QCONF(1) Sun Grid Engine User Commands QCONF(1)
NAME
qconf - Sun Grid Engine Queue Configuration
SYNTAX
qconf options
DESCRIPTION
Qconf allows the system administrator to add, delete, and modify the current Sun Grid Engine configuration, including queue management,
host management, complex management and user management. Qconf also allows you to examine the current queue configuration for existing
queues.
Qconf allows the use of the backslash, '', character at the end of a line to indicate that the next line is a continuation of the current
line. When displaying settings, such as the output of one of the -s* options, qconf will break up long lines (lines greater than 80 char-
acters) into smaller lines using backslash line continuation where possible. Lines will only be broken up at commas or whitespace. This
feature can be disabled by setting the SGE_SINGLE_LINE environment variable.
OPTIONS
Unless denoted otherwise, the following options and the corresponding operations are available to all users with a valid account.
-Aattr obj_spec fname obj_instance,...
<add to object attributes>
Similar to -aattr (see below) but takes specifications for the object attributes to be enhanced from file named fname. As opposed to
-aattr, multiple attributes can be enhanced. Their specification has to be enlisted in fname following the file format of the corre-
sponding object (see queue_conf(5) for the queue, for example).
Requires root/manager privileges.
-Acal fname <add calendar>
Adds a new calendar definition to the Sun Grid Engine environment. Calendars are used in Sun Grid Engine for defining availability
and unavailability schedules of queues. The format of a calendar definition is described in calendar_conf(5).
The calendar definition is taken from the file fname. Requires root/ manager privileges.
-Ackpt fname <add ckpt. environment>
Add the checkpointing environment as defined in fname (see checkpoint(5)) to the list of supported checkpointing environments.
Requires root or manager privileges.
-Aconf file_list <add configurations>
Add the configurations (see sge_conf(5)) specified in the files enlisted in the comma separated file_list. The configuration is
added for the host that is identical to the file name.
Requires root or manager privileges.
-Ae fname <add execution host>
Add the execution host defined in fname to the Sun Grid Engine cluster. The format of the execution host specification is described
in host_conf(5). Requires root or manager privileges.
-Ahgrp file <add host group config>
Add the host group configuration defined in file. The file format of file must comply to the format specified in hostgroup(5).
Requires root or manager privileges.
-Arqs fname <add RQS configuration>
Add the resource quota set (RQS) defined in the file named fname to the Sun Grid Engine cluster. Requires root or manager privi-
leges.
-Ap fname <add PE configuration>
Add the parallel environment (PE) defined in fname to the Sun Grid Engine cluster. Requires root or manager privileges.
-Aprj fname <add new project>
Adds the project description defined in fname to the list of registered projects (see project(5)). Requires root or manager privi-
leges.
-Aq fname <add new queue>
Add the queue defined in fname to the Sun Grid Engine cluster. Requires root or manager privileges.
-Au fname <add an ACL>
Add the user access list (ACL) defined in fname to Sun Grid Engine. User lists are used for queue usage authentication. Requires
root/manager/operator privileges.
-cb This parameter can be used since Sun Grid Engine version 6.2u5 in combination with the command line switch -sep. In that case the
output of the corresponding command will contain information about the added job to core binding functionality.
If -cb switch is not used then -sep will behave as in GE version 6.2u4 and below.
Please note that this command-line switch will be removed from Sun Grid Engine with the next major release.
-Dattr obj_spec fname obj_instance,...
<del. from object attribs>
Similar to -dattr (see below) but the definition of the list attributes from which entries are to be deleted is contained in the
file named fname. As opposed to -dattr, multiple attributes can be modified. Their specification has to be enlisted in fname follow-
ing the file format of the corresponding object (see queue_conf(5) for the queue, for example).
Requires root/manager privileges.
-Mattr obj_spec fname obj_instance,...
<mod. object attributes>
Similar to -mattr (see below) but takes specifications for the object attributes to be modified from file named fname. As opposed to
-mattr, multiple attributes can be modified. Their specification has to be enlisted in fname following the file format of the corre-
sponding object (see queue_conf(5) for the queue, for example).
Requires root/manager privileges.
