PGBOUNCER(5) PGBOUNCER(5)
NAME
pgbouncer - Lightweight connection pooler for PostgreSQL.
SYNOPSIS
[databases]
db = ...
[pgbouncer]
...
DESCRIPTION
Config file is in "ini" format. Section names are between " and ". Lines starting with ";" or "" are taken as comments and ignored. The
characters ";" and "" are not recognized when they appear later in the line.
SECTION
[PGBOUNCER]
Generic settings
logfile
Specifies log file. Log file is kept open so after rotation kill -HUP or on console RELOAD; should be done. Note: On Windows machines,
the service must be stopped and started.
Default: not set.
pidfile
Specifies the pid file. Without a pidfile, daemonization is not allowed.
Default: not set.
listen_addr
Specifies list of addresses, where to listen for TCP connections. You may also use * meaning "listen on all addresses". When not set,
only Unix socket connections are allowed.
Addresses can be specified numerically (IPv4/IPv6) or by name.
Default: not set
listen_port
Which port to listen on. Applies to both TCP and Unix sockets.
Default: 6432
unix_socket_dir
Specifies location for Unix sockets. Applies to both listening socket and server connections. If set to an empty string, Unix sockets
are disabled. Required for online reboot (-R) to work. Note: Not supported on Windows machines.
Default: /tmp
unix_socket_mode
Filesystem mode for unix socket.
Default: 0777
unix_socket_group
Group name to use for unix socket.
Default: not set
user
If set, specifies the Unix user to change to after startup. Works only if PgBouncer is started as root or if user is the same as the
current user. Note: Not supported on Windows machines.
Default: not set
auth_file
The name of the file to load user names and passwords from. The file format is the same as the PostgreSQL pg_auth/pg_pwd file, so this
setting can be pointed directly to one of those backend files.
Default: not set.
auth_type
How to authenticate users.
md5
Use MD5-based password check. auth_file may contain both MD5-encrypted or plain-text passwords. This is the default authentication
method.
crypt
Use crypt(3) based password check. auth_file must contain plain-text passwords.
plain
Clear-text password is sent over wire.
trust
No authentication is done. Username must still exist in auth_file.
any
Like the trust method, but the username given is ignored. Requires that all databases are configured to log in as specific user.
Additionally, the console database allows any user to log in as admin.
pool_mode
Specifies when a server connection can be reused by other clients.
session
Server is released back to pool after client disconnects. Default.
transaction
Server is released back to pool after transaction finishes.
statement
Server is released back to pool after query finishes. Long transactions spanning multiple statements are disallowed in this mode.
max_client_conn
Maximum number of client connections allowed. When increased then the file descriptor limits should also be increased. Note that actual
number of file descriptors used is more than max_client_conn. Theoretical maximum used is:
max_client_conn + (max_pool_size * total_databases * total_users)
if each user connects under its own username to server. If a database user is specified in connect string (all users connect under same
username), the theoretical maximum is:
max_client_conn + (max_pool_size * total_databases)
The theoretical maximum should be never reached, unless somebody deliberately crafts special load for it. Still, it means you should
set the number of file descriptors to a safely high number.
Search for ulimit in your favourite shell man page. Note: ulimit does not apply in a Windows environment.
Default: 100
default_pool_size
How many server connections to allow per user/database pair. Can be overridden in the per-database configuration.
Default: 20
min_pool_size
Add more server connections to pool if below this number. Improves behaviour when usual load comes suddenly back after period of total
inactivity.
Default: 0 (disabled)
reserve_pool_size
How many additional connections to allow to a pool. 0 disables.
Default: 0 (disabled)
reserve_pool_timeout
If a client has not been serviced in this many seconds, pgbouncer enables use of additional connections from reserve pool. 0 disables.
Default: 5
server_round_robin
By default, pgbouncer reuses server connections in LIFO (last-in, first-out) manner, so that few connections get the most load. This
gives best performance if you have a single server serving a database. But if there is TCP round-robin behind a database IP, then it is
better if pgbouncer also uses connections in that manner, thus achieving uniform load.
Default: 0
ignore_startup_parameters
By default, PgBouncer allows only parameters it can keep track of in startup packets - client_encoding, datestyle, timezone and
standard_conforming_strings.
All others parameters will raise an error. To allow others parameters, they can be specified here, so that pgbouncer knows that they
are handled by admin and it can ignore them.
