OSC(1) User Commands OSC(1)
NAME
osc - openSUSE build service command-line tool.
SYNOPSIS
osc [GLOBALOPTS] SUBCOMMAND [OPTS] [ARGS...]
osc help SUBCOMMAND
DESCRIPTION
openSUSE build service command-line tool.
COMMANDS
abortbuild
Aborts the build of a certain project or package
usage:
osc abortbuild [PROJECT [PACKAGE [REPOSITORY [ARCH]]]] Options:
-h, --help show this help message and exit
--all Abort all running builds of entire project
-r REPO, --repo=REPO
Abort builds for a specific repository
-a ARCH, --arch=ARCH
Abort builds for a specific architecture
add Mark files to be added upon the next commit
In case a URL is given the file will get downloaded and registered to be downloaded by the server as well via the download_url
source service.
This is recommended for release tar balls to track their source and to help others to review your changes esp. on version upgrades.
usage:
osc add URL [URL...]
osc add FILE [FILE...]
addremove (ar)
Adds new files, removes disappeared files
Adds all files new in the local copy, and removes all disappeared files.
ARG, if specified, is a package working copy.
Usage:
osc addremove [ARGS...]
Options:
-h, --help show this help message and exit
-r, --recursive
If CWD is a project dir then scan all package dirs as
well
aggregatepac
"Aggregate" a package to another package
Aggregation of a package means that the build results (binaries) of a package are basically copied into another project. This can
be used to make packages available from building that are needed in a project but available only in a different project. Note that
this is done at the expense of disk space. See http://en.opensuse.org/openSUSE:Build_Service_Tips_and_Tricks#link_and_aggregate for
more information.
The DESTPAC name is optional; the source packages' name will be used if DESTPAC is omitted.
usage:
osc aggregatepac SOURCEPRJ SOURCEPAC DESTPRJ [DESTPAC] Options:
-h, --help show this help message and exit
-d, --disable-publish
disable publishing of the aggregated package
-m SRC=TARGET[,SRC=TARGET], --map-repo=SRC=TARGET[,SRC=TARGET]
Allows repository mapping(s) to be given as
SRC=TARGET[,SRC=TARGET]
--nosources
ignore source packages when copying build results to
destination project
api Issue an arbitrary request to the API
Useful for testing.
URL can be specified either partially (only the path component), or fully with URL scheme and hostname ('http://...').
Note the global -A and -H options (see osc help).
Examples:
osc api /source/home:user
osc api -X PUT -T /etc/fstab source/home:user/test5/myfstab
Usage:
osc api URL
Options:
-h, --help show this help message and exit
-a NAME STRING, --add-header=NAME STRING
add the specified header to the request
-T FILE, -f FILE, --file=FILE
specify filename to upload, uses PUT mode by default
-d STRING, --data=STRING
specify string data for e.g. POST
-X HTTP_METHOD, -m HTTP_METHOD, --method=HTTP_METHOD
specify HTTP method to use (GET|PUT|DELETE|POST)
branch (bco, branchco, getpac)
Branch a package
[See http://en.opensuse.org/openSUSE:Build_Service_Collaboration for information on this topic.]
Create a source link from a package of an existing project to a new subproject of the requesters home project (home:branches:)
The branched package will live in
home:USERNAME:branches:PROJECT/PACKAGE if nothing else specified.
With getpac or bco, the branched package will come from one of
openSUSE:Factory (list of projects from oscrc:getpac_default_project) if nothing else is specfied on the command line.
usage:
osc branch
osc branch SOURCEPROJECT SOURCEPACKAGE
osc branch SOURCEPROJECT SOURCEPACKAGE TARGETPROJECT
osc branch SOURCEPROJECT SOURCEPACKAGE TARGETPROJECT TARGETPACKAGE
osc getpac SOURCEPACKAGE
osc bco ... Options:
-h, --help show this help message and exit
-r rev, --revision=rev
branch against a specific revision
-N, --new-package
create a branch pointing to a not yet existing package
-M, --maintenance
Create project and package in maintenance mode
-m TEXT, --message=TEXT
specify message TEXT
--noaccess Create a hidden project
--extend-package-names
Extend packages names with project name as suffix
--add-repositories
Add repositories to target project (happens by default
when project is new)
-f, --force
force branch, overwrite target
-c, --checkout
Checkout branched package afterwards using "co -e
-S"('osc bco' is a shorthand for this option)
--nodevelproject
do not follow a defined devel project (primary project
where a package is developed)
bugowner
Show bugowners of a project/package
osc bugowner PRJ
osc bugowner PRJ PKG
PRJ and PKG default to current working-copy path. Prints bugowner if defined, or maintainer otherwise.
Shortcut for osc maintainer -B [PRJ] PKG
Options:
-h, --help show this help message and exit
-e, --email
show email addresses instead of user names
--nodevelproject
do not follow a defined devel project (primary project
where a package is developed)
-v, --verbose
show more information
build Build a package on your local machine
You need to call the command inside a package directory, which should be a buildsystem checkout. (Local modifications are fine.)
The arguments REPOSITORY and ARCH can be taken from the first two columns of the 'osc repos' output. BUILD_DESCR is either a RPM
spec file, or a Debian dsc file.
The command honours packagecachedir, build-root and build-uid settings in .oscrc, if present. You may want to set su-wrapper =
'sudo' in .oscrc, and configure sudo with option NOPASSWD for /usr/bin/build.
If neither --clean nor --noinit is given, build will reuse an existing build-root again, removing unneeded packages and add missing
ones. This is usually the fastest option.
If the package doesn't exist on the server please use the --local-package option. If the project of the package doesn't exist on
the server please use the --alternative-project <alternative-project> option: Example:
osc build [OPTS] --alternative-project openSUSE:10.3 standard i586 BUILD_DESCR
usage:
osc build [OPTS] REPOSITORY ARCH BUILD_DESCR
osc build [OPTS] REPOSITORY ARCH
osc build [OPTS] REPOSITORY (ARCH = hostarch, BUILD_DESCR is detected automatically)
osc build [OPTS] ARCH (REPOSITORY = build_repository (config option), BUILD_DESCR is detected automatically)
osc build [OPTS] BUILD_DESCR (REPOSITORY = build_repository (config option), ARCH = hostarch)
osc build [OPTS] (REPOSITORY = build_repository (config option), ARCH = hostarch, BUILD_DESCR is detected automatically)
# Note: # Configuration can be overridden by envvars, e.g. # OSC_SU_WRAPPER overrides the setting of su-wrapper. # OSC_BUILD_ROOT
overrides the setting of build-root. # OSC_PACKAGECACHEDIR overrides the setting of packagecachedir.
Options:
-h, --help show this help message and exit
--oldpackages=DIR
take previous build from DIR (special values: _self,
_link)
--disable-cpio-bulk-download
disable downloading packages as cpio archive from api
--release=N
set release number of the package to N
-b, --baselibs
Create -32bit/-64bit/-x86 rpms for other architectures
--disable-debuginfo
disable build of debuginfo packages
-d, --debuginfo
also build debuginfo sub-packages
--alternative-project=PROJECT
specify the build target project
--vm-type=TYPE
use VM type TYPE (e.g. kvm)
--linksources
use hard links instead of a deep copied source
--local-package
build a package which does not exist on the server
--build-uid=uid:gid|"caller"
specify the numeric uid:gid pair to assign to the
unprivileged "abuild" user or use "caller" to use the
current user uid:gid
--userootforbuild
Run build as root. The default is to build as
unprivileged user. Note that a line "# norootforbuild"
in the spec file will invalidate this option.
