GAMMU-SMSDRC(5) Gammu GAMMU-SMSDRC(5)
NAME
gammu-smsdrc - gammu-smsd(1) configuration file
DESCRIPTION
gammu-smsd reads configuration from a config file. It's location can be specified on command line, otherwise default path /etc/gammu-smsdrc
is used.
This file use ini file syntax, see ini.
Configuration file of gammu-smsd consists of at least two sections - [gammu] and [smsd]. For gammu-smsd-sql you can also use [sql].
The [gammu] section is configuration of a phone connection and is same as described in gammurc with the only exception that LogFile is
ignored and common logging for gammu library and SMS daemon is used. However the LogFormat directive still configures how much messages
gammu emits.
[smsd] The [smsd] section configures SMS daemon itself, which are described in following subsections. First general parameters of SMS dae-
mon are listed and then specific parameters for storage backends.
[include_numbers]
List of numbers from which accept messages, see Message filtering.
[exclude_numbers]
List of numbers from which reject messages, see Message filtering.
[include_smsc]
List of SMSC numbers from which accept messages, see Message filtering.
[exclude_smsc]
List of SMSC numbers from which reject messages, see Message filtering.
[sql] Configure SQL queries used by gammu-smsd-sql, you usually don't have to modify them.
See also
Configurable queries
GENERAL PARAMETERS OF SMS DAEMON
Service
SMSD service to use, one of following choices:
FILES stores messages in files, see gammu-smsd-files for details
NULL does not store messages at all, see gammu-smsd-null for details
SQL stores messages in SQL database, see gammu-smsd-sql for details
New in version 1.28.93.
MYSQL synonym for Service = SQL and Driver = native_mysql
stores messages in MySQL database, see gammu-smsd-mysql for details
Deprecated since version 1.28.93.
PGSQL synonym for Service = SQL and Driver = native_pgsql
stores messages in PostgreSQL database, see gammu-smsd-pgsql for details
Deprecated since version 1.28.93.
DBI synonym for Service = SQL and Driver = DBI driver
stores messages in any database supported by libdbi, this includes MSSQL, MySQL, PostgreSQL or SQLite databases, see
gammu-smsd-dbi for details
Deprecated since version 1.28.93.
Note Availability of backends depends on platform and compile time configuration.
PIN PIN for SIM card. This is optional, but you should set it if your phone after power on requires PIN.
NetworkCode
Network personalisation password. This is optional, but some phones require it after power on.
PhoneCode
Phone lock password. This is optional, but some phones require it after power on.
LogFile
File where SMSD actions are being logged. You can also use special value syslog which will send all messages to syslog daemon. On
Windows another special value eventlog exists, which will send logs to Windows Event Log.
If you run SMSD as a system daemon (or service), it is recommended to use absolute path to log file as startup directory might be
different than you expect.
Default is to provide no logging.
Note For logging to Windows Event Log, it is recommended to install Event Log source by invoking gammu-smsd -e (this is automatically
done during installation of Gammu).
LogFacility
Facility to use on logging backends which support it (currently only syslog). One of following chouces:
o DAEMON (default)
o USER
o LOCAL0
o LOCAL1
o LOCAL2
o LOCAL3
o LOCAL4
o LOCAL5
o LOCAL6
o LOCAL7
New in version 1.30.91.
DebugLevel
Debug level for SMSD. The integer value should be sum of all flags you want to enable.
1 enables basic debugging information
2 enables logging of SQL queries of service backends
4 enables logging of gammu debug information
Generally to get as much debug information as possible, use 255.
Default is 0, what should mean no extra information.
CommTimeout
How many seconds should SMSD wait after there is no message in outbox.
Default is 30.
SendTimeout
Shows how many seconds SMSD should wait for network answer during sending sms. If nothing happen during this time, sms will be
resent.
Default is 30.
MaxRetries
How many times will SMSD try to resend message if sending fails.
Default is 1.
ReceiveFrequency
The number of seconds between testing for received SMSes, when the phone is busy sending SMSes. Normally a test for received SMSes
is done every CommTimeout seconds and after each sent SMS.
Default is 0 (not used).
StatusFrequency
The number of seconds between refreshing phone status (battery, signal) stored in shared memory and possibly in service backends.
Use 0 to disable.
Default is 15.
LoopSleep
The number of seconds how long will SMSD sleep before checking for some activity. Please note that setting this to higher value than
1 will have effects to other time based configurations, because they will be effectively rounded to multiply of this value.
Setting this to 0 disables sleeping. Please not this might cause Gammu to consume quite a lot of CPU power.
Default is 1.
MultipartTimeout
The number of seconds how long will SMSD wait for all parts of multipart message. If all parts won't arrive in time, parts will be
processed as separate messages.
Default is 600 (10 minutes).
CheckSecurity
Whether to check if phone wants to enter PIN.
Default is 1 (enabled).
