config::model::models::lcdd::imonlcd(3pm) [debian man page]

Config::Model::models::LCDd::imonlcd(3pm)		User Contributed Perl Documentation		 Config::Model::models::LCDd::imonlcd(3pm)

NAME

       Config::Model::models::LCDd::imonlcd - Configuration class LCDd::imonlcd

VERSION

       version 2.021

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements
   Protocol
       Specify which iMon protocol should be used

       Choose 0 for 15c2:ffdc device, Choose 1 for 15c2:0038 device. Optional. Type enum. choice: '0', '1'. upstream_default: '0'.

   OnExit
       Set the exit behavior 0 means leave shutdown message, 1 means show the big clock, 2 means blank device. Optional. Type integer.
       upstream_default: '1'.

   Device
       Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd0'.

   Contrast
       Select the displays contrast Optional. Type integer. upstream_default: '200'.

   Size
       Specify the size of the display in pixels Optional. Type uniline. upstream_default: '96x16'.

   Backlight
       Set the backlight state Optional. Type enum. choice: 'on', 'off'. upstream_default: 'on'.

   DiscMode
       Set the disc mode 0 => spin the "slim" disc - two disc segments, 1 => their complement spinning;Optional. Type enum. choice: '0', '1'.
       upstream_default: '0'.

SEE ALSO

       o   cme

perl v5.14.2							    2012-11-09				 Config::Model::models::LCDd::imonlcd(3pm)

Config::Model::models::LCDd::CFontz(3pm)		User Contributed Perl Documentation		  Config::Model::models::LCDd::CFontz(3pm)

NAME

       Config::Model::models::LCDd::CFontz - Configuration class LCDd::CFontz

VERSION

       version 2.021

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements
   Device
       Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.

   Size
       Select the LCD size Optional. Type uniline. upstream_default: '20x4'.

   Contrast
       Set the initial contrast Optional. Type integer. upstream_default: '560'.

   Brightness
       Set the initial brightness Optional. Type integer. upstream_default: '1000'.

   OffBrightness
       Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type
       integer. upstream_default: '0'.

   Speed
       Set the communication speed Optional. Type enum. choice: '1200', '2400', '9600', '19200', '115200'. upstream_default: '9600'.

   NewFirmware
       Set the firmware version (New means >= 2.0) Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.

   Reboot
       Reinitialize the LCD's BIOS normally you shouldn't need this. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.

SEE ALSO

       o   cme

perl v5.14.2							    2012-11-09				  Config::Model::models::LCDd::CFontz(3pm)