--define='X Y'
define macro X with value Y
--without=X
disable feature X for build
--with=X enable feature X for build
--ccache use ccache to speed up rebuilds
--icecream=N
use N parallel build jobs with icecream
-j N, --jobs=N
Compile with N jobs
--root=ROOT
Build in specified directory
-x PAC, --extra-pkgs=PAC
Add this package when installing the build-root
-k DIR, --keep-pkgs=DIR
Save built packages into this directory
-p DIR, --prefer-pkgs=DIR
Prefer packages from this directory when installing
the build-root
--noservice, --no-service
Skip run of local source services as specified in
_service file.
--no-verify
Skip signature verification of packages used for
build. (Global config in .oscrc: no_verify)
--nochecks, --no-checks
Do not run post build checks on the resulting
packages.
--noinit, --no-init
Skip initialization of build root and start with build
immediately.
--overlay=OVERLAY
Copy overlay filesystem to buildroot after installing
all RPMs .
--rsync-dest=RSYNCDESTPATH
Copy folder to buildroot after installing all RPMs.
Use together with --rsync-src. This is the path on the
TARGET filesystem e.g.
/usr/src/packages/BUILD/linux-2.6 .
--rsync-src=RSYNCSRCPATH
Copy folder to buildroot after installing all RPMs.
Use together with --rsync-dest. This is the path on
the HOST filesystem e.g. /tmp/linux-kernel-tree. It
defines RSYNCDONE 1 .
--no-changelog
don't update the package changelog from a changes file
-l, --preload
Preload all files into the cache for offline operation
-o, --offline
Start with cached prjconf and packages without
contacting the api server
--clean Delete old build root before initializing it
buildconfig
Shows the build config
Shows the build configuration which is used in building a package. This command is mostly used internally by the 'build' command.
The returned data is the project-wide build configuration in a format which is directly readable by the build script. It contains
RPM macros and BuildRequires expansions, for example.
The argument REPOSITORY an be taken from the first column of the
'osc repos' output.
usage:
osc buildconfig REPOSITORY (in pkg or prj dir)
osc buildconfig PROJECT REPOSITORY
buildhistory (buildhist)
Shows the build history of a package
The arguments REPOSITORY and ARCH can be taken from the first two columns of the 'osc repos' output.
usage:
osc buildhist REPOSITORY ARCHITECTURE
osc buildhist PROJECT PACKAGE REPOSITORY ARCHITECTURE Options:
-h, --help show this help message and exit
--csv generate output in CSV (separated by |)
buildinfo
Shows the build info
Shows the build "info" which is used in building a package. This command is mostly used internally by the 'build' subcommand. It
needs to be called from within a package directory.
The BUILD_DESCR argument is optional. BUILD_DESCR is a local RPM specfile or Debian "dsc" file. If specified, it is sent to the
server, and the buildinfo will be based on it. If the argument is not supplied, the buildinfo is derived from the specfile which is
currently on the source repository server.
The returned data is XML and contains a list of the packages used in building, their source, and the expanded BuildRequires.
The arguments REPOSITORY and ARCH are optional. They can be taken from the first two columns of the 'osc repos' output. If not spec-
ified, REPOSITORY defaults to the 'build_repositoy' config entry in your '.oscrc' and ARCH defaults to your host architecture.
usage:
in a package working copy:
osc buildinfo [OPTS] REPOSITORY ARCH BUILD_DESCR
osc buildinfo [OPTS] REPOSITORY (ARCH = hostarch, BUILD_DESCR is detected automatically)
osc buildinfo [OPTS] ARCH (REPOSITORY = build_repository (config option), BUILD_DESCR is detected automatically)
osc buildinfo [OPTS] BUILD_DESCR (REPOSITORY = build_repository (config option), ARCH = hostarch)
osc buildinfo [OPTS] (REPOSITORY = build_repository (config option), ARCH = hostarch, BUILD_DESCR is detected automatically)
Note: if BUILD_DESCR does not exist locally the remote BUILD_DESCR is used
osc buildinfo [OPTS] PROJECT PACKAGE REPOSITORY ARCH [BUILD_DESCR]
Options:
-h, --help show this help message and exit
-p DIR, --prefer-pkgs=DIR
Prefer packages from this directory when installing
the build-root
-x PAC, --extra-pkgs=PAC
Add this package when computing the buildinfo
buildlog (bl, blt, buildlogtail)
Shows the build log of a package
Shows the log file of the build of a package. Can be used to follow the log while it is being written. Needs to be called from
within a package directory.
When called as buildlogtail (or blt) it just shows the end of the logfile. This is useful to see just a build failure reasons.
The arguments REPOSITORY and ARCH are the first two columns in the 'osc results' output. If the buildlog url is used buildlog com-
mand has the same behavior as remotebuildlog.
Usage:
osc buildlog [ARGS...]
[REPOSITORY ARCH | BUILDLOGURL] Options:
-h, --help show this help message and exit
-o OFFSET, --offset=OFFSET
get log start or end from the offset
cat (less)
Output the content of a file to standard output
Examples:
osc cat project package file
osc cat project/package/file
osc cat http://api.opensuse.org/build/.../_log
osc cat http://api.opensuse.org/source/../_link
Usage:
osc cat [ARGS...]
Options:
-h, --help show this help message and exit
-M, --meta list meta data files
-u, --unexpand
always work with unexpanded packages.
-e, --expand
force expansion of linked packages.
-r rev, --revision=rev
print out the specified revision
changedevelrequest (changedevelreq, cr)
Create request to change the devel package definition.
[See http://en.opensuse.org/openSUSE:Build_Service_Collaboration for information on this topic.]
See the "request" command for showing and modifing existing requests.
osc changedevelrequest PROJECT PACKAGE DEVEL_PROJECT [DEVEL_PACKAGE]
checkout (co)
Check out content from the repository
Check out content from the repository server, creating a local working copy.
When checking out a single package, the option --revision can be used to specify a revision of the package to be checked out.
When a package is a source link, then it will be checked out in expanded form. If --unexpand-link option is used, the checkout will
instead produce the raw _link file plus patches.
usage:
osc co PROJECT [PACKAGE] [FILE]
osc co PROJECT # entire project
osc co PROJECT PACKAGE # a package
osc co PROJECT PACKAGE FILE # single file -> to current dir
while inside a project directory:
osc co PACKAGE # check out PACKAGE from project
with the result of rpm -q --qf '%{DISTURL}0 PACKAGE
osc co obs://API/PROJECT/PLATFORM/REVISION-PACKAGE
Options:
-h, --help show this help message and exit
-l limit_size, --limit-size=limit_size
Skip all files with a given size
-S, --server-side-source-service-files
Use server side generated sources instead of local
generation.
-s, --source-service-files
Run source services.
