GDS_LAYER
This table gives the equivalence between internal layers and there representation in the gds file. A table may look
like that (for CMP layers):
TABLE GDS_LAYER
RDS_NWELL 1
RDS_POLY 11
RDS_GATE 11
RDS_CONT 16
RDS_ALU1 17
RDS_VIA1 18
RDS_ALU2 19
RDS_ACTIV 2
RDS_NIMP 12
RDS_PIMP 14
RDS_CPAS 20
END
SEE ALSO
Insights on the symbolic to real translation process are available in the file mapping.ps
BUG REPORT
This tool is under development at the ASIM department of the LIP6 laboratory.
We need your feedback to improve documentation and tools.
ASIM
/LIP6 October 1, 1997 PROL(5)