Traffic shaping with iptables

10 More Discussions You Might Find Interesting

1. Debian

Linux outbound traffic filtering with: cgroups + tc + iptables

I spent a lot of time trying to implement outbound traffic filtering with: cgroups + tc + iptables on Debian Jessie. Unfortunately there is still something wrong. The biggest issue is: - cgroups install + config - net_cls subsystem implementation - packets marking with net_cls - appropriate...

2. IP Networking

Upload problem with traffic shaping though a Linux router.

So I want to limit the download and upload speed of a specific ip adress in a local network. To do this I are using a bach script running in a linux OS (Ubuntu 11.04). The issue here is that the upload shaper does not work. I have tried an alternate solution aswell though that does not work as...

3. IP Networking

Dividing traffic with u32 iptables filter

I would like to divide traffic between two squid servers. I have been thinking about using iptables u32 filter, to check last bit of ip address which is comming to gateway. Then I would like to direct even IP adresses to one squid host, and odd to the other. Is it reasonable ? Thank you for...

4. IP Networking

Bandwidth shaping on specific port

Hi, I've been looking for a few hours now, reading various docs and man pages, but the info I found so far is either not what I was looking for or I just don't get how to do the thing I need.... So, my "problems" is that I have a server running on a specific port and I need to shape traffic...

5. Shell Programming and Scripting

Block incoming traffic FTP from internet using iptables

Hi everybody. I have the next scenary: eth0: WAN eth1: DMZ eth2: LAN I need to block all incoming trafic from the internet through my network LAN using iptables. I have squid but i need to do this using ipatbles. I have been listening about iptables -A FORDAWARD but I am stuck right...

6. IP Networking

Mac OS X IP traffic shaping question

Not sure if this considered traffic shaping or not, so I'll appreciate the enlightenment... Setup- Mac Pro, Mac OS X 10.5.6, Crashplan Pro Backup server. the Mac Pro has 2 E-net ports, en0, en1. Both E-net ports are connected to the same network, different IP's. Problem- We are planning to...

7. IP Networking

egress and ingress traffic shaping.

What exactly is the difference between ingress and egress in traffic shaping, what does it mean when we say that imq provies ingress shaping using egress qdisks?

8. IP Networking

Iptables/TC: how to make masqueraded traffic go through an openVPN tun0?

Hi all! We have a setup of three computers; Machine A (eth0) -> Machine B (eth0, hso0, tun0) -> Machine C (eth0, tun0) hso0 is the packet interface of a 3G modem, it behaves like a normal network interface. Machine B and C are connected in a VPN using openVPN (TCP). Machine A is a...

9. IP Networking

measuring traffic with iptables

i have a wireless network that is connected to internet over nat.there is ap that is connected to another ap in bridge mode, on ap is used for clients, and the other is connected to the machine that is doing masquerading. so i want to measure traffic of my clients and i thought about doing it with...

10. UNIX for Advanced & Expert Users

Traffic Shaping

I'm using FreeBSD because I like how easy the system can be set up, how software can be installed/removed and ... many other reasons:-) But there is a thing I don't know how to deal with: I have few connections behind a machine and I want to give to the machines behind a minimum guaranteed...

LEARN ABOUT OPENSOLARIS

ip6tables-save

IPTABLES-SAVE(8)                                                  iptables 1.6.1                                                  IPTABLES-SAVE(8)

NAME

       iptables-save -- dump iptables rules to stdout

       ip6tables-save -- dump iptables rules to stdout

SYNOPSIS

       iptables-save [-M modprobe] [-c] [-t table]

       ip6tables-save [-M modprobe] [-c] [-t table]

DESCRIPTION

       iptables-save  and ip6tables-save are used to dump the contents of IP or IPv6 Table in easily parseable format to STDOUT. Use I/O-redirect-
       ion provided by your shell to write to a file.

       -M, --modprobe modprobe_program
              Specify the path to the modprobe program. By default, iptables-save will inspect /proc/sys/kernel/modprobe  to  determine  the  exe-
              cutable's path.

       -c, --counters
              include the current values of all packet and byte counters in the output

       -t, --table tablename
              restrict output to only one table. If not specified, output includes all available tables.

BUGS

       None known as of iptables-1.2.1 release

AUTHORS

       Harald Welte <laforge@gnumonks.org>
       Rusty Russell <rusty@rustcorp.com.au>
       Andras Kis-Szabo <kisza@sch.bme.hu> contributed ip6tables-save.

SEE ALSO

       iptables-apply(8),iptables-restore(8), iptables(8)

       The  iptables-HOWTO, which details more iptables usage, the NAT-HOWTO, which details NAT, and the netfilter-hacking-HOWTO which details the
       internals.

iptables 1.6.1                                                                                                                    IPTABLES-SAVE(8)

IP Networking