-o outdir, --output-dir=outdir
place package in the specified directoryinstead of a
PROJECT/PACKAGE directory
-c, --current-dir
place PACKAGE folder in the current directoryinstead
of a PROJECT/PACKAGE directory
-M, --meta checkout out meta data instead of sources
-u, --unexpand-link
if a package is a link, check out the _link file
instead of the expanded sources
-e, --expand-link
if a package is a link, check out the expanded sources
(no-op, since this became the default)
-r rev, --revision=rev
checkout the specified revision. NOTE: if you checkout
the complete project this option is ignored!
chroot chroot into the buildchroot
chroot into the buildchroot for the given repository, arch and build description (NOTE: this command does not work if "build-type"
is set in the config)
usage:
osc chroot [OPTS] REPOSITORY ARCH BUILD_DESCR
osc chroot [OPTS] REPOSITORY (ARCH = hostarch, BUILD_DESCR is detected automatically)
osc chroot [OPTS] ARCH (REPOSITORY = build_repository (config option), BUILD_DESCR is detected automatically)
osc chroot [OPTS] BUILD_DESCR (REPOSITORY = build_repository (config option), ARCH = hostarch)
osc chroot [OPTS] (REPOSITORY = build_repository (config option), ARCH = hostarch, BUILD_DESCR is detected automatically)
Options:
-h, --help show this help message and exit
-o, --offline
Use cached data without contacting the api server
-r, --root login as root instead of abuild
--noinit, --no-init
do not guess/verify specified repository
--alternative-project=PROJECT
specify the used build target project
--local-package
package doesn't exist on the server
commit (checkin, ci)
Upload content to the repository server
Upload content which is changed in your working copy, to the repository server.
examples:
osc ci # current dir
osc ci <dir>
osc ci file1 file2 ...
Usage:
osc commit [ARGS...]
Options:
-h, --help show this help message and exit
--skip-local-service-run, --noservice
Skip service run of configured source services for
local run
-v, --verbose
Run the source services with verbose information
--skip-validation
deprecated, don't use it
-f, --force
ignored
-F FILE, --file=FILE
read log message from FILE, '-' denotes standard
input.
-m TEXT, --message=TEXT
specify log message TEXT
config get/set a config option
Examples:
osc config section option (get current value)
osc config section option value (set to value)
osc config section option --delete (delete option/reset to the default)
(section is either an apiurl or an alias or 'general')
osc config --dump (dump the complete configuration)
Usage:
osc config [ARGS...]
Options:
-h, --help show this help message and exit
--dump-full
dump the complete configuration (including 'pass' and
'passx' options)
--dump dump the complete configuration (without 'pass' and
'passx' options)
--no-echo prompt for a value but do not echo entered characters
-p, --prompt
prompt for a value
-s, --stdin
indicates that the config value should be read from
stdin
-d, --delete
delete option from config or reset option to the
default)
copypac
Copy a package
A way to copy package to somewhere else.
It can be done across buildservice instances, if the -t option is used. In that case, a client-side copy and link expansion are
implied.
Using --client-side-copy always involves downloading all files, and uploading them to the target.
The DESTPAC name is optional; the source packages' name will be used if DESTPAC is omitted.
usage:
osc copypac SOURCEPRJ SOURCEPAC DESTPRJ [DESTPAC] Options:
-h, --help show this help message and exit
-e, --expand
if the source package is a link then copy the expanded
version of the link
-m TEXT, --message=TEXT
specify message TEXT
-t URL, --to-apiurl=URL
URL of destination api server. Default is the source
api server.
-r rev, --revision=rev
link the specified revision.
-d, --keep-develproject
keep develproject tag in the package metadata
-K, --keep-link
keep the source link in target, this also expands the
source
-k, --keep-maintainers
keep original maintainers. Default is remove all and
replace with the one calling the script.
-c, --client-side-copy
do a (slower) client-side copy
createincident
Create a maintenance incident
[See http://doc.opensuse.org/products/draft/OBS/obs-reference-guide/cha.obs.maintenance_setup.html for information on this topic.]
This command is asking to open an empty maintence incident. This can usually only be done by a responsible maintenance team. Please
see the "mbranch" command on how to full such a project content and the "patchinfo" command how add the required maintenance update
information.
usage:
osc createincident [ MAINTENANCEPROJECT ] Options:
-h, --help show this help message and exit
-m TEXT, --message=TEXT
specify message TEXT
--noaccess Create a hidden project
-a ATTRIBUTE, --attribute=ATTRIBUTE
Use this attribute to find default maintenance project
(default is OBS:MaintenanceProject)
createrequest (creq)
create multiple requests with a single command
usage:
osc creq [OPTIONS] [
-a submit SOURCEPRJ SOURCEPKG DESTPRJ [DESTPKG]
-a delete PROJECT [PACKAGE]
-a change_devel PROJECT PACKAGE DEVEL_PROJECT [DEVEL_PACKAGE]
-a add_me ROLE PROJECT [PACKAGE]
-a add_group GROUP ROLE PROJECT [PACKAGE]
-a add_role USER ROLE PROJECT [PACKAGE]
-a set_bugowner USER PROJECT [PACKAGE]
]
Option -m works for all types of request, the rest work only for submit. example:
osc creq -a submit -a delete home:someone:branches:openSUSE:Tools -a change_devel openSUSE:Tools osc home:someone:branches:open-
SUSE:Tools -m ok
This will submit all modified packages under current directory, delete project home:someone:branches:openSUSE:Tools and change
the devel project to home:someone:branches:openSUSE:Tools for package osc in project openSUSE:Tools. Options:
-h, --help show this help message and exit
--yes proceed without asking.
-d, --diff show diff only instead of creating the actual request
--no-update
never touch source package on accept (will break
source links)
--no-cleanup
never remove source package on accept, but update its
content
--cleanup remove package if submission gets accepted (default
for home:<id>:branch projects)
--nodevelproject
do not follow a defined devel project (primary project
where a package is developed)
-s SUPERSEDE, --supersede=SUPERSEDE
Superseding another request by this one
-r REV, --revision=REV
for "create", specify a certain source revision ID
(the md5 sum)
-m TEXT, --message=TEXT
specify message TEXT
-a, --action
specify action type of a request, can be :
submit/delete/change_devel/add_role/set_bugowner
delete (del, remove, rm)
Mark files or package directories to be deleted upon the next 'checkin'
usage:
cd .../PROJECT/PACKAGE
osc delete FILE [...]
cd .../PROJECT
osc delete PACKAGE [...]
This command works on check out copies. Use "rdelete" for working on server side only. This is needed for removing the entire
project.
As a safety measure, projects must be empty (i.e., you need to delete all packages first).
If you are sure that you want to remove a package and all its files use '--force' switch. Sometimes this also works without --force.
Options:
-h, --help show this help message and exit
-f, --force
forces removal of entire package and its files
deleterequest (deletereq, dr, dropreq, droprequest)
Request to delete (or 'drop') a package or project
usage:
osc deletereq [-m TEXT] # works in checked out project/package
osc deletereq [-m TEXT] PROJECT [PACKAGE] Options:
-h, --help show this help message and exit
-m TEXT, --message=TEXT
specify message TEXT
dependson (whatdependson)
Show the build dependencies
The command dependson and whatdependson can be used to find out what will be triggered when a certain package changes. This is no
guarantee, since the new build might have changed dependencies.
dependson shows the build dependencies inside of a project, valid for a given repository and architecture. NOTE: to see all binary
packages, which can trigger a build you need to
refer the buildinfo, since this command shows only the dependencies
inside of a project.
