VISUALBOYADVANCE(1) User Commands VISUALBOYADVANCE(1)NAME
VisualBoyAdvance - VisualBoyAdvance-GTK
SYNOPSIS
gvba [option ...] [file]
OPTIONS --help Output this help.
-V, --version
Output version information.
SEE ALSO
The full documentation for VisualBoyAdvance is maintained as a Texinfo manual. If the info and VisualBoyAdvance programs are properly
installed at your site, the command
info VisualBoyAdvance
should give you access to the complete manual.
VisualBoyAdvance version 1.8.0 [GTK+] May 2007 VISUALBOYADVANCE(1)
Check Out this Related Man Page
VISUALBOYADVANCE(1) User Commands VISUALBOYADVANCE(1)NAME
VisualBoyAdvance - VisualBoyAdvance
DESCRIPTION
VisualBoyAdvance [option ...] file
OPTIONS -1, --video-1x
1x
-2, --video-2x
2x
-3, --video-3x
3x
-4, --video-4x
4x
-F, --fullscreen
Full screen
-G, --gdb=PROTOCOL
GNU Remote Stub mode: tcp - use TCP at port 55555 tcp:PORT - use TCP at port PORT pipe - use pipe transport
-N, --no-debug
Don't parse debug information
-S, --flash-size=SIZE
Set the Flash size
--flash-64k
0 - 64K Flash
--flash-128k
1 - 128K Flash
-T, --throttle=THROTTLE
Set the desired throttle (5...1000)
-Y, --yuv=TYPE
Use YUV overlay for drawing: 0 - YV12 1 - UYVY 2 - YVYU 3 - YUY2 4 - IYUV
-b, --bios=BIOS
Use given bios file
-c, --config=FILE
Read the given configuration file
-d, --debug
Enter debugger
-f, --filter=FILTER
Select filter:
--filter-normal
0 - normal mode
--filter-tv-mode
1 - TV Mode
--filter-2xsai
2 - 2xSaI
--filter-super-2xsai
3 - Super 2xSaI
--filter-super-eagle
4 - Super Eagle
--filter-pixelate
5 - Pixelate
--filter-motion-blur
6 - Motion Blur
--filter-advmame
7 - AdvanceMAME Scale2x
--filter-simple2x
8 - Simple2x
--filter-bilinear
9 - Bilinear
--filter-bilinear+
10 - Bilinear Plus
--filter-scanlines
11 - Scanlines
--filter-hq2x
12 - hq2x
--filter-lq2x
13 - lq2x
-h, --help
Print this help
-i, --ips=PATCH
Apply given IPS patch
-p, --profile=[HERTZ]
Enable profiling
-s, --frameskip=FRAMESKIP
Set frame skip (0...9)
-t, --save-type=TYPE
Set the available save type
--save-auto
0 - Automatic (EEPROM, SRAM, FLASH)
--save-eeprom
1 - EEPROM
--save-sram
2 - SRAM
--save-flash
3 - FLASH
--save-sensor
4 - EEPROM+Sensor
--save-none
5 - NONE
-v, --verbose=VERBOSE
Set verbose logging (trace.log) 1 - SWI 2 - Unaligned memory access 4 - Illegal memory write 8 - Illegal memory read
16 - DMA 0 32 - DMA 1 64 - DMA 2
128 - DMA 3 256 - Undefined instruction 512 - AGBPrint messages
Long options only:
--agb-print
Enable AGBPrint support
--auto-frameskip
Enable auto frameskipping
--ifb-none
No interframe blending
--ifb-motion-blur
Interframe motion blur
--ifb-smart
Smart interframe blending
--no-agb-print
Disable AGBPrint support
--no-auto-frameskip
Disable auto frameskipping
--no-ips
Do not apply IPS patch
--no-mmx
Disable MMX support
--no-pause-when-inactive Don't pause when inactive
--no-rtc
Disable RTC support
--no-show-speed
Don't show emulation speed
--no-throttle
Disable thrrotle
--pause-when-inactive
Pause when inactive
--rtc Enable RTC support
--show-speed-normal
Show emulation speed
--show-speed-detailed
Show detailed speed data
-1, --video-1x
1x
-2, --video-2x
2x
-3, --video-3x
3x
-4, --video-4x
4x
-F, --fullscreen
Full screen
-G, --gdb=PROTOCOL
GNU Remote Stub mode: tcp - use TCP at port 55555 tcp:PORT - use TCP at port PORT pipe - use pipe transport
-N, --no-debug
Don't parse debug information
-S, --flash-size=SIZE
Set the Flash size
--flash-64k
0 - 64K Flash
--flash-128k
1 - 128K Flash
-T, --throttle=THROTTLE
Set the desired throttle (5...1000)
-Y, --yuv=TYPE
Use YUV overlay for drawing: 0 - YV12 1 - UYVY 2 - YVYU 3 - YUY2 4 - IYUV
-b, --bios=BIOS
Use given bios file
-c, --config=FILE
Read the given configuration file
-d, --debug
Enter debugger
-f, --filter=FILTER
Select filter:
--filter-normal
0 - normal mode
--filter-tv-mode
1 - TV Mode
--filter-2xsai
2 - 2xSaI
--filter-super-2xsai
3 - Super 2xSaI
--filter-super-eagle
4 - Super Eagle
--filter-pixelate
5 - Pixelate
--filter-motion-blur
6 - Motion Blur
--filter-advmame
7 - AdvanceMAME Scale2x
--filter-simple2x
8 - Simple2x
--filter-bilinear
9 - Bilinear
--filter-bilinear+
10 - Bilinear Plus
--filter-scanlines
11 - Scanlines
--filter-hq2x
12 - hq2x
--filter-lq2x
13 - lq2x
-h, --help
Print this help
-i, --ips=PATCH
Apply given IPS patch
-p, --profile=[HERTZ]
Enable profiling
-s, --frameskip=FRAMESKIP
Set frame skip (0...9)
-t, --save-type=TYPE
Set the available save type
--save-auto
0 - Automatic (EEPROM, SRAM, FLASH)
--save-eeprom
1 - EEPROM
--save-sram
2 - SRAM
--save-flash
3 - FLASH
--save-sensor
4 - EEPROM+Sensor
--save-none
5 - NONE
-v, --verbose=VERBOSE
Set verbose logging (trace.log) 1 - SWI 2 - Unaligned memory access 4 - Illegal memory write 8 - Illegal memory read
16 - DMA 0 32 - DMA 1 64 - DMA 2
128 - DMA 3 256 - Undefined instruction 512 - AGBPrint messages
Long options only:
--agb-print
Enable AGBPrint support
--auto-frameskip
Enable auto frameskipping
--ifb-none
No interframe blending
--ifb-motion-blur
Interframe motion blur
--ifb-smart
Smart interframe blending
--no-agb-print
Disable AGBPrint support
--no-auto-frameskip
Disable auto frameskipping
--no-ips
Do not apply IPS patch
--no-mmx
Disable MMX support
--no-pause-when-inactive Don't pause when inactive
--no-rtc
Disable RTC support
--no-show-speed
Don't show emulation speed
--no-throttle
Disable thrrotle
--pause-when-inactive
Pause when inactive
--rtc Enable RTC support
--show-speed-normal
Show emulation speed
--show-speed-detailed
Show detailed speed data
VisualBoyAdvance [option ...] file May 2012 VISUALBOYADVANCE(1)