I810SWITCH(1) General Commands Manual I810SWITCH(1)NAME
i810switch - enable/disable screen output on i810 video hardware
SYNOPSIS
i810switch [ crt [ on | off ] ] [ lcd [ on | off ] ]
DESCRIPTION
This manual page documents briefly the i810switch, command. This manual page was written for the Debian GNU/Linux distribution because the
original program does not have a manual page.
i810switch is a program that enables/disables the output to the CRT display and LCD, depending on the i810 graphics controller hardware.
With no options, it displays the current output status.
OPTIONS
A summary of options are included below.
lcd [ on | off ]
Turn the main LCD display on or off.
crt [ on | off ]
Turn the external video display on or off.
SEE ALSO sonypi(1)AUTHOR
i810switch was written by mano <mano@ac3.mopera.ne.jp> and Antonino Daplas <adaplas@pol.net>. This manual page was written by James
Bromberger <jeb@debian.org>, for the Debian GNU/Linux system (but may be used by others).
I810SWITCH(1)
Check Out this Related Man Page
WMBUBBLE(1x)WMBUBBLE(1x)NAME
wmbubble - system load monitor
SYNOPSIS
wmbubble [options] [program1] [program2]
DESCRIPTION
This manual page documents briefly the wmbubble command. This manual page was written for the Debian GNU/Linux distribution because the
original program does not have a manual page.
wmbubble is a dockapp-style CPU, memory, swap and load average monitor. Based on the GNOME BubbleMon applet, this program has been consid-
erably improved.
The higher the water level, the more memory is in use. The more profuse the bubbles, the higher the CPU usage. There is also a real-time
CPU percentage display.
When the mouse is moved into the window, the display will change to show the load history, or, if the right shift is held, the current mem-
ory usage. If you press the right mouse button, the window will freeze in that state. You can unfreeze the display by pressing the right
mouse button again.
program1 and program2 are the programs to spawn when either the left or middle mouse button is pressed, respectively.
OPTIONS -d disable swimming duck
-u disable upside-down duck
-c disable CPU meter
-m disable memory screen
-p use alternative color scheme in memory info screen
-k display memory and swap statistics in megabytes
-h display help
AUTHOR
wmbubble was written by timecop <timecop@japan.co.jp>
This manual page was written by John H. Robinson, IV <jaqque@debian.org>, for the Debian GNU/Linux system (but may be used by others).
March 28, 2004 WMBUBBLE(1x)
I have a huge matrix file containing some 1.5 million rows and 6000 columns. The matrix looks something like this:
1 2 3
4 5 6
7 8 9
3 4 5
I want to add all the numbers in the columns of this matrix and display the result to my stdout. This means that the numbers in the first column are:
... (2 Replies)
Hi,
Just trying to get to grips with sed and awk for some reporting for work and I need some assistance:
I have a file that lists policy names on the first line and then on the second line whether the policy is active or not.
Policy Name: Policy1
Active: yes
Policy... (8 Replies)
version info :
vi availabe with RHEL 5.4
I have a text file with 10,000 lines. I want to copy lines from 5000th line to 7000th and redirect to a file. Any idea how I can do this?
Note:
The above scenario is just an example. In my actual requirement, the file has 14 million lines and I want... (9 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hello,
I couldn't find an actual introduction thread, so I decided to just put this here.
I go by d0wngrade online. I have been programming in multiple languages for about 15+ years. I started with standard web design languages like HTML and CSS, but I then advanced from design to development... (2 Replies)
Hi guys...
The first active code line in AudioScope.sh is set -u .
This causes a complete exit if a variable is used/found but has not been allocated at the start of the program.
However, apart from writing code to do the task, is there a switch to to check which variables have been... (17 Replies)
Hi.
In thread https://www.unix.com/shell-programming-and-scripting/267833-grouping-counting.html rovf and I had a mini-discussion on grep and awk.
Here is a demo script that compares the awk and grep approaches for this single problem:
#!/usr/bin/env bash
# @(#) s2 Demonstrate group... (1 Reply)
Hello,
I have to fish out some specific columns from a file based on the header value. I have the list of columns I need in a different file. I thought I could read in the list of headers I need,
# file with header names of required columns in required order
headers_file=$2
# read contents... (11 Replies)
For those interested in installing dash shell on OSX Lion to help test POSIX compliancy of shell scripts, it is quite easy. I did it like this:
If you don't have gcc on your system:
0. Download and install the Command Line Tools for Xcode package from Sign In - Apple *
1. Download the dash... (2 Replies)
Hello and thanks in advance for any help anyone can offer me
I'm trying to learn the find command and thought I was understanding it... Apparently I was wrong. I was doing compound searches and I started getting weird results with the -size test. I was trying to do a search on a 1G file owned by... (14 Replies)
I have data of an excel files as given below,
file1
org1_1 1 1 2.5 100
org1_2 1 2 5.5 98
org1_3 1 3 7.2 88
file2
org2_1 1 1 2.5 100
org2_2 1 2 5.5 56
org2_3 1 3 7.2 70
I have multiple excel files as above shown.
I have to copy column 1, column 4 and paste into a new excel file as... (26 Replies)
Dear All,
Taking a break from Vue.js coding for the site, SEO and YT videos; and hopefully addressing some well deserved criticism from some here that I have been too focused on the visual aspects of the forums versus the substance and the community....
While the "current generation... (9 Replies)
Hi all...
Well guys and gals, I jumped in at the deep end and found things that PERL cannot do by default.
Many tricky terminal escape codes are not catered for so I had to create workarounds.
One thing I searched for was this:
Passing perl variable to shell command
AND, @Neo this was... (15 Replies)