The arguments REPOSITORY and ARCH can be taken from the first two columns of the 'osc repos' output.
usage in package or project directory:
osc dependson REPOSITORY ARCH
osc whatdependson REPOSITORY ARCH
usage:
osc dependson PROJECT [PACKAGE] REPOSITORY ARCH
osc whatdependson PROJECT [PACKAGE] REPOSITORY ARCH
detachbranch
replace a link with its expanded sources
If a package is a link it is replaced with its expanded sources. The link does not exist anymore.
usage:
osc detachbranch # can be used in package working copy
osc detachbranch PROJECT PACKAGE Options:
-h, --help show this help message and exit
-m TEXT, --message=TEXT
specify message TEXT
develproject (bsdevelproject)
print the bsdevelproject of a package
Examples:
osc develproject PRJ PKG
osc develproject Options:
-h, --help show this help message and exit
-r, --raw print raw xml snippet
diff (di, ldiff, linkdiff)
Generates a diff
Generates a diff, comparing local changes against the repository server.
Usage:
osc diff [ARGS...]
ARG, if specified, is a filename to include in the diff.
Default: all files.
osc diff --link
osc linkdiff
Compare current checkout directory against the link base.
osc diff --link PROJ PACK
osc linkdiff PROJ PACK
Compare a package against the link base (ignoring working copy changes).
Options:
-h, --help show this help message and exit
--missingok
do not fail if the source or target project/package
does not exist on the server
-l, --link (osc linkdiff): compare against the base revision of
the link
-p, --plain
output the diff in plain (not unified) diff format
-r rev1[:rev2], --revision=rev1[:rev2]
If rev1 is specified it will compare your working copy
against the revision (rev1) on the server. If rev1 and
rev2 are specified it will compare rev1 against rev2
(NOTE: changes in your working copy are ignored in
this case)
-c rev, --change=rev
the change made by revision rev (like -r rev-1:rev).If
rev is negative this is like -r rev:rev-1.
distributions (dists)
Shows all available distributions
This command shows the available distributions. For active distributions it shows the name, project and name of the repository and a
suggested default repository name.
usage:
osc distributions
getbinaries
Download binaries to a local directory
This command downloads packages directly from the api server. Thus, it directly accesses the packages that are used for building
others even when they are not "published" yet.
usage:
osc getbinaries REPOSITORY # works in checked out project/package (check out all archs in sub-
dirs)
osc getbinaries REPOSITORY ARCHITECTURE # works in checked out project/package
osc getbinaries PROJECT PACKAGE REPOSITORY ARCHITECTURE Options:
-h, --help show this help message and exit
--debug also fetch debug packages
--sources also fetch source packages
-d DIR, --destdir=DIR
destination directory
-q, --quiet
do not show downloading progress
help (?, h)
give detailed help on a specific sub-command
usage:
osc help [SUBCOMMAND]
importsrcpkg
Import a new package from a src.rpm
A new package dir will be created inside the project dir (if no project is specified and the current working dir is a project dir
the package will be created in this project). If the package does not exist on the server it will be created too otherwise the meta
data of the existing package will be updated (<title /> and <description />). The src.rpm will be extracted into the package dir.
The files won't be committed unless you explicitly pass the --commit switch.
SRPM is the path of the src.rpm in the local filesystem, or an URL.
Usage:
osc importsrcpkg SRPM
Options:
-h, --help show this help message and exit
-c, --commit
commit the new files
--delete-old-files
delete existing files from the server
-d description, --description=description
set the description of the package
-t title, --title=title
set a title
-n name, --name=name
specify a package name
-p project, --project=project
specify the path to a project
info Print information about a working copy
Print information about each ARG (default: '.') ARG is a working-copy path.
Usage:
osc info [ARGS...]
init Initialize a directory as working copy
Initialize an existing directory to be a working copy of an (already existing) buildservice project/package.
(This is the same as checking out a package and then copying sources into the directory. It does NOT create a new package. To create
a package, use 'osc meta pkg ... ...')
You wouldn't normally use this command.
To get a working copy of a package (e.g. for building it or working on it, you would normally use the checkout command. Use "osc
help checkout" to get help for it.
usage:
osc init PRJ
osc init PRJ PAC
jobhistory (jobhist)
Shows the job history of a project
The arguments REPOSITORY and ARCH can be taken from the first two columns of the 'osc repos' output.
usage:
osc jobhist REPOSITORY ARCHITECTURE (in project dir)
osc jobhist PROJECT [PACKAGE] REPOSITORY ARCHITECTURE Options:
-h, --help show this help message and exit
-l limit, --limit=limit
for setting the number of results
--csv generate output in CSV (separated by |)
linkpac
"Link" a package to another package
A linked package is a clone of another package, but plus local modifications. It can be cross-project.
The DESTPAC name is optional; the source packages' name will be used if DESTPAC is omitted.
Afterwards, you will want to 'checkout DESTPRJ DESTPAC'.
To add a patch, add the patch as file and add it to the _link file. You can also specify text which will be inserted at the top of
the spec file.
See the examples in the _link file.
NOTE: In case you want to fix or update another package, you should use the 'branch'
command. A branch has correct repositories (and a link) setup up by default and
will be cleaned up automatically after it was submitted back.
usage:
osc linkpac SOURCEPRJ SOURCEPAC DESTPRJ [DESTPAC] Options:
-h, --help show this help message and exit
-N, --new-package
create a link to a not yet existing package
-d, --disable-publish
disable publishing of the linked package
-f, --force
overwrite an existing link file if it is there.
-r rev, --revision=rev
link the specified revision.
-c, --current
link fixed against current revision.
-C CICOUNT, --cicount=CICOUNT
cicount attribute in the link, known values are add,
copy, and local, default in buildservice is currently
add.
linktobranch
Convert a package containing a classic link with patch to a branch
This command tells the server to convert a _link with or without a project.diff to a branch. This is a full copy with a _link file
pointing to the branched place.
usage:
osc linktobranch # can be used in checked out package
osc linktobranch PROJECT PACKAGE
list (LL, lL, ll, ls)
List sources or binaries on the server
Examples for listing sources:
ls # list all projects (deprecated)
ls / # list all projects
ls . # take PROJECT/PACKAGE from current dir.
ls PROJECT # list packages in a project
ls PROJECT PACKAGE # list source files of package of a project
ls PROJECT PACKAGE <file> # list <file> if this file exists
ls -v PROJECT PACKAGE # verbosely list source files of package
ls -l PROJECT PACKAGE # verbosely list source files of package
ll PROJECT PACKAGE # verbosely list source files of package
LL PROJECT PACKAGE # verbosely list source files of expanded link
With --verbose, the following fields will be shown for each item:
MD5 hash of file
Revision number of the last commit
Size (in bytes)
Date and time of the last commit
Examples for listing binaries:
ls -b PROJECT # list all binaries of a project
ls -b PROJECT -a ARCH # list ARCH binaries of a project
ls -b PROJECT -r REPO # list binaries in REPO
ls -b PROJECT PACKAGE REPO ARCH
Usage:
list (LL, lL, ll, ls) [PROJECT [PACKAGE]]
list (LL, lL, ll, ls) -b [PROJECT [PACKAGE [REPO [ARCH]]]] Options:
-h, --help show this help message and exit
-R REVISION, --revision=REVISION
specify revision (only for sources)
-M, --meta list meta data files
-D, --deleted
show only the former deleted projects or packages
-l, --long print extra information
-v, --verbose
print extra information
-u, --unexpand
always work with unexpanded (source) packages
-e, --expand
expand linked package (only for sources)
-b, --binaries
list built binaries instead of sources
-r REPO, --repo=REPO
specify repository (only for binaries)
-a ARCH, --arch=ARCH
specify architecture (only for binaries)
localbuildlog (lbl)
Shows the build log of a local buildchroot
usage:
osc lbl [REPOSITORY ARCH]
osc lbl # show log of newest last local build
Options:
-h, --help show this help message and exit
-o OFFSET, --offset=OFFSET
get log starting from offset
log Shows the commit log of a package
Usage:
osc log (inside working copy)
osc log remote_project [remote_package]
Options:
-h, --help show this help message and exit
-M, --meta checkout out meta data instead of sources
-D, --deleted
work on deleted package
--xml generate output in XML
--csv generate output in CSV (separated by |)
-r rev, --revision=rev
show log of the specified revision
maintainer
Show maintainers of a project/package
osc maintainer PRJ <options>
osc maintainer PRJ PKG <options>
PRJ and PKG default to current working-copy path.
