XML::Easy::Syntax(3pm) User Contributed Perl Documentation XML::Easy::Syntax(3pm)
NAME
XML::Easy::Syntax - excruciatingly correct XML syntax
SYNOPSIS
use XML::Easy::Syntax qw($xml10_name_rx);
if($name =~ /A$xml10_name_rxz/o) { ...
# and many other regular expressions
DESCRIPTION
This module supplies Perl regular expressions describing the grammar of XML 1.0. This is intended to support doing irregular things with
XML, rather than for normal parsing.
These regular expressions encompass the entire XML grammar except for document type declarations and DTDs. This document assumes general
familiarity with XML.
REGULAR EXPRESSIONS
Each of these regular expressions corresponds precisely to one of the productions in the EBNF grammar in the XML 1.0 specification. Well-
formedness constraints that are not expressed in the EBNF are not checked by the regular expressions; these are noted in the documentation
below. The regular expressions do not include any anchors, so to check whether an entire string matches a production you must supply the
anchors yourself.
Syntax pieces
$xml10_char_rx
Any single character that is acceptable to XML 1.0. This includes most Unicode characters (up to codepoint 0x10ffff). The excluded
codepoints are the sentinels 0xfffe and 0xffff, the surrogate blocks, and most of the C0 control characters (0x00 to 0x1f, except for
0x09 (tab), 0x0a (linefeed/newline), and 0x0d (carriage return)).
It is a rule of XML that all characters making up an XML document must be in this permitted set. The grammar productions can only
match sequences of acceptable characters. This rule is enforced by the regular expressions in this module.
Furthermore, it is a rule that the character data in a document cannot even represent a character outside the permitted set. This is
expressed as a well-formedness constraint on character references.
$xml10_s_rx
Any sequence of one or more acceptable whitespace characters. The whitespace characters, for this purpose, are tab, linefeed/newline,
carriage return, and space. Non-ASCII whitespace characters, and the more exotic ASCII whitespace characters, do not qualify.
$xml10_eq_rx
Equals sign, surrounded by optional whitespace.
Names
$xml10_namestartchar_rx
Any single character that is permitted at the start of a name. The permitted characters are "_", ":", and letters (categorised
according to Unicode 2.0).
This production is not named in the XML specification.
$xml10_namechar_rx
Any single character that is permitted in a name other than at the start. The permitted characters are ".", "-", "_", ":", and
letters, digits, combining characters, and extenders (categorised according to Unicode 2.0).
$xml10_name_rx
A name, of the type used to identify element types, attributes, entities, and other things in XML.
$xml10_names_rx
A space-separated list of one or more names.
$xml10_nmtoken_rx
A name-like token, much like a name except that the first character is no more restricted than the remaining characters. These tokens
play no part in basic XML syntax, and in the specification are only used as part of attribute typing.
$xml10_nmtokens_rx
A space-separated list of one or more name-like tokens.
References
$xml10_charref_rx
A numeric character reference (beginning with "&#" and ending with ";"). There is a non-syntactic well-formedness constraint: the
codepoint is required to be within the Unicode range and to refer to an acceptable character (as discussed at $xml10_char_rx).
$xml10_entityref_rx
A general entity reference (beginning with "&" and ending with ";"). There are non-syntactic well-formedness constraints: the
referenced entity must be declared (possibly implicitly), must not be an unparsed entity, must not contain a recursive reference to
itself, and its replacement text must itself be well-formed.
$xml10_reference_rx
Either a character reference or an entity reference. The well-formedness constraints of both reference types (see above) apply.
Character data
$xml10_chardata_rx
Ordinary literal character data. This consists of zero or more acceptable charaters, other than the metacharacters "<" and "&", and
not including "]]>" as a subsequence. Such data stands for itself when it appears between the start and end tags of an element, where
it can be interspersed with references, CDATA sections, comments, and processing instructions.