-Mc fname <modify complex>
Overwrites the complex configuration by the contents of fname. The argument file must comply to the format specified in complex(5).
Requires root or manager privilege.
-Mcal fname <modify calendar>
Overwrites the calendar definition as specified in fname. The argument file must comply to the format described in calendar_conf(5).
Requires root or manager privilege.
-Mckpt fname <modify ckpt. environment>
Overwrite an existing checkpointing environment with the definitions in fname (see checkpoint(5)). The name attribute in fname has
to match an existing checkpointing environment. Requires root or manager privileges.
-Mconf file_list <modify configurations>
Modify the configurations (see sge_conf(5)) specified in the files enlisted in the comma separated file_list. The configuration is
modified for the host that is identical to the file name.
Requires root or manager privileges.
-Me fname <modify execution host>
Overwrites the execution host configuration for the specified host with the contents of fname, which must comply to the format
defines in host_conf(5). Requires root or manager privilege.
-Mhgrp file <modify host group config.>
Allows changing of host group configuration with a single command. All host group configuration entries contained in file will be
applied. Configuration entries not contained in file will be deleted. The file format of file must comply to the format specified in
hostgroup(5).
-Mrqs fname [mrqs_name] <modify RQS configuration>
Same as -mrqs (see below) but instead of invoking an editor to modify the RQS configuration, the file fname is considered to contain
a changed configuration. The name of the rule set in fname must be the same as rqs_name. If rqs_name is not set, all rule sets are
overwritten by the rule sets in fname Refer to sge_resource_quota(5) for details on the RQS configuration format. Requires root or
manager privilege.
-Mp fname <modify PE configuration>
Same as -mp (see below) but instead of invoking an editor to modify the PE configuration the file fname is considered to contain a
changed configuration. Refer to sge_pe(5) for details on the PE configuration format. Requires root or manager privilege.
-Mprj fname <modify project config.>
Same as -mprj (see below) but instead of invoking an editor to modify the project configuration the file fname is considered to con-
tain a changed configuration. Refer to project(5) for details on the project configuration format. Requires root or manager privi-
lege.
-Mq fname <modify queue configuration>
Same as -mq (see below) but instead of invoking an editor to modify the queue configuration the file fname is considered to contain
a changed configuration. Refer to queue_conf(5) for details on the queue configuration format. Requires root or manager privilege.
-Msconf fname <modify scheduler configuration from file>
The current scheduler configuration (see sched_conf(5)) is overridden with the configuration specified in the file. Requires root
or manager privilege.
-Mstree fname <modify share tree>
Modifies the definition of the share tree (see share_tree(5)). The modified sharetree is read from file fname. Requires root or
manager privileges.
-Mu fname <modify ACL>
Takes the user access list (ACL) defined in fname to overwrite any existing ACL with the same name. See access_list(5) for informa-
tion on the ACL configuration format. Requires root or manager privilege.
-Muser fname <modify user>
Modify the user defined in fname in the Sun Grid Engine cluster. The format of the user specification is described in user(5).
Requires root or manager privileges.
-Rattr obj_spec fname obj_instance,...
<replace object attribs>
Similar to -rattr (see below) but the definition of the list attributes whose content is to be replace is contained in the file
named fname. As opposed to -rattr, multiple attributes can be modified. Their specification has to be enlisted in fname following
the file format of the corresponding object (see queue_conf(5) for the queue, for example).
Requires root/manager privileges.
-aattr obj_spec attr_name val obj_instance,...
<add to object attributes>
Allows adding specifications to a single configuration list attribute in multiple instances of an object with a single command. Cur-
rently supported objects are the queue, the host, the host group, the parallel environment, the resource quota sets and the check-
pointing interface configuration being specified as queue , exechost , hostgroup , pe , rqs or ckpt in obj_spec. For the obj_spec
queue the obj_instance can be a cluster queue name, a queue domain name or a queue instance name. Find more information concerning
different queue names in sge_types(1). Depending on the type of the obj_instance this adds to the cluster queues attribute sublist
the cluster queues implicit default configuration value or the queue domain configuration value or queue instance configuration
value. The queue load_thresholds parameter is an example of a list attribute. With the -aattr option, entries can be added to such
lists, while they can be deleted with -dattr, modified with -mattr, and replaced with -rattr.
