MIVIEW(1) User Commands MIVIEW(1)
NAME
miview - Viewer for medical image files
SYNOPSIS
miview [ options ] <image-file>
DESCRIPTION
miview: Viewer for medical image files
File formats are automatically identified by their file extension.
Global options:
-blowup: Enlarge display size by this factor (default=1)
-bright: Relative brightness of display (default=0.0)
-color: Use color map to display values
-contrast: Relative contrast of display (default=0.0)
-dump: Dump all images as bitmap(bmp) files and exit, use the given filename prefix
-low: Lower windowing boundary: This value will appear black in display
-map: Load overlay map (colored voxels superimposed on image) from this file
-maplegend: Export map legend as bitmap to this file
-maplow: Lower windowing boundary for overlay map (default=0.0)
-maprect: Relative size of rectangles which represent voxels of the overlay map (default=0.60)
-mapupp: Upper windowing boundary for overlay map (default=0.0)
-noscale: Disable scale in 2D/3D display
-rec: Record clicked coordinates and values into this file
-upp: Upper windowing boundary: This value will appear white in display
-val: Save value of ROI/point selection to this file
-v <loglevel> or <component:loglevel> for debugging/tracing all components or a single component, respectively. Possible values for
loglevel are: 0(noLog), 1(errorLog), 2(warningLog), 3(infoLog).
fMRI options (Give at least -design and -fmri to activate):
-bonferr: Use Bonferroni correction
-corr: Error probability threshold for correlation (default=0.050)
-davg: Smooth the design function using a moving average filter of width N (TR) (default=0)
-design: Load fMRI design from this file (comma or space separated)
-fmask: fMRI mask file
-fmri: Load fMRI data from this file
-hrf: Convolve design function by hemodynamic response function prior to correlation (see Glover NeuroImage 9, 416-429)
-neighb: Minimum next neighbours with significant activation (default=1)
-scourse: Dump relative fMRI signal change time course to this file
-smap: Dump map of relative fMRI signal change to this file
-zmap: Dump z-score map to this file
-zscore: z-Score threshold for correlation (default=0.0)
File read options:
-date: Date of scan [yyyymmdd] (default=20120328yyyymmdd)
-fp: FOV in phase direction [mm] (default=220.0mm)
-fr: FOV in read direction [mm] (default=220.0mm)
-fs: FOV in slice direction [mm] (default=5.0mm)
-nr: Number of consecutive measurements (default=1)
-nx: Number of points in read direction (default=1)
-ny: Number of points in phase direction (default=1)
-nz: Number of points in slice direction (default=1)
-pbirth: Patients date of birth [yyyymmdd] (default=00000000yyyymmdd)
-pid: Unique patient identifier (default=Unknown)
-pname: Full patient name (default=Unknown)
-psex: Patients sex (options=M F O , default=O)
-pweight: Patients weight [kg] (default=50.0kg)
-scient: Scientist Name (default=Unknown)
-sd: Inter-slice distance (from center to center) [mm] (default=10.0mm)
-serd: Series Description (default=Unknown)
-serno: Series Number (default=1)
-st: Slice thickness [mm] (default=5.0mm)
-stud: Study Description (default=Unknown)
-tcname: Name of transmit coil (default=Unknown)
-te: Time-to-echo of the sequence [ms] (default=80.0ms)
-time: Time of scan [hhmmss] (default=165543hhmmss)
-tr: Time between consecutive excitations [ms] (default=1000.0ms)
-cplx: Treat data as complex and extract the given component (options=none abs pha real imag , default=none)
-ds: Dataset index to extract if multiple datasets are read
-filter: Read only those datasets which protocol parameter 'key' contains the string 'value' (given in the format 'key=value')
-fmap: For reduced memory usage, keep filemapping after reading (raw) data, but writing into the array will result in a crash
-jdx: If multiple JDX arrays are present, select this
-rdialect: Read data using given dialect of the format. (default is no dialect)
