GNUGK-How to setup static gateway to gateway routing


 
Thread Tools Search this Thread
Operating Systems Linux GNUGK-How to setup static gateway to gateway routing
# 1  
Old 08-12-2010
GNUGK-How to setup static gateway to gateway routing

Dear Sir

I am a newbie in the world of IP telephony. I have been working with Asterisk PBX (SIP) and Cisco Call Manager (MGCP) but now I am learning on how to work GNUGK for H.323 Gatekeeper.

I am having a problem, configuring static call routing on GNUGK

in the section

[RasSrv::GWPrefixes]

Remote1=203.
Remote2=486.
Local-router1 = 0...,1...,01.........,1.......,0......,1......,2...,3...,4...,5...,6...,7...,8...


Local-router2 = 0...,1...,01.........,1.......,0......,1......,2...,3...,4...,5...,6...,7...,8....



You can see that the routers Local-router1 and 2 has the same dialling plan.

What happens is the gatekeeper send calls randomly to one router or to the other when one of the matching extension is dialled.

What I am trying to do is to force

any calls coming from Remote1 to go out only throught Local-router1

Remote1 =========================> Local-router1

and any calls from Remote2 to go out throught Local-router2

Remote2 =========================> Local-router2

please tell me if there is any way of doing that, I have tried many things here and I am out of ressources.

Thank you in advance for your help
Roland
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. UNIX for Beginners Questions & Answers

Inconsistency between RedHat 6.5 global gateway and single gateway leads to loss of default gateway

Dear friends I use RedHat 6.5, which sets the gateway in the configuration file / etc / sysconfig / network as GATEWAY = 192.168.1.26, and the gateway in the configuration file / etc / sysconfig / network-scripts / ifcfg-eth11 as GATEWAY = 192.168.1.256. The two gateways are different.... (6 Replies)
Discussion started by: tanpeng
6 Replies

2. Linux

Not able to setup CentOS 7 as gateway [Using squid proxy]

Hello, Did anyone setup a CentOS7 as a gateway (with squid transparent proxy). I am trying to do so but not able to setup. I setup squid , iptables (using it instead of firewalld) and all the necessary IPtables rules but nothing work. It work previously but access.log of squid not getting... (4 Replies)
Discussion started by: sunnysthakur
4 Replies

3. UNIX for Advanced & Expert Users

Issue setup Transparent proxy and Gateway using Squid on CentOS 7

Hello, We are migrating our gateways from CentOS 6 to CentOS 7 and for setting up a transparent proxy using squid and Firewalld i am using below configuration. #Firewalld configurations firewall-cmd --permanent --zone=public --add-forward-port=port=80:proto=tcp:toport=3128:toaddr=LAN_IP... (4 Replies)
Discussion started by: sunnysthakur
4 Replies

4. IP Networking

Routing problem : two interfaces one gateway

hi folks, i have a horstbox-router with the following configuration. it has 4 ethernet ports from wich one (wan0) is configured as an external modem via dhcp. at this port/interface(wan0) it is connected with my home network (other switch). this configuration results in the following... (14 Replies)
Discussion started by: gencaslan
14 Replies

5. AIX

IBM Server doesn't ping gateway unless you put a static route

Just want to know if someone has a clue about what could be happening here: I have an AIX box with four NICs in Ether channel connected to a Cisco Switch. When I try to ping the default gateway, sometimes it works, but sometimes it doesn't work unless it has a defined static route. Thanks... (1 Reply)
Discussion started by: witt
1 Replies

6. Solaris

Can't setup gateway other than 127.0.0.1?

I have just installed Solaris 10 X86 today, but I can't use internet at all on it. When I was installing it, it only asked me to create a hostname, without even asking me this computer is "networked" or "non-networked". After I finished installation, I use "netstat -rn" command, and only see... (3 Replies)
Discussion started by: Diamondust
3 Replies

7. IP Networking

Static IP / Subnet mask and Gateway

Hi all, I installed Fedora 9 + squid at one of PC at work. Our company has windows 2003 servera acting as DHCP server. During installation, i set linux box up as Static IP (192.168.0.100) But once installation completed, The pc is assigned a different IP address instead of 192.168.0.100.... (3 Replies)
Discussion started by: c00kie88
3 Replies

8. AIX

gateway

Dear folks, How can delete the gateway from smitty or by command, Because I have 2 gatway in the system and I tried to delete by smitty it gave me failed command (7 Replies)
Discussion started by: magasem
7 Replies

9. Red Hat

gateway

Hi, in which file and how shuold be decalred a gateway and its IP adresse ? Where and how add a gateway ? Many thanks before. (3 Replies)
Discussion started by: big123456
3 Replies

10. IP Networking

gateway

I used "route" to add the default gateway I wrote this: route add default 19x.x.x.x 0 but this is not permanent default gateway. Do I need to use another command? Thank a lot (2 Replies)
Discussion started by: lmena
2 Replies
Login or Register to Ask a Question
TRACEROUTE6(8)						    BSD System Manager's Manual 					    TRACEROUTE6(8)

NAME
traceroute6 -- print the route IPv6 packets will take to the destination SYNOPSIS
traceroute6 [-dlnrv] [-f firsthop] [-g gateway] [-m hoplimit] [-p port] [-q probes] [-s src] [-w waittime] target [datalen] DESCRIPTION
-d Debug mode. -f firsthop Specify how many hops to skip in trace. -g gateway Specify intermediate gateway (traceroute6 uses routing header). -m hoplimit Specify maximum hoplimit. -l Print both host hostnames and numeric addresses. Normally traceroute6 prints only hostnames if -n is not specified, and only numeric addresses if -n is specified. -n Do not resolve numeric address to hostname. -p port Set UDP port number to port. -q probes Set the number of probe per hop count to probes. -r -s src Src specifies the source IPv6 address to be used. -v Be verbose. -w waittime Specify the delay time between probes. RETURN VALUES
The traceroute6 command will exit with 0 on success, and non-zero on errors. SEE ALSO
ping(8), ping6(8), traceroute(8) HISTORY
The traceroute6 command first appeared in WIDE hydrangea IPv6 protocol stack kit. BSD
May 17, 1998 BSD