CheckBattery
Whether to check phone battery state periodically.
Default is 1 (enabled).
CheckSignal
Whether to check signal level periodically.
Default is 1 (enabled).
ResetFrequency
The number of seconds between performing a preventive soft reset in order to minimize the cases of hanging phones e.g. Nokia 5110
will sometimes freeze to a state when only after unmounting the battery the phone will be functional again.
Default is 0 (not used).
HardResetFrequency
New in version 1.28.92.
Warning
For some phones hard reset means deleting all data in it. Use ResetFrequency, unless you know what you are doing.
The number of seconds between performing a preventive hard reset in order to minimize the cases of hanging phones.
Default is 0 (not used).
DeliveryReport
Whether delivery reports should be used, one of no, log, sms.
log one line log entry,
sms store in inbox as a received SMS
no no delivery reports
Default is no.
DeliveryReportDelay
Delay in seconds how long is still delivery report considered valid. This depends on brokeness of your network (delivery report
should have same timestamp as sent message). Increase this if delivery reports are not paired with sent messages.
Default is 600 (10 minutes).
PhoneID
String with info about phone used for sending/receiving. This can be useful if you want to run several SMS daemons.
When you set PhoneID, all messages (including injected ones) will be marked by this string (stored as SenderID in the database) and
it allows more SMS daemons to share a single database.
This option has actually no effect with gammu-smsd-files.
RunOnReceive
Executes a program after receiving message.
This parameter is executed through shell, so you might need to escape some special characters and you can include any number of
parameters. Additionally parameters with identifiers of received messages are appended to the command line. The identifiers depend
on used service backend, typically it is ID of inserted row for database backends or file name for file based backends.
Gammu SMSD waits for the script to terminate. If you make some time consuming there, it will make SMSD not receive new messages.
However to limit breakage from this situation, the waiting time is limited to two minutes. After this time SMSD will continue in
normal operation and might execute your script again.
The process has available lot of information about received message in environment, check gammu-smsd-run for more details.
RunOnFailure
New in version 1.28.93.
Executes a program on failure.
This can be used to proactively react on some failures or to interactively detect failure of sending message.
The program will receive optional parameter, which can currently be either INIT (meaning failure during phone initialization) or
message ID, which would indicate error while sending the message.
Note The environment with message (as is in RunOnReceive) is not passed to the command.
IncludeNumbersFile
File with list of numbers which are accepted by SMSD. The file contains one number per line, blank lines are ignored. The file is
read at startup and is reread only when configuration is being reread. See Message filtering for details.
ExcludeNumbersFile
File with list of numbers which are not accepted by SMSD. The file contains one number per line, blank lines are ignored. The file
is read at startup and is reread only when configuration is being reread. See Message filtering for details.
IncludeSMSCFile
File with list of SMSC numbers which are accepted by SMSD. The file contains one number per line, blank lines are ignored. The file
is read at startup and is reread only when configuration is being reread. See Message filtering for details.
ExcludeSMSCFile
File with list of SMSC numbers which are not accepted by SMSD. The file contains one number per line, blank lines are ignored. The
file is read at startup and is reread only when configuration is being reread. See Message filtering for details.
BackendRetries
How many times will SMSD backend retry operation.
The implementation on different backends is different, for database backends it generally means how many times it will try to recon-
nect to the server.
Default is 10.
Send New in version 1.28.91.
Whether to enable sending of messages.
Default is True.
Receive
New in version 1.28.91.
Whether to enable receiving of messages.
Default is True.
DATABASE BACKENDS OPTIONS
All DBI, ODBC, MYSQL and PGSQL backends (see gammu-smsd-mysql, gammu-smsd-odbc, gammu-smsd-pgsql, gammu-smsd-dbi for their documentation)
supports same options for configuring connection to a database:
User User name used for connection to a database.
Password
Password used for connection to a database.
Host Database server address. It can also contain port or socket path after semicolon, for example localhost:/path/to/socket or
192.168.1.1:8000.
For ODBC this is used as Data source name.
Note Some database servers differentiate usage of localhost (to use local socket) and 127.0.0.1 (to use locat TCP/IP connection). Please
make sure your SMSD settings match the database server ones.
New in version 1.28.92.
PC Synonym for Host.
Deprecated since version 1.28.92.
Database
Name of database to use. Please note that you should create tables in this database before using gammu-smsd. SQL files for creating
needed tables are included in documentation.
SkipSMSCNumber
When you send sms from some SMS centere you can have delivery reports from other SMSC number. You can set here number of this SMSC
used by you and Gammu will not check it's number during assigning reports to sent SMS.
Driver SQL driver to use.
Can be either one of native drivers (odbc, native_mysql or native_pgsql) or gammu-smsd-dbi driver.
Depends on what DBI drivers you have installed, DBI supports: mysql, freetds (provides access to MS SQL Server and Sybase), pgsql,
sqlite, sqlite3, firebird and ingres, msql and oracle drivers are under development.