Usage:
osc maintainer [ARGS...]
Options:
-h, --help show this help message and exit
-r role, --role=role
Specify user role
-d user, --delete=user
delete a maintainer/bugowner (can be specified via
--role)
-a user, --add=user
add a new maintainer/bugowner (can be specified via
--role)
-D devel_project, --devel-project=devel_project
define the project where this package is primarily
developed
-v, --verbose
show more information
--nodevelproject
do not follow a defined devel project (primary project
where a package is developed)
-e, --email
show email addresses instead of user names
-B, --bugowner
Show only the bugowner if defined, or maintainer
otherwise
-b, --bugowner-only
Show only the bugowner
maintenancerequest (mr)
Create a request for starting a maintenance incident.
[See http://doc.opensuse.org/products/draft/OBS/obs-reference-guide/cha.obs.maintenance_setup.html for information on this topic.]
This command is asking the maintence team to start a maintence incident based on a created maintenance update. Please see the
"mbranch" command on how to create such a project and the "patchinfo" command how add the required maintenance update information.
usage:
osc maintenancerequest [ SOURCEPROJECT [ SOURCEPACKAGES RELEASEPROJECT ] ] Options:
-h, --help show this help message and exit
--incident-project=INCIDENT_PROJECT
specify incident project to merge in
--incident=INCIDENT
specify incident number to merge in
--no-cleanup
do not remove source project on accept
-m TEXT, --message=TEXT
specify message TEXT
-a ATTRIBUTE, --attribute=ATTRIBUTE
Use this attribute to find default maintenance project
(default is OBS:MaintenanceProject)
man generates a man page
usage:
osc man
mbranch (maintained, sm)
Search or banch multiple instances of a package
This command is used for searching all relevant instances of packages and creating links of them in one project. This is esp. used
for maintenance updates. It can also be used to branch all packages marked before with a given attribute.
[See http://en.opensuse.org/openSUSE:Build_Service_Concept_Maintenance for information on this topic.]
The branched package will live in
home:USERNAME:branches:ATTRIBUTE:PACKAGE if nothing else specified.
usage:
osc sm [SOURCEPACKAGE] [-a ATTRIBUTE]
osc mbranch [ SOURCEPACKAGE [ TARGETPROJECT ] ] Options:
-h, --help show this help message and exit
--nodevelproject
do not follow a defined devel project (primary project
where a package is developed)
--noaccess Create a hidden project
--dryrun Just simulate the action and report back the result.
-u UPDATE_ATTRIBUTE, --update-project-attribute=UPDATE_ATTRIBUTE
Use this attribute to find update projects (default is
OBS:UpdateProject)
-a ATTRIBUTE, --attribute=ATTRIBUTE
Use this attribute to find affected packages (default
is OBS:Maintained)
-c, --checkout
Checkout branched package afterwards ('osc bco' is a
shorthand for this option)
meta Show meta information, or edit it
Show or edit build service metadata of type <prj|pkg|prjconf|user|pattern>.
This command displays metadata on buildservice objects like projects, packages, or users. The type of metadata is specified by the
word after "meta", like e.g. "meta prj".
prj denotes metadata of a buildservice project. prjconf denotes the (build) configuration of a project. pkg denotes metadata of a
buildservice package. user denotes the metadata of a user. pattern denotes installation patterns defined for a project.
To list patterns, use 'osc meta pattern PRJ'. An additional argument will be the pattern file to view or edit.
With the --edit switch, the metadata can be edited. Per default, osc opens the program specified by the environmental variable EDI-
TOR with a temporary file. Alternatively, content to be saved can be supplied via the --file switch. If the argument is '-', input
is taken from stdin: osc meta prjconf home:user | sed ... | osc meta prjconf home:user -F -
When trying to edit a non-existing resource, it is created implicitly.
Examples:
osc meta prj PRJ
osc meta pkg PRJ PKG
osc meta pkg PRJ PKG -e
osc meta attribute PRJ [PKG [SUBPACKAGE]] [--attribute ATTRIBUTE] [--create|--delete|--set [value_list]]
Usage:
osc meta <prj|pkg|prjconf|user|pattern|attribute> ARGS...
osc meta <prj|pkg|prjconf|user|pattern|attribute> -e|--edit ARGS...
osc meta <prj|pkg|prjconf|user|pattern|attribute> -F|--file ARGS...
osc meta pattern --delete PRJ PATTERN Options:
-h, --help show this help message and exit
--delete delete a pattern or attribute
-s ATTRIBUTE_VALUES, --set=ATTRIBUTE_VALUES
set attribute values
-c, --create
create attribute without values
-e, --edit edit metadata
-F FILE, --file=FILE
read metadata from FILE, instead of opening an editor.
'-' denotes standard input.
-f, --force
force the save operation, allows one to ignores some
errors like depending repositories. For prj meta only.
--attribute-project
include project values, if missing in packages
--attribute-defaults
include defined attribute defaults
-a ATTRIBUTE, --attribute=ATTRIBUTE
affect only a given attribute
mkpac Create a new package under version control
usage:
osc mkpac new_package
mv Move SOURCE file to DEST and keep it under version control
Usage:
osc mv SOURCE DEST
Options:
-h, --help show this help message and exit
-f, --force
forces removal of entire package and its files
my show waiting work, packages, projects or requests involving yourself
Examples:
# list all tasks where it is expected to work on
osc my [work]
# list packages where I am bugowner
osc my pkg -b
# list projects where I am maintainer
osc my prj -m
# list request for all my projects and packages
osc my rq
# list requests, excluding project 'foo' and 'bar'
osc my rq --exclude-project foo,bar
# list submitrequests I made
osc my sr
Usage:
osc my [ARGS...]
where TYPE is one of requests, submitrequests,
projects or packages (rq, sr, prj or pkg)
Options:
-h, --help
show this help message and exit
--maintained
limit search results to packages with maintained
attribute set.
-v, --verbose
verbose listing
--exclude-project=EXCLUDE_PROJECT
exclude requests for specified project
-U USER, --user=USER
search for USER instead of yourself
-a, --all
all involvements
-m, --maintainer
restrict listing to items where the user is maintainer
-b, --bugowner
restrict listing to items where the user is bugowner
patchinfo
Generate and edit a patchinfo file.
A patchinfo file describes the packages for an update and the kind of problem it solves.
This command either creates a new _patchinfo or updates an existing one.
Examples:
osc patchinfo
osc patchinfo [PROJECT [PATCH_NAME]] Options:
-h, --help show this help message and exit
-f, --force
force generation of new patchinfo file, do not update
existing one.
pdiff Quick alias to diff the content of a package with its parent.
