Network interfaces problem


 
Thread Tools Search this Thread
Special Forums IP Networking Network interfaces problem
# 1  
Old 09-19-2007
Network interfaces problem

Hi,

I have problems with my SCO unix network interfaces.
Intel integrated adapter was failing, so I installed new one - 3COM adapter into free PCI slot.
Installed driver using SCO Software manager - successfully
Added new Network adapter using SCO Network configuration manager - successfully
after that I checked using ifconfig -a
there was some loopback interfaces and - net0 -intel interface, and net1 -3com interface.
So I thought that everything is OK and removed intel adapter using Network configuration manager, after that things went wrong:
ifconfig -a displays only loopback interfaces.
3com driver is installed, 3com network adapter is added(Network configuration manager), but ifconfig -a don't display it!!!

So I thought that it's hardware problem - booted knoppix from cd - my 3com adapter is autodetected, up and running!

After that I tried all 'dumb' ways - rebooted, reinstalled(driver), changed apapter pci slot...- result is the same -driver - OK, adapter(Network configuration manager) - OK, "ifconfig -a" - no entries. By the way devices net0 and net1 are present(I asume net1 is my 3com adapter).

I'm newbe in unix so maybe I missing some 'obvious' step ?
How to force my 3com adapter(net1 ?) to apear in ifconfig list, and force it function corectlly ?

thank you
Vilius
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. IP Networking

Network Interfaces Problem - Monitoring equipment

Dear gurus of Linux / Unix. I have a server, which I use to monitoring traffic, the problem that I find is when I run the following command: probe:~ # sar -n DEV 1 I see that I one second appear info in some interface and in the other second no appear, I don't know what will be the... (0 Replies)
Discussion started by: andresguillen
0 Replies

2. AIX

Problem with multiple network interfaces

Hi .. we have two AIX 5.3 systems with a small client server app communicating over a TCP socket. Box A has a single network interface where the server app (in Java) opens a well known port and waits for connections from Box B. Box B has two network interfaces, X and Y. Interface X has the... (4 Replies)
Discussion started by: RonBowater
4 Replies

3. UNIX for Dummies Questions & Answers

/etc/network/interfaces

i need a one liner command that writes in /var/log/net.log the date when i connect to the network and when i disconect ..i know that i need to write somethin in /etc/network/interfaces but idk what ! please help (1 Reply)
Discussion started by: g0dlik3
1 Replies

4. UNIX for Advanced & Expert Users

How to bond network interfaces

All, I have a quad NIC on a V880 running Solaris 9. I've heard you can bond interfaces together and get better throughput. I found this link that seems to describe the process well. However, the command mentioned (dladm) is missing. Is there some package I need to install to get this command? Thx.... (2 Replies)
Discussion started by: agcodba
2 Replies

5. Debian

/etc/network/interfaces problem

Hello i am configuring a debian lenny sever ,/etc/network/interfaces is modified so that eth1 takes a static IP address then i save it wq! then i restart the networking , /etc/init.d/networking restart . but after reboot ,the file is reset ,note that the interfaces had by defauklt IPv6 address... (5 Replies)
Discussion started by: learn82
5 Replies

6. Solaris

Network Interfaces

I got second IOU in my M5000 but not able bring internal network interfcae .. ike i don't get link on those 2 interfaces .. and the same network cable plugged in PCI network card it works like a charm Is there any special way to enable the internal IOU interfaces or i have bad nics ? (8 Replies)
Discussion started by: fugitive
8 Replies

7. AIX

NIM w/ two network interfaces

Hi all, this is my first post on this forum. My main problem is this: I have a NIM server that I am trying to configure two interfaces on. One interface is for an internal Admin VLAN, the other is so that the server can use SUMA to pull updates. The problem is that I need help w/ the routing.... (1 Reply)
Discussion started by: snakernetb
1 Replies

8. AIX

NIM w/ two network interfaces

Hi all, this is my first post on this forum. My main problem is this: I have a NIM server that I am trying to configure two interfaces on. One interface is for an internal Admin VLAN, the other is so that the server can use SUMA to pull updates. The problem is that I need help w/ the routing.... (0 Replies)
Discussion started by: snakernetb
0 Replies

9. SCO

Network interfaces problem

Hi, I have problems with my SCO unix network interfaces. Intel integrated adapter was failing, so I installed new one - 3COM adapter into free PCI slot. Installed driver using SCO Software manager - successfully Added new Network adapter using SCO Network configuration manager - successfully... (0 Replies)
Discussion started by: vilius
0 Replies

10. Solaris

HOW-TO Retrieve all network interfaces??!

Yes. But just wait a bit. How to do it via system calls? I'm just a newbie in Unix\Linux\Solaris e.t.c. programming. Can anyone help me? I need an advice probably how to do it or may be what API to read... :) Please, help... (2 Replies)
Discussion started by: LocalStorm
2 Replies
Login or Register to Ask a Question
IXGBE(4)						   BSD Kernel Interfaces Manual 						  IXGBE(4)

NAME
ixgbe -- Intel(R) 10Gb Ethernet driver for the FreeBSD operating system SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file: device ixgbe Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): if_ixgbe_load="YES" DESCRIPTION
The ixgbe driver provides support for PCI 10Gb Ethernet adapters based on the Intel 82598EB Intel(R) Network Connections. The driver sup- ports Jumbo Frames, MSIX, TSO, and RSS. For questions related to hardware requirements, refer to the documentation supplied with your Intel 10GbE adapter. All hardware requirements listed apply to use with FreeBSD. Support for Jumbo Frames is provided via the interface MTU setting. Selecting an MTU larger than 1500 bytes with the ifconfig(8) utility configures the adapter to receive and transmit Jumbo Frames. The maximum MTU size for Jumbo Frames is 16114. This driver version supports VLANs. For information on enabling VLANs, see ifconfig(8). HARDWARE
The ixgbe driver supports the following cards: o Intel(R) 10 Gigabit XF SR/AF Dual Port Server Adapter o Intel(R) 10 Gigabit XF SR/LR Server Adapter o Intel(R) 82598EB 10 Gigabit AF Network Connection o Intel(R) 82598EB 10 Gigabit AT CX4 Network Connection DIAGNOSTICS
ixgbe%d: Unable to allocate bus resource: memory A fatal initialization error has occurred. ixgbe%d: Unable to allocate bus resource: interrupt A fatal initialization error has occurred. ixgbe%d: watchdog timeout -- resetting The device has stopped responding to the network, or there is a problem with the network connection (cable). SUPPORT
For general information and support, go to the Intel support website at: http://support.intel.com. If an issue is identified with the released source code on the supported kernel with a supported adapter, email the specific information related to the issue to <freebsd@intel.com>. SEE ALSO
altq(4), arp(4), netintro(4), ng_ether(4), polling(4), vlan(4), ifconfig(8) HISTORY
The ixgbe device driver first appeared in FreeBSD 7.0. AUTHORS
The ixgbe driver was written by Intel Corporation <freebsd@intel.com>. BSD
December 19, 2010 BSD