For the obj_spec rqs the obj_instance is a unique identifier for a specific rule. The identifier consists of a rule-set name and
either the number of the rule in the list, or the name of the rule, separated by a /
The name of the configuration attribute to be enhanced is specified with attr_name followed by val as a name=value pair. The comma
separated list of object instances (e.g., the list of queues) to which the changes have to be applied are specified at the end of
the command.
The following restriction applies: For the exechost object the load_values attribute cannot be modified (see host_conf(5)).
Requires root or manager privileges.
-acal calendar_name <add calendar>
Adds a new calendar definition to the Sun Grid Engine environment. Calendars are used in Sun Grid Engine for defining availability
and unavailability schedules of queues. The format of a calendar definition is described in calendar_conf(5).
With the calendar name given in the option argument qconf will open a temporary file and start up the text editor indicated by the
environment variable EDITOR (default editor is vi(1) if EDITOR is not set). After entering the calendar definition and closing the
editor the new calendar is checked and registered with sge_qmaster(8). Requires root/manager privileges.
-ackpt ckpt_name <add ckpt. environment>
Adds a checkpointing environment under the name ckpt_name to the list of checkpointing environments maintained by Sun Grid Engine
and to be usable to submit checkpointing jobs (see checkpoint(5) for details on the format of a checkpointing environment defini-
tion). Qconf retrieves a default checkpointing environment configuration and executes vi(1) (or $EDITOR if the EDITOR environment
variable is set) to allow you to customize the checkpointing environment configuration. Upon exit from the editor, the checkpointing
environment is registered with sge_qmaster(8). Requires root/manager privileges.
-aconf host,... <add configuration>
Successively adds configurations (see sge_conf(5)) For the hosts in the comma separated file_list. For each host, an editor ($EDI-
TOR indicated or vi(1)) is invoked and the configuration for the host can be entered. The configuration is registered with sge_qmas-
ter(8) after saving the file and quitting the editor.
Requires root or manager privileges.
-ae [host_template] <add execution host>
Adds a host to the list of Sun Grid Engine execution hosts. If a queue is configured on a host this host is automatically added to
the Sun Grid Engine execution host list. Adding execution hosts explicitly offers the advantage to be able to specify parameters
like load scale values with the registration of the execution host. However, these parameters can be modified (from their defaults)
at any later time via the -me option described below.
If the host_template argument is present, qconf retrieves the configuration of the specified execution host from sge_qmaster(8) or a
generic template otherwise. The template is then stored in a file and qconf executes vi(1) (or the editor indicated by $EDITOR if
the EDITOR environment variable is set) to change the entries in the file. The format of the execution host specification is
described in host_conf(5). When the changes are saved in the editor and the editor is quit the new execution host is registered
with sge_qmaster(8). Requires root/manager privileges.
-ah hostname,... <add administrative host>
Adds hosts hostname to the Sun Grid Engine trusted host list (a host must be in this list to execute administrative Sun Grid Engine
commands, the sole exception to this being the execution of qconf on the sge_qmaster(8) node). The default Sun Grid Engine installa-
tion procedures usually add all designated execution hosts (see the -ae option above) to the Sun Grid Engine trusted host list auto-
matically. Requires root or manager privileges.
-ahgrp group <add host group config.>
Adds a new host group with the name specified in group. This command invokes an editor (either vi(1) or the editor indicated by the
EDITOR environment variable). The new host group entry is registered after changing the entry and exiting the editor. Requires
root or manager privileges.
-arqs [rqs_name] <add new RQS>
Adds one or more Resource Quota Set (RQS) description under the names rqs_name to the list of RQSs maintained by Sun Grid Engine
(see sge_resource_quota(5) for details on the format of a RQS definition). Qconf retrieves a default RQS configuration and executes
vi(1) (or $EDITOR if the EDITOR environment variable is set) to allow you to customize the RQS configuration. Upon exit from the
editor, the RQS is registered with sge_qmaster(8). Requires root or manager privileges.
-am user,... <add managers>
Adds the indicated users to the Sun Grid Engine manager list. Requires root or manager privileges.