Usage:
osc pdiff [--plain|-p] [--nomissing-ok|-n]
osc pdiff [--plain|-p] [--nomissing-ok|-n] PKG
osc pdiff [--plain|-p] [--nomissing-ok|-n] PRJ PKG
Options:
-h, --help show this help message and exit
-n, --nomissingok
fail if the parent package does not exist on the
server
-p, --plain
output the diff in plain (not unified) diff format
prjresults (pr)
Shows project-wide build results
Usage:
osc prjresults (inside working copy)
osc prjresults PROJECT
Options:
-h, --help show this help message and exit
--show-excluded
show packages that are excluded in all repos, also
hide repos that have only excluded packages
-V, --vertical
list packages vertically instead horizontally
-r REPO, --repo=REPO
show results only for specified repo(s)
-a ARCH, --arch=ARCH
show results only for specified architecture(s)
-n EXPR, --name-filter=EXPR
show only packages whose names match EXPR
-s STATUS, --status-filter=STATUS
show only packages with buildstatus STATUS (see
legend)
-c, --csv csv output
-q, --hide-legend
hide the legend
pull merge the changes of the link target into your working copy.
rdelete
Delete a project or packages on the server.
As a safety measure, project must be empty (i.e., you need to delete all packages first). Also, packages must have no requests pend-
ing (i.e., you need to accept/revoke such requests first). If you are sure that you want to remove this project and all its pack-
ages use '--recursive' switch. It may still not work because other depends on it. If you want to ignore this as well use '--force'
switch.
usage:
osc rdelete [-r] [-f] PROJECT [PACKAGE]
Options:
-h, --help show this help message and exit
-m TEXT, --message=TEXT
specify log message TEXT
-f, --force
deletes a project where other depends on
-r, --recursive
deletes a project with packages inside
rdiff Server-side "pretty" diff of two packages
Compares two packages (three or four arguments) or shows the changes of a specified revision of a package (two arguments)
If no revision is specified the latest revision is used.
Note that this command doesn't return a normal diff (which could be applied as patch), but a "pretty" diff, which also compares the
content of tarballs.
usage:
osc rdiff OLDPRJ OLDPAC NEWPRJ [NEWPAC]
osc rdiff PROJECT PACKAGE Options:
-h, --help show this help message and exit
-u, --unexpand
diff unexpanded version if sources are linked
--missingok
do not fail if the source or target project/package
does not exist on the server
-c rev, --change=rev
the change made by revision rev (like -r rev-1:rev).
If rev is negative this is like -r rev:rev-1.
-p, --plain
output the diff in plain (not unified) diff format
-r N[:M], --revision=N[:M]
revision id, where N = old revision and M = new
revision
-M, --meta diff meta data
--oldpkg=OLDPKG
package to compare against (deprecated, use 3 argument
form)
--oldprj=OLDPRJ
project to compare against (deprecated, use 3 argument
form)
rebuild (rebuildpac)
Trigger package rebuilds
Note that it is normally NOT needed to kick off rebuilds like this, because they principally happen in a fully automatic way, trig-
gered by source check-ins. In particular, the order in which packages are built is handled by the build service.
The arguments REPOSITORY and ARCH can be taken from the first two columns of the 'osc repos' output.
usage:
osc rebuild [PROJECT [PACKAGE [REPOSITORY [ARCH]]]] Options:
-h, --help show this help message and exit
--all Rebuild all packages of entire project
-f, --failed
rebuild all failed packages
-r REPO, --repo=REPO
trigger rebuilds for a specific repository
-a ARCH, --arch=ARCH
trigger rebuilds for a specific architecture
releaserequest
Create a request for releasing a maintenance update.
[See http://doc.opensuse.org/products/draft/OBS/obs-reference-guide/cha.obs.maintenance_setup.html
for information on this topic.]
This command is used by the maintence team to start the release process of a maintenance update. This includes usually testing
based on the defined reviewers of the update project.
usage:
osc releaserequest [ SOURCEPROJECT ]
Options:
-h, --help show this help message and exit
-m TEXT, --message=TEXT
specify message TEXT
remotebuildlog (rbl, rblt, rbuildlog, rbuildlogtail, remotebuildlogtail)
Shows the build log of a package
Shows the log file of the build of a package. Can be used to follow the log while it is being written.
remotebuildlogtail shows just the tail of the log file.
usage:
osc remotebuildlog project package repository arch
or
osc remotebuildlog project/package/repository/arch
or
osc remotebuildlog buildlogurl Options:
-h, --help show this help message and exit
-o OFFSET, --offset=OFFSET
get log starting or ending from the offset
repairlink
Repair a broken source link
This command checks out a package with merged source changes. It uses a 3-way merge to resolve file conflicts. After review-
ing/repairing the merge, use 'osc resolved ...' and 'osc ci' to re-create a working source link.
usage: * For merging conflicting changes of a checkout package:
osc repairlink
* Check out a package and merge changes:
osc repairlink PROJECT PACKAGE
* Pull conflicting changes from one project into another one:
osc repairlink PROJECT PACKAGE INTO_PROJECT [INTO_PACKAGE]
Options:
-h, --help show this help message and exit
-d DIR, --destdir=DIR
destination directory
repairwc
try to repair an inconsistent working copy
Examples:
osc repairwc <path>
Note: if <path> is omitted it defaults to '.' (<path> can be
a project or package working copy)
Warning: This command might delete some files in the storedir (.osc). Please check the state of the wc afterwards (via 'osc sta-
tus').
Usage:
osc repairwc [ARGS...]
Options:
-h, --help show this help message and exit
--force-apiurl
ask once for an apiurl and force this apiurl for all
inconsistent projects/packages
repositories (platforms, repos)
shows repositories configured for a project.
It skips repositories by default which are disabled for a given package.
usage:
osc repos
osc repos [PROJECT] [PACKAGE]
repourls
Shows URLs of .repo files
Shows URLs on which to access the project .repos files (yum-style metadata) on download.opensuse.org.
usage:
osc repourls [PROJECT]
request (review, rq)
Show or modify requests and reviews
[See http://en.opensuse.org/openSUSE:Build_Service_Collaboration for information on this topic.]
The 'request' command has the following sub commands:
"list" lists open requests attached to a project or package or person. Uses the project/package of the current directory if none of
-M, -U USER, project/package are given.
"log" will show the history of the given ID
"show" will show the request itself, and generate a diff for review, if used with the --diff option. The keyword show can be omitted
if the ID is numeric.
"decline" will change the request state to "declined"
"reopen" will set the request back to new or review.
"setincident" will direct "maintenance" requests into specific incidents
"supersede" will supersede one request with another existing one.
"revoke" will set the request state to "revoked"
"accept" will change the request state to "accepted" and will trigger the actual submit process. That would normally be a server-
side copy of the source package to the target package.
"checkout" will checkout the request's source package ("submit" requests only).