SQL SQL dialect to use. This is specially useful with gammu-smsd-odbc where SMSD does not know which server it is actually talking to.
Possible values:
o mysql - MySQL
o pgsql - PostgreSQL
o sqlite - SQLite
o mssql - Microsoft SQL Server
o sybase - Sybase
o access - Microsoft Access
o odbc - Generic ODBC
New in version 1.28.93.
See also
You can also completely customize SQL queries used as described in SQL Queries.
DriversPath
Path, where DBI drivers are stored, this usually does not have to be set if you have properly installed drivers.
DBDir Database directory for some (currently only sqlite) DBI drivers. Set here path where sqlite database files are stored.
Files backend options
The FILES backend accepts following configuration options. See gammu-smsd-files for more detailed service backend description. Please note
that all path should contain trailing path separator (/ on Unix systems):
InboxPath
Where the received SMSes are stored.
Default is current directory.
OutboxPath
Where SMSes to be sent should be placed.
Default is current directory.
SentSMSPath
Where the transmitted SMSes are placed, if same as OutboxPath transmitted messages are deleted.
Default is to delete transmitted messages.
ErrorSMSPath
Where SMSes with error in transmission is placed.
Default is same as SentSMSPath.
InboxFormat
The format in which the SMS will be stored: detail, unicode, standard.
detail format used for message backup by gammu, see gammu-smsbackup.
unicode
message text stored in unicode (UTF-16)
standard
message text stored in system charset
The standard and unicode settings do not apply for 8-bit messages, which are always written raw as they are received with extension
.bin.
Default is unicode.
Note In detail format, all message parts are stored into signle file, for all others each message part is saved separately.
OutboxFormat
The format in which messages created by gammu-smsd-inject will be stored, it accepts same values as InboxFormat.
Default is detail if Gammu is compiled in with backup functions, unicode otherwise.
TransmitFormat
The format for transmitting the SMS: auto, unicode, 7bit.
Default is auto.
MESSAGE FILTERING
SMSD allows one to process only limited subset of incoming messages. You can define filters for sender number in [include_numbers] and
[exclude_numbers] sections or using IncludeNumbersFile and ExcludeNumbersFile directives.
If [include_numbers] section exists, all values (keys are ignored) from it are used as allowed phone numbers and no other message is pro-
cessed. On the other side, in [exclude_numbers] you can specify numbers which you want to skip.
Lists from both sources are merged together. If there is any number in include list, only include list is used and only messages in this
list are being accepted. If include list is empty, exclude list can be used to ignore messages from some numbers. If both lists are empty,
all messages are accepted.
Similar filtering rules can be used for SMSC number filtering, they just use different set of configuration options - [include_smsc] and
[exclude_smsc] sections or IncludeSMSCFile and ExcludeSMSCFile directives.
EXAMPLES
There is more complete example available in Gammu documentation. Please note that for simplicity following examples do not include [gammu]
section, you can look into gammurc for some examples how it can look like.
Files service
SMSD configuration file for FILES backend could look like:
[smsd]
Service = files
PIN = 1234
LogFile = syslog
InboxPath = /var/spool/sms/inbox/
OutboPpath = /var/spool/sms/outbox/
SentSMSPath = /var/spool/sms/sent/
ErrorSMSPath = /var/spool/sms/error/
MySQL service
If you want to use MYSQL backend, you will need something like this:
[smsd]
Service = sql
Driver = native_mysql
PIN = 1234
LogFile = syslog
User = smsd
Password = smsd
PC = localhost
Database = smsd
DBI service using SQLite
For gammu-smsd-dbi backend, in this particular case SQLite:
[smsd]
Service = sql
Driver = sqlite3
DBDir = /var/lib/sqlite3
Database = smsd.db
ODBC service using MySQL
For gammu-smsd-odbc backend, in this particular case using DSN smsd server:
[smsd]
Service = sql
Driver = odbc
Host = smsd
The DSN definition (in ~/.odbc.ini on UNIX) for using MySQL server would look like:
[smsd]
Description = MySQL
Driver = MySQL
Server = 127.0.0.1
Database = smsd
Port =
Socket =
Option =
Stmt =
[smsdsuse]
Driver = MySQL ODBC 3.51.27r695 Driver
DATABASE = smsd
SERVER = 127.0.0.1
Numbers filtering
Process only messages from 123456 number:
[include_numbers]
number1 = 123456
Do not process messages from evil number 666:
[exclude_numbers]
number1 = 666
Debugging
Enabling debugging:
[smsd]
debuglevel = 255
logfile = smsd.log
AUTHOR
Michal iha <michal@cihar.com>
COPYRIGHT
2009-2012, Michal iha <michal@cihar.com>
1.31.90 February 24, 2012 GAMMU-SMSDRC(5)