-ao user,... <add operators>
Adds the indicated users to the Sun Grid Engine operator list. Requires root or manager privileges.
-ap pe_name <add new PE>
Adds a Parallel Environment (PE) description under the name pe_name to the list of PEs maintained by Sun Grid Engine and to be
usable to submit parallel jobs (see sge_pe(5) for details on the format of a PE definition). Qconf retrieves a default PE configu-
ration and executes vi(1) (or $EDITOR if the EDITOR environment variable is set) to allow you to customize the PE configuration.
Upon exit from the editor, the PE is registered with sge_qmaster(8). Requires root/manager privileges.
-at thread_name <activates thread in master>
Activates an additional thread in the master process. thread_name might be either "scheduler" or "jvm". The corresponding thread is
only started when it is not already running. There might be only one scheduler and only one jvm thread in the master process at the
same time.
-aprj <add new project>
Adds a project description to the list of registered projects (see project(5)). Qconf retrieves a template project configuration
and executes vi(1) (or $EDITOR if the EDITOR environment variable is set) to allow you to customize the new project. Upon exit from
the editor, the template is registered with sge_qmaster(8). Requires root or manager privileges.
-aq [queue_name] <add new queue>
Qconf retrieves the default queue configuration (see queue_conf(5)) and executes vi(1) (or $EDITOR if the EDITOR environment vari-
able is set) to allow you to customize the queue configuration. Upon exit from the editor, the queue is registered with sge_qmas-
ter(8). A minimal configuration requires only that the queue name and queue hostlist be set. Requires root or manager privileges.
-as hostname,... <add submit hosts>
Add hosts hostname to the list of hosts allowed to submit Sun Grid Engine jobs and control their behavior only. Requires root or
manager privileges.
-astnode node_path=shares,... <add share tree node>
Adds the specified share tree node(s) to the share tree (see share_tree(5)). The node_path is a hierarchical path
([/]node_name[[/.]node_name...]) specifying the location of the new node in the share tree. The base name of the node_path is the
name of the new node. The node is initialized to the number of specified shares. Requires root or manager privileges.
-astree <add share tree>
Adds the definition of a share tree to the system (see share_tree(5)). A template share tree is retrieved and an editor (either
vi(1) or the editor indicated by $EDITOR) is invoked for modifying the share tree definition. Upon exiting the editor, the modified
data is registered with sge_qmaster(8). Requires root or manager privileges.
-Astree fname <add share tree>
Adds the definition of a share tree to the system (see share_tree(5)) from the file fname. Requires root or manager privileges.
-au user,... acl_name,... <add users to ACLs>
Adds users to Sun Grid Engine user access lists (ACLs). User lists are used for queue usage authentication. Requires root/man-
ager/operator privileges.
-Auser fname <add user>
Add the user defined in fname to the Sun Grid Engine cluster. The format of the user specification is described in user(5).
Requires root or manager privileges.
-auser <add user>
Adds a user to the list of registered users (see user(5)). This command invokes an editor (either vi(1) or the editor indicated by
the EDITOR environment variable) for a template user. The new user is registered after changing the entry and exiting the editor.
Requires root or manager privileges.
-clearusage <clear sharetree usage>
Clears all user and project usage from the sharetree. All usage will be initialized back to zero.
-cq wc_queue_list <clean queue>
Cleans queue from jobs which haven't been reaped. Primarily a development tool. Requires root/manager/operator privileges. Find a
description of wc_queue_list in sge_types(1).
-dattr obj_spec attr_name val obj_instance,...
<delete in object attribs>
Allows deleting specifications in a single configuration list attribute in multiple instances of an object with a single command.
Find more information concerning obj_spec and obj_instance in the description of -aattr
-dcal calendar_name,... <delete calendar>
Deletes the specified calendar definition from Sun Grid Engine. Requires root/manager privileges.
-dckpt ckpt_name <delete ckpt. environment>
Deletes the specified checkpointing environment. Requires root/manager privileges.
-dconf host,... <delete local configuration>
The local configuration entries for the specified hosts are deleted from the configuration list. Requires root or manager privi-
lege.
