ISCSI initiator (client) for HP-UX 10.20

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Delete from target a LUN that is mounted on initiator

hi all, i'm new here and i have a question, i wanted to know, what should happen if i delete a LUN that is already mounted on one of my initiators. thanks!

2. Solaris

Does iscsi initiator supported on SUN

I have a Sun Blade 2500 with SUN 5.9 OS installed. I have configured ISCSI SAN and one of my Red Hat OS can accessed/mount the ISCSI SAN disk Now i want to access/mount another ISCSI SAN disk on SUN solaris. Is that possible ? Thanks

3. AIX

iSCSI troubleshooting

I have an Equallogic SAN that I connect to from AIX (as well as Windows) I had configured the connection and created the volumes and filesystems and all was working great. Then one day, no communication between the SAN and the AIX (I can ping though) Anything I do on the AIX box at this time...

4. UNIX for Dummies Questions & Answers

How to change ethernet cable of iscsi initiator (iscsi client)?

how to change ethernet cable of iscsi initiator (iscsi client)

5. Solaris

Iscsi - target + initiator on the same host.

Hi all iscsiadm / iscsitadm. Ive created two devices on a host. # iscsitadm list target Target: 1-disk0 iSCSI Name: iqn.1986-03.com.sun:02:f105ddf3-52a4-ed7a-9590-c3d354b8fc32.1-disk0 Connections: 1 Target: 1-disk1 iSCSI Name:...

6. Filesystems, Disks and Memory

iSCSI client setup difficulties

I am trying to set up iscsi linux clients and am having some problems. iscsid is running, I can do discovery fine, but adding the iscsi lun I get the following error: iscsiadm -m node -T iqn.xxxxxxxxxxxxxx -p y.y.y.y:3260 -l Logging in to iscsid: session already running. iscsiadm: Could not...

7. OS X (Apple)

iSCSI

I have configured iSCSI on server with linux running on it . On APPLE I have downloaded gloablSAN. When globalSAN is started ,it asks for target IP . I have given target IP . It has detected the disks . But when i use "disk utilities " , here the ISCSI disk are not displayed. except the...

8. AIX

How to configure a FC HBA in "initiator mode"?

Hi all, I have a p520 machine running 5.2ML9 with a 2Gb FC HBA from IBM, i.e. # lscfg -vl fcs0 fcs0 U787A.001.DNZ06YM-P1-C3-T1 FC Adapter Part Number.................80P4543 EC Level....................A Serial Number...............1F4270A0B6 ...

9. UNIX for Dummies Questions & Answers

Process and its initiator's IP

Hi, Is there a command that will tell me which client machine started a process on my Solaris server? what I'm trying to do is that : I've noticed someone is running a program (in my case, the Oracle sqlplus program) by using a "ps -ef | grep sqlplus". Then I use "who" and "finger" and...

LEARN ABOUT REDHAT

iscsi.conf

ISCSI.CONF(5)							File Formats Manual						     ISCSI.CONF(5)

NAME

       iscsi.conf - iSCSI Target and LUN configuration

SYNOPSIS

       /etc/iscsi.conf

DESCRIPTION

       This manual page describes the format of the /etc/iscsi.conf file. This file is a simple text file that iscsid(8) uses to locate iSCSI tar-
       get devices and LUNs.  Comments are marked by lines beginning with '#'.

       Available entries include:

       DiscoveryAddress=<address>
	      IP address or hostname to use for target discovery.  A TCP port number may be specified by appending a colon followed  by  the  port
	      number. This entry must start in the first column, and must not contain any whitespace.

       TargetIpAddr=<address>
	      A synonym for DiscoveryAddress.

       Username=<user>
	      Specify  the  authentication user.  If this entry precedes all DiscoveryAddress entries, it serves as the default.  If this entry is
	      indented under a DiscoveryAddress entry, it specifies the user for all targets discovered at that IP address.

       Password=<pass>
	      Specify the authentication password for the previously listed iSCSI If this entry precedes all DiscoveryAddress entries,	it  serves
	      as  the default.	If this entry is indented under a DiscoveryAddress entry, it specifies the user for all targets discovered at that
	      IP address.

EXAMPLE

       # set the default user and password
       Username=alice
       Password=nty57nbe

       # targets at this address will use the default Username and Password
       DiscoveryAddress=192.168.10.94

       # targets at this address will use the Username and Password below
       DiscoveryAddress=192.168.10.95
	   Username=beatrice
	   Password=93fdgc20

NOTES

       The iSCSI initiator drivers, README files, and example configuration files are available on the Linux-iSCSI homepage at:

       http://linux-iscsi.sourceforge.com <http://linux-iscsi.sourceforge.com>

FILES

       /etc/iscsi.conf
	      iSCSI Target and LUN configuration

SEE ALSO

       iscsid(8)

$Revision: 1.9 $					   $Date: 2002/09/19 20:00:32 $ 					     ISCSI.CONF(5)

HP-UX