In the XML grammar, character data is parsed, and taken literally, after line endings have been canonicalised (to the newline
character). Pre-canonicalisation character data, with variable line endings, will still match this production but should not be
interpreted literally.
Beware that a string that does not match this production might parse as two adjacent strings each of which matches. This can happen
because of the prohibition on "]]>" being embedded in character data, while the characters of that sequence are acceptable
individually. The XML grammar does not allow two instances of this production to abut.
$xml10_cdata_rx
Literal character data in a CDATA section. This consists of zero or more acceptable charaters, not including "]]>" as a subsequence.
Unlike ordinary literal character data, the characters "<" and "&" are not metacharacters here. Such data stands for itself when it
appears within a CDATA section.
As with ordinary literal character data (see above), this data is meant to be taken literally only after line endings have been
canonicalised. Also, as with ordinary literal character data, two instances of this production should not abut.
$xml10_cdstart_rx
$xml10_cdend_rx
The fixed strings "<![CDATA[" and "]]>" which begin and finish a CDATA section.
$xml10_cdsect_rx
A CDATA section. This consists of "<![CDATA[", literal character data with metacharacters disabled, and "]]>".
Tags
$xml10_attvalue_rx
A quoted attribute value. This consists of acceptable characters other than "<", "&", and the quote character, interspersed with
references, surrounded by matching """ or "'" quotes. The well-formedness constraints of references apply, and additionally the
replacement text of any referenced entities must not contain any "<" characters, and it is not permitted to refer to external entities.
$xml10_attribute_rx
A complete attribute, consisting of name, equals sign, and quoted value. The well-formedness constraints of attribute values
(pertaining to references) apply.
$xml10_stag_rx
A start-tag, used to begin an element. This consists of "<", the element type name, whitespace-separated list of attributes, and ">".
The well-formedness constraints of attribute values (pertaining to references) apply. There is also a well-formedness constraint that
attribute names must be unique within the tag.
$xml10_etag_rx
An end-tag, used to finish an element. This consists of "</", the element type name, and ">".
$xml10_emptyelemtag_rx
An empty-element tag, used to represent an element with no content. This consists of "<", the element type name, whitespace-separated
list of attributes, and "/>". The well-formedness constraints of attribute values (pertaining to references) apply. There is also a
well-formedness constraint that attribute names must be unique within the tag. (These are the same constraints as for start-tags.)
Non-data content
$xml10_comment_rx
A comment. This does not contribute to the data content of an XML document. It consists of "<!--", zero or more acceptable
characters, and "-->". It is not permitted for the content to include "--" as a subsequence, nor for it to end with "-".
$xml10_pitarget_rx
A processing instruction target name. This can be any name (the $xml10_name_rx production) except for "xml" and its case variations.
$xml10_pi_rx
A processing instruction. This consists of "<?", a target name, some content which can be almost any sequence of acceptable
characters, and "?>". A processing instruction does not contribute to the data content of an XML document, but is intended to carry
metadata regarding how to process it. The instruction is addressed to a particular XML processor, or type of processor, identified by
the target name, and the content of the instruction is expected to be meaningful only to its target.
No one has ever come up with a good use for processing instructions. They are best shunned.
Recursive structure
$xml10_content_rx
The matter contained within an element (between its start-tag and end-tag). This consists of stretches of ordinary literal character
data, interspersed with complete elements (recursively), references, CDATA sections, processing instructions, and comments, in any
order. The well-formedness constraints of references and elements apply.
$xml10_element_rx
A complete element. This is either an empty-element tag, or a sequence of start-tag, content, and end-tag. The well-formedness
constraints regarding references and attribute uniqueness apply in the empty-element tag or start-tag. In the non-empty form, the
content also has well-formedness constraints regarding references and (recursively) contained elements, and there is an additional
constraint that the element type name in the end-tag must match that in the start-tag.
XML declarations
$xml10_versionnum_rx
The version number of the XML specification. This is the fixed string "1.0".
$xml10_versioninfo_rx
The version declaration part of an XML declaration.