-de host_name,... <delete execution host>
Deletes hosts from the Sun Grid Engine execution host list. Requires root or manager privileges.
-dh host_name,... <delete administrative host>
Deletes hosts from the Sun Grid Engine trusted host list. The host on which sge_qmaster(8) is currently running cannot be removed
from the list of administrative hosts. Requires root or manager privileges.
-dhgrp group <delete host group configuration>
Deletes host group configuration with the name specified in group. Requires root or manager privileges.
-drqs rqs_name_list <delete RQS>
Deletes the specified resource quota sets (RQS). Requires root or manager privileges.
-dm user[,user,...] <delete managers>
Deletes managers from the manager list. Requires root or manager privileges. It is not possible to delete the admin user or the
user root from the manager list.
-do user[,user,...] <delete operators>
Deletes operators from the operator list. Requires root or manager privileges. It is not possible to delete the admin user or the
user root from the operator list.
-dp pe_name <delete parallel environment>
Deletes the specified parallel environment (PE). Requires root or manager privileges.
-dprj project,... <delete projects>
Deletes the specified project(s). Requires root/manager privileges.
-dq queue_name,... <delete queue>
Removes the specified queue(s). Active jobs will be allowed to run to completion. Requires root or manager privileges.
-ds host_name,... <delete submit host>
Deletes hosts from the Sun Grid Engine submit host list. Requires root or manager privileges.
-dstnode node_path,... <delete share tree node>
Deletes the specified share tree node(s). The node_path is a hierarchical path ([/]node_name[[/.]node_name...]) specifying the
location of the node to be deleted in the share tree. Requires root or manager privileges.
-dstree <delete share tree>
Deletes the current share tree. Requires root or manager privileges.
-du user,... acl_name,... <delete users from ACL>
Deletes one or more users from one or more Sun Grid Engine user access lists (ACLs). Requires root/manager/operator privileges.
-dul acl_name,... <delete user lists>
Deletes one or more user lists from the system. Requires root/manager/operator privileges.
-duser user,... <delete users>"
Deletes the specified user(s) from the list of registered users. Requires root or manager privileges.
-help Prints a listing of all options.
-k{m|s|e[j] {host,...|all}} <shutdown Sun Grid Engine>
Note: The -ks switch is deprecated, may be removed in future release. Please use the -kt switch instead.
Used to shutdown Sun Grid Engine components (daemons). In the form -km sge_qmaster(8) is forced to terminate in a controlled fash-
ion. In the same way the -ks switch causes termination of the scheduler thread. Shutdown of running sge_execd(8) processes cur-
rently registered is initiated by the -ke option. If -kej is specified instead, all jobs running on the execution hosts are aborted
prior to termination of the corresponding sge_execd(8). The comma separated host list specifies the execution hosts to be addressed
by the -ke and -kej option. If the keyword all is specified instead of a host list, all running sge_execd(8) processes are shutdown.
Job abortion, initiated by the -kej option will result in dr state for all running jobs until sge_execd(8) is running again.
Requires root or manager privileges.
-kt thread_name <terminate master thread>"
Terminates a thread in the master process. Currently it is only supported to shutdown the "scheduler" and the "jvm" thread. The com-
mand will only be successful if the corresponding thread is running.
-kec {id,...|all} <kill event client>
Used to shutdown event clients registered at sge_qmaster(8). The comma separated event client list specifies the event clients to
be addressed by the -kec option. If the keyword all is specified instead of an event client list, all running event clients except
special clients like the scheduler thread are terminated. Requires root or manager privilege.
-mattr obj_spec attr_name val obj_instance,...
<modify object attributes>
Allows changing a single configuration attribute in multiple instances of an object with a single command. Find more information
concerning obj_spec and obj_instance in the description of -aattr
-mc <modify complex>
The complex configuration (see complex(5)) is retrieved, an editor is executed (either vi(1) or the editor indicated by $EDITOR) and
the changed complex configuration is registered with sge_qmaster(8) upon exit of the editor. Requires root or manager privilege.
-mcal calendar_name <modify calendar>
The specified calendar definition (see calendar_conf(5)) is retrieved, an editor is executed (either vi(1) or the editor indicated
by $EDITOR) and the changed calendar definition is registered with sge_qmaster(8) upon exit of the editor. Requires root or manager
privilege.