Default: empty
disable_pqexec
Disable Simple Query protocol (PQexec). Unlike Extended Query protocol, Simple Query allows multiple queries in one packet, which
allows some classes of SQL-injection attacks. Disabling it can improve security. Obviously this means only clients that exclusively use
Extended Query protocol will stay working.
Default: 0
Log settings
syslog
Toggles syslog on/off As for windows environment, eventlog is used instead.
Default: 0
syslog_ident
Under what name to send logs to syslog.
Default: pgbouncer (program name)
syslog_facility
Under what facility to send logs to syslog. Possibilities: auth, authpriv, daemon, user, local0-7
Default: daemon
log_connections
Log successful logins.
Default: 1
log_disconnections
Log disconnections with reasons.
Default: 1
log_pooler_errors
Log error messages pooler sends to clients.
Default: 1
stats_period
Period for writing aggregated stats into log.
Default: 60
Console access control
admin_users
Comma-separated list of database users that are allowed to connect and run all commands on console. Ignored when auth_mode=any, in
which case any username is allowed in as admin.
Default: empty
stats_users
Comma-separated list of database users that are allowed to connect and run read-only queries on console. Thats means all SHOW commands
except SHOW FDS.
Default: empty.
Connection sanity checks, timeouts
server_reset_query
Query sent to server on connection release, before making it available to other clients. At that moment no transaction is in progress
so it should not include ABORT or ROLLBACK.
A good choice for Postgres 8.2 and below is:
server_reset_query = RESET ALL; SET SESSION AUTHORIZATION DEFAULT;
for 8.3 and above its enough to do:
server_reset_query = DISCARD ALL;
When transaction pooling is used, the server_reset_query should be empty, as clients should not use any session features.
Default: DISCARD ALL
server_check_delay
How long to keep released connections available for immediate re-use, without running sanity-check queries on it. If 0 then the query
is ran always.
Default: 30
server_check_query
Simple do-nothing query to check if the server connection is alive.
If an empty string, then sanity checking is disabled.
Default: SELECT 1;
server_lifetime
The pooler will try to close server connections that have been connected longer than this. Setting it to 0 means the connection is to
be used only once, then closed. [seconds]
Default: 3600
server_idle_timeout
If a server connection has been idle more than this many seconds, and there are too many connections in the pool, this one can be
dropped. If 0 then timeout is disabled. [seconds]
Default: 600
server_connect_timeout
If connection and login won't finish in this amount of time, the connection will be closed. [seconds]
Default: 15
server_login_retry
If login failed, because of failure from connect() or authentication that pooler waits this much before retrying to connect. [seconds]
Default: 15
client_login_timeout
If a client connects but does not manage to login in this amount of time, it will be disconnected. Mainly needed to avoid dead
connections stalling SUSPEND and thus online restart. [seconds]
Default: 60
autodb_idle_timeout
If the automatically created (via "*") database pools have been unused this many seconds, they are freed. The negative aspect of that
is that their statistics are also forgotten. [seconds]
Default: 3600
dns_max_ttl
How long the DNS lookups can be cached. If a DNS lookup returns several answers, pgbouncer will robin-between them in the meantime.
Actual DNS TTL is ignored. [seconds]
Default: 15
dns_zone_check_period
Period to check if zone serial has changed.
PgBouncer can collect dns zones from hostnames (everything after first dot) and then periodically check if zone serial changes. If it
notices changes, all hostnames under that zone are looked up again. If any host ip changes, it's connections are invalidated.
Works only with UDNS backend (--with-udns to configure).
Default: 0 (disabled)
Dangerous timeouts
Setting following timeouts cause unexpected errors.
query_timeout
Queries running longer than that are canceled. This should be used only with slightly smaller server-side statement_timeout, to apply
only for network problems. [seconds]
Default: 0 (disabled)
query_wait_timeout
Maximum time queries are allowed to spend waiting for execution. If the query is not assigned to a server during that time, the client
is disconnected. This is used to prevent unresponsive servers from grabbing up connections. [seconds]
Default: 0 (disabled)
client_idle_timeout
Client connections idling longer than this many seconds are closed. This should be larger than the client-side connection lifetime
settings, and only used for network problems. [seconds]
Default: 0 (disabled)
idle_transaction_timeout
If client has been in "idle in transaction" state longer, it will be disconnected. [seconds]
Default: 0 (disabled)
Low-level network settings
pkt_buf
Internal buffer size for packets. Affects size of TCP packets sent and general memory usage. Actual libpq packets can be larger than
this so, no need to set it large.