$xml10_encname_rx
A character encoding name. This must start with an ASCII letter, and contain only ASCII letters and digits and ".", "_", and "-".
$xml10_encodingdecl_rx
The encoding declaration part of an XML declaration.
$xml10_sddecl_rx
The standaloneness declaration part of an XML declaration. This indicates whether the XML document can be correctly interpreted
without examining the external part of the DTD.
$xml10_xmldecl_rx
An XML declaration, as used at the start of an XML document. This consists of "<?xml", mandatory version declaration, optional
encoding declaration, optional standaloneness declaration, and "?>".
$xml10_textdecl_rx
A text declaration, as used at the start of an XML external parsed entity or external DTD. This consists of "<?xml", optional version
declaration, mandatory encoding declaration, and "?>". This is very similar to an XML declaration, but technically a different item
and used in different situations. It is possible, and useful, to construct a declaration which is acceptable both as an XML
declaration and as a text declaration.
Document structure
$xml10_misc_rx
Non-content item permitted in the prologue and epilogue of a document. This is either a comment, a processing instruction, or a
stretch of whitespace.
Beware in using a pattern such as "$xml10_misc_rx*". It could match a string of whitespace charaters in many ways, leading to
exponential behaviour if it becomes necessary to backtrack. This can be avoided by using the $xml10_miscseq_rx pattern (below).
$xml10_miscseq_rx
A sequence (possibly empty) of non-content matter permitted in the prologue and epilogue of a document. This can contain comments,
processing instructions, and whitespace, in any order.
This production is not named in the XML specification. This regular expression should be preferred over "$xml10_misc_rx*" (which is
the direct translation of what appears in the XML specification), because this one guarantees to match a particular text in only one
way, and is thus able to backtrack cleanly.
$xml10_prolog_xdtd_rx
Document prologue, except for not permitting a document type declaration. This consists of an optional XML declaration followed by any
sequence of comments, processing instructions, and whitespace.
$xml10_document_xdtd_rx
A complete XML document, except for not permitting a document type declaration. This consists of a non-content prologue, an element
(the root element, which can recursively contain other elements), and a non-content epilogue. The well-formedness constraints of
elements apply to the root element.
$xml10_extparsedent_rx
A complete external parsed entity. This consists of an optional text declaration followed by a sequence of content of the same type
that is permitted within an element. The well-formedness constraints of element content apply.
BUGS
Many of these regular expressions are liable to tickle a serious bug in perl's regexp engine. The bug is that the "*" and "+" repeat
operators don't always match an unlimited number of repeats: in some cases they are limited to 32767 iterations. Whether this bogus limit
applies depends on the complexity of the expression being repeated, whether the string being examined is internally encoded in UTF-8, and
the version of perl. In some cases, but not all, a false match failure is preceded by a warning "Complex regular subexpression recursion
limit(32766) exceeded".
This bug is present, in various forms, in all perl versions up to at least 5.8.9 and 5.10.0. Pre-5.10 perls may also overflow their stack
space, in similar circumstances, if a resource limit is imposed.
There is no known feasible workaround for this perl bug. The regular expressions supplied by this module will therefore, unavoidably, fail
to accept some lengthy valid inputs. Where this occurs, though, it is likely that other regular expressions being applied to the same or
related input will also suffer the same problem. It is pervasive. Do not rely on this module (or perl) to process long inputs on affected
perl versions.
This bug does not affect the XML::Easy::Text parser.
SEE ALSO
XML::Easy::Text, http://www.w3.org/TR/REC-xml/ <http://www.w3.org/TR/REC-xml/>
AUTHOR
Andrew Main (Zefram) <zefram@fysh.org>
COPYRIGHT
Copyright (C) 2008, 2009 PhotoBox Ltd
Copyright (C) 2009, 2010, 2011 Andrew Main (Zefram) <zefram@fysh.org>
LICENSE
This module is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
perl v5.14.2 2011-11-16 XML::Easy::Syntax(3pm)