-mckpt ckpt_name <modify ckpt. environment>
Retrieves the current configuration for the specified checkpointing environment, executes an editor (either vi(1) or the editor
indicated by the EDITOR environment variable) and registers the new configuration with the sge_qmaster(8). Refer to checkpoint(5)
for details on the checkpointing environment configuration format. Requires root or manager privilege.
-mconf [host,...|global] <modify configuration>
The configuration for the specified host is retrieved, an editor is executed (either vi(1) or the editor indicated by $EDITOR) and
the changed configuration is registered with sge_qmaster(8) upon exit of the editor. If the optional host argument is omitted or if
the special host name global is specified, the global configuration is modified. The format of the configuration is described in
sge_conf(5).
Requires root or manager privilege.
-me hostname <modify execution host>
Retrieves the current configuration for the specified execution host, executes an editor (either vi(1) or the editor indicated by
the EDITOR environment variable) and registers the changed configuration with sge_qmaster(8) upon exit from the editor. The format
of the execution host configuration is described in host_conf(5). Requires root or manager privilege.
-mhgrp group <modify host group configuration>
The host group entries for the host group specified in group are retrieved and an editor (either vi(1) or the editor indicated by
the EDITOR environment variable) is invoked for modifying the host group configuration. By closing the editor, the modified data is
registered. The format of the host group configuration is described in hostgroup(5). Requires root or manager privileges.
-mrqs [rqs_name] <modify RQS configuration>
Retrieves the resource quota set (RQS)configuration defined in rqs_name, or if rqs_name is not given, retrieves all resource quota
sets, executes an editor (either vi(1) or the editor indicated by the EDITOR environment variable) and registers the new configura-
tion with the sge_qmaster(8). Refer to sge_resource_quota(5) for details on the RQS configuration format. Requires root or manager
privilege.
-mp pe_name <modify PE configuration>
Retrieves the current configuration for the specified parallel environment (PE), executes an editor (either vi(1) or the editor
indicated by the EDITOR environment variable) and registers the new configuration with the sge_qmaster(8). Refer to sge_pe(5) for
details on the PE configuration format. Requires root or manager privilege.
-mprj project <modify project>
Data for the specific project is retrieved (see project(5)) and an editor (either vi(1) or the editor indicated by $EDITOR) is
invoked for modifying the project definition. Upon exiting the editor, the modified data is registered. Requires root or manager
privileges.
-mq queuename <modify queue configuration>
Retrieves the current configuration for the specified queue, executes an editor (either vi(1) or the editor indicated by the EDITOR
environment variable) and registers the new configuration with the sge_qmaster(8). Refer to queue_conf(5) for details on the queue
configuration format. Requires root or manager privilege.
-msconf <modify scheduler configuration>
The current scheduler configuration (see sched_conf(5)) is retrieved, an editor is executed (either vi(1) or the editor indicated by
$EDITOR) and the changed configuration is registered with sge_qmaster(8) upon exit of the editor. Requires root or manager privi-
lege.
-mstnode node_path=shares,... <modify share tree node>
Modifies the specified share tree node(s) in the share tree (see share_tree(5)). The node_path is a hierarchical path
([/]node_name[[/.]node_name...]) specifying the location of an existing node in the share tree. The node is set to the number of
specified shares. Requires root or manager privileges.
-mstree <modify share tree>
Modifies the definition of the share tree (see share_tree(5)). The present share tree is retrieved and an editor (either vi(1) or
the editor indicated by $EDITOR) is invoked for modifying the share tree definition. Upon exiting the editor, the modified data is
registered with sge_qmaster(8). Requires root or manager privileges.
-mu acl_name <modify user access lists>
Retrieves the current configuration for the specified user access list, executes an editor (either vi(1) or the editor indicated by
the EDITOR environment variable) and registers the new configuration with the sge_qmaster(8). Requires root or manager privilege.
-muser user <modify user>
Data for the specific user is retrieved (see user(5)) and an editor (either vi(1) or the editor indicated by the EDITOR environment
variable) is invoked for modifying the user definition. Upon exiting the editor, the modified data is registered. Requires root or
manager privileges.
