slarre.f(3) LAPACK slarre.f(3)
NAME
slarre.f -
SYNOPSIS
Functions/Subroutines
subroutine slarre (RANGE, N, VL, VU, IL, IU, D, E, E2, RTOL1, RTOL2, SPLTOL, NSPLIT, ISPLIT, M, W, WERR, WGAP, IBLOCK, INDEXW, GERS,
PIVMIN, WORK, IWORK, INFO)
SLARRE
Function/Subroutine Documentation
subroutine slarre (characterRANGE, integerN, realVL, realVU, integerIL, integerIU, real, dimension( * )D, real, dimension( * )E, real,
dimension( * )E2, realRTOL1, realRTOL2, realSPLTOL, integerNSPLIT, integer, dimension( * )ISPLIT, integerM, real, dimension( * )W, real,
dimension( * )WERR, real, dimension( * )WGAP, integer, dimension( * )IBLOCK, integer, dimension( * )INDEXW, real, dimension( * )GERS,
realPIVMIN, real, dimension( * )WORK, integer, dimension( * )IWORK, integerINFO)
SLARRE
Purpose:
To find the desired eigenvalues of a given real symmetric
tridiagonal matrix T, SLARRE sets any "small" off-diagonal
elements to zero, and for each unreduced block T_i, it finds
(a) a suitable shift at one end of the block's spectrum,
(b) the base representation, T_i - sigma_i I = L_i D_i L_i^T, and
(c) eigenvalues of each L_i D_i L_i^T.
The representations and eigenvalues found are then used by
SSTEMR to compute the eigenvectors of T.
The accuracy varies depending on whether bisection is used to
find a few eigenvalues or the dqds algorithm (subroutine SLASQ2) to
conpute all and then discard any unwanted one.
As an added benefit, SLARRE also outputs the n
Gerschgorin intervals for the matrices L_i D_i L_i^T.
Parameters:
RANGE
RANGE is CHARACTER*1
= 'A': ("All") all eigenvalues will be found.
= 'V': ("Value") all eigenvalues in the half-open interval
(VL, VU] will be found.
= 'I': ("Index") the IL-th through IU-th eigenvalues (of the
entire matrix) will be found.
N
N is INTEGER
The order of the matrix. N > 0.
VL
VL is REAL
VU
VU is REAL
If RANGE='V', the lower and upper bounds for the eigenvalues.
Eigenvalues less than or equal to VL, or greater than VU,
will not be returned. VL < VU.
If RANGE='I' or ='A', SLARRE computes bounds on the desired
part of the spectrum.
IL
IL is INTEGER
IU
IU is INTEGER
If RANGE='I', the indices (in ascending order) of the
smallest and largest eigenvalues to be returned.
1 <= IL <= IU <= N.
D
D is REAL array, dimension (N)
On entry, the N diagonal elements of the tridiagonal
matrix T.
On exit, the N diagonal elements of the diagonal
matrices D_i.
E
E is REAL array, dimension (N)
On entry, the first (N-1) entries contain the subdiagonal
elements of the tridiagonal matrix T; E(N) need not be set.
On exit, E contains the subdiagonal elements of the unit
bidiagonal matrices L_i. The entries E( ISPLIT( I ) ),
1 <= I <= NSPLIT, contain the base points sigma_i on output.
E2
E2 is REAL array, dimension (N)
On entry, the first (N-1) entries contain the SQUARES of the
subdiagonal elements of the tridiagonal matrix T;
E2(N) need not be set.
On exit, the entries E2( ISPLIT( I ) ),
1 <= I <= NSPLIT, have been set to zero
RTOL1
RTOL1 is REAL
RTOL2
RTOL2 is REAL
Parameters for bisection.
An interval [LEFT,RIGHT] has converged if
RIGHT-LEFT.LT.MAX( RTOL1*GAP, RTOL2*MAX(|LEFT|,|RIGHT|) )
SPLTOL
SPLTOL is REAL
The threshold for splitting.
NSPLIT
NSPLIT is INTEGER
The number of blocks T splits into. 1 <= NSPLIT <= N.
ISPLIT
ISPLIT is INTEGER array, dimension (N)
The splitting points, at which T breaks up into blocks.
The first block consists of rows/columns 1 to ISPLIT(1),
the second of rows/columns ISPLIT(1)+1 through ISPLIT(2),
etc., and the NSPLIT-th consists of rows/columns
ISPLIT(NSPLIT-1)+1 through ISPLIT(NSPLIT)=N.
M
M is INTEGER
The total number of eigenvalues (of all L_i D_i L_i^T)
found.
W
W is REAL array, dimension (N)
The first M elements contain the eigenvalues. The
eigenvalues of each of the blocks, L_i D_i L_i^T, are
sorted in ascending order ( SLARRE may use the
remaining N-M elements as workspace).
WERR
WERR is REAL array, dimension (N)
The error bound on the corresponding eigenvalue in W.
WGAP
WGAP is REAL array, dimension (N)
The separation from the right neighbor eigenvalue in W.
The gap is only with respect to the eigenvalues of the same block
as each block has its own representation tree.
Exception: at the right end of a block we store the left gap
IBLOCK
IBLOCK is INTEGER array, dimension (N)
The indices of the blocks (submatrices) associated with the
corresponding eigenvalues in W; IBLOCK(i)=1 if eigenvalue
W(i) belongs to the first block from the top, =2 if W(i)
belongs to the second block, etc.
INDEXW
INDEXW is INTEGER array, dimension (N)
The indices of the eigenvalues within each block (submatrix);
for example, INDEXW(i)= 10 and IBLOCK(i)=2 imply that the
i-th eigenvalue W(i) is the 10-th eigenvalue in block 2
GERS
GERS is REAL array, dimension (2*N)
The N Gerschgorin intervals (the i-th Gerschgorin interval
is (GERS(2*i-1), GERS(2*i)).
PIVMIN
PIVMIN is REAL
The minimum pivot in the Sturm sequence for T.
WORK
WORK is REAL array, dimension (6*N)
Workspace.
IWORK
IWORK is INTEGER array, dimension (5*N)
Workspace.
INFO
INFO is INTEGER
= 0: successful exit
> 0: A problem occured in SLARRE.
< 0: One of the called subroutines signaled an internal problem.
Needs inspection of the corresponding parameter IINFO
for further information.
=-1: Problem in SLARRD.
= 2: No base representation could be found in MAXTRY iterations.
Increasing MAXTRY and recompilation might be a remedy.
=-3: Problem in SLARRB when computing the refined root
representation for SLASQ2.
=-4: Problem in SLARRB when preforming bisection on the
desired part of the spectrum.
=-5: Problem in SLASQ2.
=-6: Problem in SLASQ2.
Author:
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Date:
November 2011
Further Details:
The base representations are required to suffer very little
element growth and consequently define all their eigenvalues to
high relative accuracy.
Contributors:
Beresford Parlett, University of California, Berkeley, USA
Jim Demmel, University of California, Berkeley, USA
Inderjit Dhillon, University of Texas, Austin, USA
Osni Marques, LBNL/NERSC, USA
Christof Voemel, University of California, Berkeley, USA
Definition at line 295 of file slarre.f.
Author
Generated automatically by Doxygen for LAPACK from the source code.
Version 3.4.1 Sun May 26 2013 slarre.f(3)