The 'review' command has the following sub commands:
"list" lists open requests that need to be reviewed by the specified user or group
"add" adds a person or group as reviewer to a request
"accept" mark the review positive
"decline" mark the review negative. A negative review will decline the request.
usage:
osc request list [-M] [-U USER] [-s state] [-D DAYS] [-t type] [-B] [PRJ [PKG]]
osc request log ID
osc request [show] [-d] [-b] ID
osc request accept [-m TEXT] ID
osc request decline [-m TEXT] ID
osc request revoke [-m TEXT] ID
osc request reopen [-m TEXT] ID
osc request setincident [-m TEXT] ID INCIDENT
osc request supersede [-m TEXT] ID SUPERSEDING_ID
osc request approvenew [-m TEXT] PROJECT
osc request checkout/co ID
osc request clone [-m TEXT] ID
osc review show [-d] [-b] ID
osc review list [-U USER] [-G GROUP] [-P PROJECT [-p PACKAGE]] [-s state]
osc review add [-m TEXT] [-U USER] [-G GROUP] [-P PROJECT [-p PACKAGE]] ID
osc review accept [-m TEXT] [-U USER] [-G GROUP] [-P PROJECT [-p PACKAGE]] ID
osc review decline [-m TEXT] [-U USER] [-G GROUP] [-P PROJECT [-p PACKAGE]] ID
osc review reopen [-m TEXT] [-U USER] [-G GROUP] [-P PROJECT [-p PACKAGE]] ID
osc review supersede [-m TEXT] [-U USER] [-G GROUP] [-P PROJECT [-p PACKAGE]] ID SUPERSEDING_ID
Options:
-h, --help show this help message and exit
--source-buildstatus
print the buildstatus of the source package (only
works with "show")
--involved-projects
show all requests for project/packages where USER is
involved
--exclude-target-project=EXCLUDE_TARGET_PROJECT
exclude target project from request list
--non-interactive
non-interactive review of request
-i, --interactive
interactive review of request
-e, --edit edit a submit action
-B, --bugowner
also show requests about packages where I am bugowner
-M, --mine only show requests created by yourself
-b, --brief
print output in list view as list subcommand
-p PACKAGE, --package=PACKAGE
requests or reviews limited for the specified PACKAGE,
requires also a PROJECT
-P PROJECT, --project=PROJECT
requests or reviews limited for the specified PROJECT
-G GROUP, --group=GROUP
requests or reviews limited for the specified GROUP
-U USER, --user=USER
requests or reviews limited for the specified USER
-D DAYS, --days=DAYS
only list requests in state "new" or changed in the
last DAYS. [default=0]
-s STATE, --state=STATE
only list requests in one of the comma separated given
states (new/review/accepted/revoked/declined) or "all"
[default="new,review", or "all", if no args given]
-f, --force
enforce state change, can be used to ignore open
reviews
-a, --all all states. Same as'-s all'
-t TYPE, --type=TYPE
limit to requests which contain a given action type
(submit/delete/change_devel)
-m TEXT, --message=TEXT
specify message TEXT
-u, --unified
output the diff in the unified diff format
-d, --diff generate a diff
requestmaintainership (reqbs, reqbugownership, reqmaintainership, reqms, requestbugownership)
requests to add user as maintainer or bugowner
usage:
osc requestmaintainership # for current user in checked out package
osc requestmaintainership USER # for specified user in checked out package
osc requestmaintainership PROJECT PACKAGE # for current user
osc requestmaintainership PROJECT PACKAGE USER # request for specified user
osc requestbugownership ... # accepts same parameters but uses bugowner role
Options:
-h, --help show this help message and exit
-r role, --role=role
specify user role (default: maintainer)
-m TEXT, --message=TEXT
specify message TEXT
resolved
Remove 'conflicted' state on working copy files
If an upstream change can't be merged automatically, a file is put into in 'conflicted' ('C') state. Within the file, conflicts are
marked with special <<<<<<< as well as ======== and >>>>>>> lines.
After manually resolving all conflicting parts, use this command to remove the 'conflicted' state.
Note: this subcommand does not semantically resolve conflicts or remove conflict markers; it merely removes the conflict-related
artifact files and allows PATH to be committed again.
usage:
osc resolved FILE [FILE...]
results (r)
Shows the build results of a package or project
Usage:
osc results # (inside working copy of PRJ or PKG)
osc results PROJECT [PACKAGE]
Options:
-h, --help show this help message and exit
--format=FORMAT
format string for csv output
--csv generate output in CSV format
--xml generate output in XML (former results_meta)
-w, --watch
watch the results until all finished building
-v, --verbose
more verbose output
-a ARCH, --arch=ARCH
Show results only for specified architecture(s)
-r REPO, --repo=REPO
Show results only for specified repo(s)
-l, --last-build
show last build results (succeeded/failed/unknown)
revert Restore changed files or the entire working copy.
Examples:
osc revert <modified file(s)>
ose revert . Note: this only works for package working copies
Usage:
osc revert [FILES...]
rremove
Remove source files from selected package
Usage:
osc rremove PROJECT PACKAGE [FILES...]
Options:
-h, --help show this help message and exit
-f, --force
Don't ask and delete files
search (bse, se)
Search for a project and/or package.
If no option is specified osc will search for projects and packages which contains the 'search term' in their name, title or
description.
usage:
osc search 'search term' <options>
osc bse ... ('osc search --binary')
osc se 'perl(Foo::Bar)' ('osc --package perl-Foo-Bar') Options:
-h, --help show this help message and exit
--binaryversion=VERSION
search for binary with specified version (implies
--binary)
-B PROJECT, --baseproject=PROJECT
search packages built for PROJECT (implies --binary)
--binary search binary packages
--csv generate output in CSV (separated by |)
-M, --mine shorthand for --bugowner --package
--maintained
limit search results to packages with maintained
attribute set.
-m, --maintainer
as -i, but only maintainer
-b, --bugowner
as -i, but only bugowner
-i, --involved
show projects/packages where given person (or myself)
is involved as bugowner or maintainer
-V, --version
show package version, revision, and srcmd5. CAUTION:
This is slow and unreliable
-v, --verbose
show more information
-a ATTRIBUTE, --limit-to-attribute=ATTRIBUTE
match only when given attribute exists in meta data
--description
search for matches in the 'description' element
--title search for matches in the 'title' element
--project search for a project
--package search for a package
-s, --substring
Show also results where the search term is a sub
string, slower search
-e, --exact
show only exact matches, this is default now
--repos-baseurl
show base URLs of download repositories
service
Handle source services
Source services can be used to modify sources like downloading files, verify files, generating files or modify existing files.
usage:
osc service COMMAND (inside working copy)
osc service run [SOURCE_SERVICE]
osc service disabledrun
osc service remoterun [PROJECT PACKAGE]
COMMAND can be:
run r run defined services locally, it takes an optional parameter to run only a
specified source service. In case paramteres exists for this one in _service file
they are used.
disabledrun dr run disabled or server side only services locally and store files as local created
remoterun rr trigger a re-run on the server side
setlinkrev
Updates a revision number in a source link.
This command adds or updates a specified revision number in a source link. The current revision of the source is used, if no revi-
sion number is specified.
usage:
osc setlinkrev
osc setlinkrev PROJECT [PACKAGE] Options:
-h, --help show this help message and exit
-u, --unset
remove revision in link, it will point always to
latest revision
-R, --use-plain-revision
Don't expand revsion based on baserev, the revision
which was used when commit happened.
-r rev, --revision=rev
use the specified revision.
signkey
Manage Project Signing Key
osc signkey [--create|--delete|--extend] <PROJECT> osc signkey [--notraverse] <PROJECT>
This command is for managing gpg keys. It shows the public key by default. There is no way to download or upload the private part of
a key by design.
However you can create a new own key. You may want to consider to sign the public key with your own existing key.
If a project has no key, the key from upper level project will be used (eg. when dropping "KDE:KDE4:Community" key, the one from
"KDE:KDE4" will be used).