-purge queue attr_nm,... obj_spec
<purge divergent attribute settings>
Delete the values of the attributes defined in attr_nm from the object defined in obj_spec. Obj_spec can be "queue_instance" or
"queue_domain". The names of the attributes are described in queue_conf(1).
This operation only works on a single queue instance or domain. It cannot be used on a cluster queue. In the case where the
obj_spec is "queue@@hostgroup", the attribute values defined in attr_nm which are set for the indicated hostgroup are deleted, but
not those which are set for the hosts contained by that hostgroup. If the attr_nm is '*', all attribute values set for the given
queue instance or domain are deleted.
The main difference between -dattr and -purge is that -dattr removes a value from a single list attribute, whereas -purge removes
one or more overriding attribute settings from a cluster queue configuration. With -purge, the entire attribute is deleted for the
given queue instance or queue domain.
-rattr obj_spec attr_name val obj_instance,...
<replace object attributes>
Allows replacing a single configuration list attribute in multiple instances of an object with a single command. Find more informa-
tion concerning obj_spec and obj_instance in the description of -aattr .
Requires root or manager privilege.
-rsstnode node_path,... <show share tree node>
Recursively shows the name and shares of the specified share tree node(s) and the names and shares of its child nodes. (see
share_tree(5)). The node_path is a hierarchical path ([/]node_name[[/.]node_name...]) specifying the location of a node in the
share tree.
-sc <show complexes>
Display the complex configuration.
-scal calendar_name <show calendar>
Display the configuration of the specified calendar.
-scall <show calendar list>
Show a list of all calendars currently defined.
-sckpt ckpt_name <show ckpt. environment>
Display the configuration of the specified checkpointing environment.
-sckptl <show ckpt. environment list>
Show a list of the names of all checkpointing environments currently configured.
-sconf [host,...|global] <show configuration>
Print the global or local (host specific) configuration. If the optional comma separated host list argument is omitted or the spe-
cial string global is given, the global configuration is displayed. The configuration in effect on a certain host is the merger of
the global configuration and the host specific local configuration. The format of the configuration is described in sge_conf(5).
-sconfl <show configuration list>
Display a list of hosts for which configurations are available. The special host name global refers to the global configuration.
-sds <show detached settings>
Displays detached settings in the cluster configuration.
-se hostname <show execution host>
Displays the definition of the specified execution host.
-sel <show execution hosts>
Displays the Sun Grid Engine execution host list.
-secl <show event clients>
Displays the Sun Grid Engine event client list.
-sep <show licensed processors>
Note: Deprecated, may be removed in future release.
Displays a list of virtual processors. This value is taken from the underlying OS and it depends on underlying hardware and operat-
ing system whether this value represents sockets, cores or supported threads.
If this option is used in combination with -cb parameter then two additional columns will be shown in the output for the number of
sockets and number of cores. Currently SGE will enlist these values only if the corresponding operating system of execution host is
Linux under kernel >= 2.6.16, or Solaris 10. Other operating systems or versions might be supported with the future update releases.
In case these values won't be retrieved, '0' character will be displayed.
-sh <show administrative hosts>
Displays the Sun Grid Engine administrative host list.
-shgrp group <show host group config.>
Displays the host group entries for the group specified in group.
-shgrpl <show host group lists>
Displays a name list of all currently defined host groups which have a valid host group configuration.
-shgrp_tree group <show host group tree>
Shows a tree like structure of host group.
-shgrp_resolved group <show host group hosts>
Shows a list of all hosts which are part of the definition of host group. If the host group definition contains sub host groups than
also these groups are resolved and the hostnames are printed.
-srqs [rqs_name_list] <show RQS configuration>
Show the definition of the resource quota sets (RQS) specified by the argument.
-srqsl <show RQS-list>
Show a list of all currently defined resource quota setss (RQSs).
-sm <show managers>
Displays the managers list.
-so <show operators>
Displays the operator list.
-sobjl obj_spec attr_name val <show object list>
Shows a list of all configuration objects for which val matches at least one configuration value of the attributes whose name
matches with attr_name.