-rf: Read format, use it to override file extension (options=autodetect 3db asc coi dat dcm double float gz hdr idx ima jdx mag mhd nii ph
png pos pro reg s16bit s32bit s8bit smp u16bit u32bit u8bit vtk , default=autodetect)
-skip: Skip this amount of bytes before reading the raw data (default=0)
Filters:
-align <filename,In-plane blowup factor> : Align data to the geometry (voxel locations) of an external file
-automask : Create mask using automatic histogram-based threshold
-detrend <Number of low frequency components to be removed,Zero mean of resulting timecourse> : Remove slow drift over time
-genmask <lower threshold,upper threshold> : Create mask including all voxels with value in given range
-isotrop <voxelsize> : make image voxels isotrop through interpolation (image geometry will not change)
-lowpass <Cut-off frequency [Hz]> : Lowpass filtering
-max <Maximum value> : Clip all values above maximum value
-maxip <direction (time slice phase read none )> : Perform maximum intensity projection over given direction
-merge : Merge datasets into a single dataset by expanding the time dimension
-min <Minumum value> : Clip all values below mininum value
-minip <direction (time slice phase read none )> : Perform minimum intensity projection over given direction
-noNaN <Replacement value> : Replaces every NaN by the given value
-pflip : Flip data in phase direction
-prange <Single value or range, optionally with increment (e.g. 1-10:3)> : Select range in phase direction
-proj <direction (time slice phase read none )> : Perform projection over given direction
-quantilmask <quantil> : Create mask including all voxels above the given fractional threshold
-resample <new size> : Temporal resize of image data
-resize <slice-size,phase-size,read-size> : Spatial resize of image data
-reslice <requested orientation (sagittal coronal axial )> : reslices the image to a given orientation
-rflip : Flip data in read direction
-rot <angle [deg],kernel size [pixel]> : In-plane rotation
-rrange <Single value or range, optionally with increment (e.g. 1-10:3)> : Select range in read direction
-scale <Slope,Offset> : Rescale image values
-sflip : Flip data in slice direction
-shift <readDirection shift [pixel],phaseDirection shift [pixel],sliceDirection shift [pixel]> : Shift data spatially
-splice <dimension of the data to be spliced (time slice phase read none )> : splices the image in the given direction
-srange <Single value or range, optionally with increment (e.g. 1-10:3)> : Select range in slice direction
-swapdim <[rps][-],[rps][-],[rps][-]> : swap/reflect dimensions by specifying a direction triple with optional reflection sign appended
-tile <columns> : Combine slices into a square 2D image
-trange <Single value or range, optionally with increment (e.g. 1-10:3)> : Select range in time direction
-typemax <Datatype> : Clip all values above maximum of a specific datatype
-typemin <Datatype> : Clip all values below mininum of a specific datatype
-usemask <filename> : Create 1D dataset including all values within mask from file
Supported file extensions(formats):
3db (Iris3D binary data)
asc (ASCII, dialects: tcourse )
coi (JCAMP-DX data sets)
dat (Matlab ascii 2D data matrix)
dcm (DICOM, dialects: siemens )
double (double raw data)
float (float raw data)
gz (GNU-Zip container for other formats)
hdr (NIFTI/ANALYZE, dialects: fsl )
idx (3D-indices of non-zeroes in ASCII)
ima (DICOM, dialects: siemens )
jdx (JCAMP-DX image format)
mag (DICOM, dialects: siemens )
mhd (MetaImage)
nii (NIFTI/ANALYZE, dialects: fsl )
ph (DICOM, dialects: siemens )
png (Portable Network Graphics)
pos (x-y positions of non-zeroes in ASCII)
pro (ODIN measurement protocols)
reg (Ansoft HFSS ASCII)
s16bit (signed 16 bit raw data)
s32bit (signed 32 bit raw data)
s8bit (signed 8 bit raw data)
smp (JCAMP-DX data sets)
u16bit (unsigned 16 bit raw data)
u32bit (unsigned 32 bit raw data)
u8bit (unsigned 8 bit raw data)
vtk (Visualization Toolkit)
miview 1.8.5 March 2012 MIVIEW(1)