WARNING: THE OLD KEY WILL NOT BE RESTORABLE WHEN USING DELETE OR CREATE
Usage:
osc signkey [ARGS...]
Options:
-h, --help show this help message and exit
--notraverse
don' traverse projects upwards to find key
--delete delete the gpg signing key in this project
--extend extend expiration date of the gpg public key for this
project
--create create new gpg signing key for this project
status (st)
Show status of files in working copy
Show the status of files in a local working copy, indicating whether files have been changed locally, deleted, added, ...
The first column in the output specifies the status and is one of the following characters:
' ' no modifications
'A' Added
'C' Conflicted
'D' Deleted
'M' Modified
'?' item is not under version control
'!' item is missing (removed by non-osc command) or incomplete
examples:
osc st
osc st <directory>
osc st file1 file2 ...
usage:
osc status [OPTS] [PATH...] Options:
-h, --help show this help message and exit
-e, --show-excluded
also show files which are excluded by the
"exclude_glob" config option
-v, --verbose
print extra information
-q, --quiet
print as little as possible
submitrequest (sr, submitpac, submitreq)
Create request to submit source into another Project
[See http://en.opensuse.org/openSUSE:Build_Service_Collaboration for information on this topic.]
See the "request" command for showing and modifing existing requests.
usage:
osc submitreq [OPTIONS]
osc submitreq [OPTIONS] DESTPRJ [DESTPKG]
osc submitreq [OPTIONS] SOURCEPRJ SOURCEPKG DESTPRJ [DESTPKG]
osc submitpac ... is a shorthand for osc submitreq --cleanup ...
Options:
-h, --help show this help message and exit
--yes proceed without asking.
-d, --diff show diff only instead of creating the actual request
--no-update
never touch source package on accept (will break
source links)
--no-cleanup
never remove source package on accept, but update its
content
--cleanup remove package if submission gets accepted (default
for home:<id>:branch projects)
--nodevelproject
do not follow a defined devel project (primary project
where a package is developed)
-s SUPERSEDE, --supersede=SUPERSEDE
Superseding another request by this one
-r REV, --revision=REV
specify a certain source revision ID (the md5 sum) for
the source package
-m TEXT, --message=TEXT
specify message TEXT
triggerreason (tr)
Show reason why a package got triggered to build
The server decides when a package needs to get rebuild, this command shows the detailed reason for a package. A brief reason is also
stored in the jobhistory, which can be accessed via "osc jobhistory".
Trigger reasons might be:
- new build (never build yet or rebuild manually forced)
- source change (eg. on updating sources)
- meta change (packages which are used for building have changed)
- rebuild count sync (In case that it is configured to sync release numbers)
usage in package or project directory:
osc reason REPOSITORY ARCH
osc reason PROJECT PACKAGE REPOSITORY ARCH
undelete
Restores a deleted project or package on the server.
The server restores a package including the sources and meta configuration. Binaries remain to be lost and will be rebuild.
usage:
osc undelete PROJECT
osc undelete PROJECT PACKAGE [PACKAGE ...]
Options:
-h, --help show this help message and exit
-m TEXT, --message=TEXT
specify log message TEXT
unlock Unlocks a project or package
Unlocks a locked project or package. A comment is required.
usage:
osc unlock PROJECT [PACKAGE]
Options:
-h, --help show this help message and exit
-m TEXT, --message=TEXT
specify log message TEXT
update (up)
Update a working copy
examples:
1. osc up
If the current working directory is a package, update it.
If the directory is a project directory, update all contained
packages, AND check out newly added packages.
To update only checked out packages, without checking out new
ones, you might want to use "osc up *" from within the project
dir.
2. osc up PAC
Update the packages specified by the path argument(s)
When --expand-link is used with source link packages, the expanded sources will be checked out. Without this option, the _link file
and patches will be checked out. The option --unexpand-link can be used to switch back to the "raw" source with a _link file plus
patch(es).
Usage:
osc update [ARGS...]
Options:
-h, --help show this help message and exit
-l limit_size, --limit-size=limit_size
Skip all files with a given size
-S, --server-side-source-service-files
Use server side generated sources instead of local
generation.
-s, --source-service-files
Run local source services after update.
-e, --expand-link
if a package is a link, update to the expanded sources
-u, --unexpand-link
if a package is an expanded link, update to the raw
_link file
-r REV, --revision=REV
update to specified revision (this option will be
ignored if you are going to update the complete
project or more than one package)
updatepacmetafromspec (metafromspec)
Update package meta information from a specfile
ARG, if specified, is a package working copy.
Usage:
osc updatepacmetafromspec [ARGS...]
Options:
-h, --help show this help message and exit
--specfile=FILE
Path to specfile. (if you pass more than working copy
this option is ignored)
vc Edit the changes file
osc vc [-m MESSAGE|-e] [filename[.changes]|path [file_with_comment]] If no <filename> is given, exactly one *.changes or *.spec file
has to be in the cwd or in path.
The email address used in .changes file is read from BuildService instance, or should be defined in ~/.oscrc [https://api.open-
suse.org/] user = login pass = password email = user@defined.email
or can be specified via mailaddr environment variable.
Usage:
osc vc [ARGS...]
Options:
-h, --help show this help message and exit
-e, --just-edit
just open changes (cannot be used with -m)
-m MESSAGE, --message=MESSAGE
add MESSAGE to changes (not open an editor)
whois (user, who)
Show fullname and email of a buildservice user
Usage:
osc whois [USERNAMES...]
wipebinaries
Delete all binary packages of a certain project/package
With the optional argument <package> you can specify a certain package otherwise all binary packages in the project will be deleted.
usage:
osc wipebinaries OPTS # works in checked out project dir
osc wipebinaries OPTS PROJECT [PACKAGE] Options:
-h, --help show this help message and exit
--all Delete all binaries regardless of the package status
(previously default)
--unresolvable
Delete all binaries of packages which have dependency
errors
--broken Delete all binaries of packages for which the package
source is bad
--build-failed
Delete all binaries of packages for which the build
failed
--build-disabled
Delete all binaries of packages for which the build is
disabled
-r REPO, --repo=REPO
Delete all binary packages for a specific repository
-a ARCH, --arch=ARCH
Delete all binary packages for a specific architecture
GLOBAL OPTIONS
Options:
--version show program's version number and exit
-h, --help show this help message and exit
--debugger jump into the debugger before executing anything
--post-mortem jump into the debugger in case of errors
-t, --traceback print call trace in case of errors
-H, --http-debug debug HTTP traffic (filters some headers)
--http-full-debug debug HTTP traffic (filters no headers)
-d, --debug print info useful for debugging
-A URL/alias, --apiurl=URL/alias
specify URL to access API server at or an alias
-c FILE, --config=FILE
specify alternate configuration file
--no-keyring disable usage of desktop keyring system
--no-gnome-keyring disable usage of GNOME Keyring
-v, --verbose increase verbosity
-q, --quiet be quiet, not verbose
SEE ALSO
Type 'osc help <subcommand>' for more detailed help on a specific subcommand.
For additional information, see
* http://en.opensuse.org/openSUSE:Build_Service_Tutorial
* http://en.opensuse.org/openSUSE:OSC
You can modify osc commands, or roll you own, via the plugin API:
* http://en.opensuse.org/openSUSE:OSC_plugins
AUTHOR
osc was written by several authors. This man page is automatically generated.
osc 0.134.1 Jun 2012 OSC(1)