Obj_spec can be "queue" or "queue_domain" or "queue_instance" or "exechost". Note: When "queue_domain" or "queue_instance" is spec-
ified as obj_spec matching is only done with the attribute overridings concerning the host group or the execution host. In this case
queue domain names resp. queue instances are returned.
Attr_name can be any of the configuration file keywords enlisted in queue_conf(5) or host_conf(5). Also wildcards can be used to
match multiple attributes.
Val can be an arbitrary string or a wildcard expression.
-sp pe_name <show PE configuration>
Show the definition of the parallel environment (PE) specified by the argument.
-spl <show PE-list>
Show a list of all currently defined parallel environments (PEs).
-sprj project <show project>
Shows the definition of the specified project (see project(5)).
-sprjl <show project list>
Shows the list of all currently defined projects.
-sq wc_queue_list <show queues>
Displays one or multiple cluster queues or queue instances. A description of wc_queue_list can be found in sge_types(1).
-sql <show queue list>
Show a list of all currently defined cluster queues.
-ss <show submit hosts>
Displays the Sun Grid Engine submit host list.
-ssconf <show scheduler configuration>
Displays the current scheduler configuration in the format explained in sched_conf(5).
-sstnode node_path,... <show share tree node>
Shows the name and shares of the specified share tree node(s) (see share_tree(5)). The node_path is a hierarchical path
([/]node_name[[/.]node_name...]) specifying the location of a node in the share tree.
-sstree <show share tree>
Shows the definition of the share tree (see share_tree(5)).
-sst <show formatted share tree>
Shows the definition of the share tree in a tree view (see share_tree(5)).
-sss <show scheduler status>
Currently displays the host on which the Sun Grid Engine scheduler is active or an error message if no scheduler is running.
-su acl_name <show user ACL>
Displays a Sun Grid Engine user access list (ACL).
-sul <show user lists>
Displays a list of names of all currently defined Sun Grid Engine user access lists (ACLs).
-suser user,... <show user>
Shows the definition of the specified user(s) (see user(5)).
-suserl <show users>
Shows the list of all currently defined users.
-tsm <trigger scheduler monitoring>
The Sun Grid Engine scheduler is forced by this option to print trace messages of its next scheduling run to the file
<sge_root>/<cell>/common/schedd_runlog. The messages indicate the reasons for jobs and queues not being selected in that run.
Requires root or manager privileges.
Note, that the reasons for job requirements being invalid with respect to resource availability of queues are displayed using the
format as described for the qstat(1) -F option (see description of Full Format in section OUTPUT FORMATS of the qstat(1) manual
page.
ENVIRONMENTAL VARIABLES
SGE_ROOT Specifies the location of the Sun Grid Engine standard configuration files.
SGE_CELL If set, specifies the default Sun Grid Engine cell. To address a Sun Grid Engine cell qconf uses (in the order of prece-
dence):
The name of the cell specified in the environment variable SGE_CELL, if it is set.
The name of the default cell, i.e. default.
SGE_DEBUG_LEVEL
If set, specifies that debug information should be written to stderr. In addition the level of detail in which debug infor-
mation is generated is defined.
SGE_QMASTER_PORT
If set, specifies the tcp port on which sge_qmaster(8) is expected to listen for communication requests. Most installations
will use a services map entry instead to define that port.
SGE_EXECD_PORT If set, specifies the tcp port on which sge_execd(8) is expected to listen for communication requests. Most installations
will use a services map entry instead to define that port.
SGE_SINGLE_LINE
If set, indicates that long lines should not be broken up using backslashes. This setting is useful for scripts which
expect one entry per line.
RESTRICTIONS
Modifications to a queue configuration do not affect an active queue, taking effect on next invocation of the queue (i.e., the next job).
FILES
<sge_root>/<cell>/common/act_qmaster
Sun Grid Engine master host file
SEE ALSO
sge_intro(1), qstat(1), checkpoint(5), complex(5), sge_conf(5), host_conf(5), sge_pe(5), queue_conf(5), sge_execd(8), sge_qmaster(8),
sge_resource_quota(5)
COPYRIGHT
See sge_intro(1) for a full statement of rights and permissions.
SGE 6.2u5 $Date$ QCONF(1)