After adding new iscsi target port, still the session state of that target port is showing offline


 
Thread Tools Search this Thread
Operating Systems HP-UX After adding new iscsi target port, still the session state of that target port is showing offline
# 1  
Old 11-05-2013
After adding new iscsi target port, still the session state of that target port is showing offline

Hi,

I wanted to configure new iscsi port on HPUX system, i added the target port address and configured it, once done, went to array side and searched for that host iqn number , but was nt able to find the same, came to host, then when i ran "iscsiutil -pVS" command it gave me below result

Code:
Session information
-------------------

Session # 1
------------
        Session Instance No.      : 1
        ISID                      : 0x800000000001
        Session State             : Offline
        Target Name               : iqn.2000-05.com.3pardata:20220002ac004445
        Target Alias              :
        No. of Target Addresses   : 1

  Address # 1
  ------------
        IP Address                : 15.213.64.197
        iSCSI TCP Port            : 3260
        iSCSI Portal Group Tag    : 22

  User Configured:
  ----------------

        Authenticaton Method      :
        CHAP Method               : CHAP_UNI
        Initiator CHAP Name       :
        CHAP Secret               :
        Header Digest             : None,CRC32C (default)
        Data Digest               : None,CRC32C (default)

  Login Keys:
  -----------

        MaxConnections            : 1
        AuthMethod Proposed       : None
        AuthMethod Chosen         : None
        MaxRecvDataSegmentLength  : 16384 bytes
        MaxBurstLength            : 262144 bytes
        FirstBurstLength          : 65536 bytes
        DefaultTime2Wait          : 2 seconds
        DefaultTime2Retain        : 20 seconds
        MaxOutstandingR2T         : 1
        ErrorRecoveryLevel        : 0 (Session failure recovery)
        InitialR2T                : Yes
        ImmediateData             : No
        DataPDUInOrder            : Yes
        DataSequenceInOrder       : Yes
        OFMarker                  : No
        IFMarker                  : No
        OFMarkInt                 : 0
        IFMarkInt                 : 0
        DataDigest Proposed       : None,CRC32C
        DataDigest Chosen         : None
        HeaderDigest Proposed     : None,CRC32C
        HeaderDigest Chosen       : None
        TargetAddress             : 15.213.64.197:3260,22

Here in the output, the "session State" is showing as "offline", is that the reason for host not getting listed on Array side.

And how to make it online...?


Any help is appreciated here.

Thanks,
Vinay

Moderator's Comments:
Mod Comment Please use [code] [/code] tags instead of decking out your post with fonts and colors.

Last edited by Corona688; 11-05-2013 at 02:20 PM..
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies

2. Linux

How to boot iSCSI target from console linux?

I need boot any images from iSCSI and I'd like to boot from linux console of a previous LiveCD booted. Is possible, without gpxe, ipxe firmware or similar? With a simple iSCSI initiator for example? (1 Reply)
Discussion started by: spark2k06
1 Replies

3. HP-UX

Unable to delete iscsi target

Hi Please can someone give me a hint on this, when I list the targets, I see two o them: #iscsiutil -p Operational Target Information ------------------------------ Target # 1 ----------- Target Name : iqn.1992-08.com.netapp:sn.142241859 Target Alias ... (2 Replies)
Discussion started by: fretagi
2 Replies

4. IP Networking

port state issue

Hello, I have following issue: traceroute connection works to given address(ip + port) but telnet(and other network tools) do not. How it is possible? telnet 10.150.184.225 443 Connection refused tracert -T -p 443 10.150.184.225 traceroute to 10.150.184.225 (10.150.184.225), 30 hops... (3 Replies)
Discussion started by: kuba7
3 Replies

5. UNIX for Advanced & Expert Users

Can You Mount FAT32 iSCSI Target in Solaris 10 (sparc)?

I get "mount: I/O error" when trying to mount an existing FAT32 iSCSI target. I also tried formatting the iSCSI target with fdisk and got fdisk: "Error in ioctl DKIOCSMBOOT" Details -- According to the format command, the whole disk is allocated to slice 6 and /dev/rdsk shows this as:... (1 Reply)
Discussion started by: ctafret
1 Replies

6. Solaris

Can You Mount FAT32 iSCSI Target in Solaris 10 (sparc)?

I get "mount: I/O error" when trying to mount an existing FAT32 iSCSI target. I also tried formatting the iSCSI target with fdisk and got fdisk: "Error in ioctl DKIOCSMBOOT" Details -- According to the format command, the whole disk is allocated to slice 6 and /dev/rdsk shows this as:... (0 Replies)
Discussion started by: ctafret
0 Replies

7. UNIX for Advanced & Expert Users

LTO2 tape drive as iSCSI target

I'm using Bacula as my backup system, with full backups going to an LTO2 tape drive, while differentials and incrementals go to a disk array on my main server, babylon4. The tape drive is currently attached to a separate machine, because babylon4 does not have a SCSI controller, nor a free PCI-X... (0 Replies)
Discussion started by: Phil Stracchino
0 Replies

8. Solaris

How do I breakdown the Target (tx) part of a cXtXdX Iscsi device?

Hello, I am trying to breakdown the cXtXdX (specifically tX) part of an iscsi device. I know in the fibre SAN world, this tX will usually be a combination of the path to device/device WWN. From what I understand in iscsi world it is similar, breaking down into... (0 Replies)
Discussion started by: Bashful
0 Replies

9. Solaris

Iscsi - target + initiator on the same host.

Hi all iscsiadm / iscsitadm. Ive created two devices on a host. # iscsitadm list target Target: 1-disk0 iSCSI Name: iqn.1986-03.com.sun:02:f105ddf3-52a4-ed7a-9590-c3d354b8fc32.1-disk0 Connections: 1 Target: 1-disk1 iSCSI Name:... (0 Replies)
Discussion started by: sbk1972
0 Replies

10. UNIX for Dummies Questions & Answers

Hitting with custom port in CLOSE_WAIT state for long time in solaris 10

Hi, Occasionally I am getting the port state in CLOSE_WAIT for long time in the solaris server. I am not sure is it application problem or not. Because we are using port 9009 for Tomcat process in our web application, some time when I start the application, the port 9009 is in CLOSE_WAIT... (0 Replies)
Discussion started by: mgmk.84
0 Replies
Login or Register to Ask a Question