Default: 2048
listen_backlog
Backlog argument for listen(2). Determines how many new unanswered connection attempts are kept in queue. When queue is full, further
new connections are dropped.
Default: 128
sbuf_loopcnt
How many times to process data on one connection, before proceeding. Without this limit, one connection with a big resultset can stall
PgBouncer for a long time. One loop processes one pkt_buf amount of data. 0 means no limit.
Default: 5
tcp_defer_accept
For details on this and other tcp options, please see man 7 tcp.
Default: 45 on Linux, otherwise 0
tcp_socket_buffer
Default: not set
tcp_keepalive
Turns on basic keepalive with OS defaults.
On Linux, the system defaults are tcp_keepidle=7200, tcp_keepintvl=75, tcp_keepcnt=9. They are probably similar on other OS-es.
Default: 1
tcp_keepcnt
Default: not set
tcp_keepidle
Default: not set
tcp_keepintvl
Default: not set
SECTION
[DATABASES]
This contains key=value pairs where key will be taken as a database name and value as a libpq connect-string style list of key=value pairs.
As actual libpq is not used, so not all features from libpq can be used (service=, .pgpass).
Database name can contain characters [0-9A-Za-z_.-] without quoting. Names that contain other chars need to be quoted with standard SQL
ident quoting: double quotes where "" is taken as single quote.
"*" acts as fallback database: if the exact name does not exist, its value is taken as connect string for requested database. Such
automatically created database entries are cleaned up if they stay idle longer then the time specified in autodb_idle_timeout parameter.
Location parameters
dbname
Destination database name.
Default: same as client-side database name.
host
Hostname or IP address to connect to. Hostnames are resolved on connect time, the result is cached per dns_max_ttl parameter. If DNS
returns several results, they are used in round-robin manner.
Default: not set, meaning to use a Unix socket.
port
Default: 5432
user, password
If user= is set, all connections to the destination database will be done with the specified user, meaning that there will be only one
pool for this database.
Otherwise PgBouncer tries to log into the destination database with client username, meaning that there will be one pool per user.
Pool configuration
pool_size
Set maximum size of pools for this database. If not set, the default_pool_size is used.
connect_query
Query to be executed after a connection is established, but before allowing the connection to be used by any clients. If the query
raises errors, they are logged but ignored otherwise.
Extra parameters
They allow setting default parameters on server connection.
Note that since version 1.1 PgBouncer tracks client changes for their values, so their use in pgbouncer.ini is deprecated now.
client_encoding
Ask specific client_encoding from server.
datestyle
Ask specific datestyle from server.
timezone
Ask specific timezone from server.
AUTHENTICATION FILE FORMAT
PgBouncer needs its own user database. The users are loaded from a text file in following format:
"username1" "password" ...
"username2" "md5abcdef012342345" ...
There should be at least 2 fields, surrounded by double quotes. The first field is the username and the second is either a plain-text or a
MD5-hidden password. PgBouncer ignores the rest of the line.
This file format is equivalent to text files used by PostgreSQL 8.x for authentication info, thus allowing PgBouncer to work directly on
PostgreSQL authentication files in data directory.
Since PostgreSQL 9.0, the text files are not used anymore. Thus the auth file needs to be generated. See ./etc/mkauth.py for sample script
to generate auth file from pg_shadow table.
PostgreSQL MD5-hidden password format:
"md5" + md5(password + username)
So user admin with password 1234 will have MD5-hidden password md545f2603610af569b6155c45067268c6b.
EXAMPLE
Minimal config
[databases]
template1 = host=127.0.0.1 dbname=template1
[pgbouncer]
pool_mode = session
listen_port = 6543
listen_addr = 127.0.0.1
auth_type = md5
auth_file = users.txt
logfile = pgbouncer.log
pidfile = pgbouncer.pid
admin_users = someuser
stats_users = stat_collector
Database defaults
[databases]
; foodb over unix socket
foodb =
; redirect bardb to bazdb on localhost
bardb = host=127.0.0.1 dbname=bazdb
; access to destination database will go with single user
forcedb = host=127.0.0.1 port=300 user=baz password=foo client_encoding=UNICODE datestyle=ISO
SEE ALSO
pgbouncer(1) - manpage for general usage, console commands.
http://wiki.postgresql.org/wiki/PgBouncer
11/02/2012 PGBOUNCER(5)