Old RS/6000 lost its mind

 
Thread Tools Search this Thread
Special Forums Hardware Old RS/6000 lost its mind
# 8  
Old 02-16-2014
I have taken every card out, cleaned them as best I can using compressed air. Tempted to try some defluxing spray. I'm not totally sure which cards are critical to system operation. There is the POWER2 CPU and RAM board (I'm assuming I need that) a power supply board, and there is an additional RAM board that is fully loaded. I have tried with and without that additional RAM board.

Maybe the AIX guys will know more about these. I was tempted to post there but wanted follow the rules. I was pretty sure it was hardware from the start.
# 9  
Old 02-17-2014
Quote:
Originally Posted by drjohnnyfever
I'm not totally sure which cards are critical to system operation.
Sorry for not answering earlier, i simply missed this thread.

First: this type of hardware rarely goes broken. At the time this baby was built, IBM used only stainless steel and reinforced concrete. Nothing short of an atomic strike will be able to break these babies once you got them going. ;-))

Second: You need an "ioplanar" a "sysplanar" and maybe a SCSI connection to attach the disk(s). I am not sure if the 39H had a SCSI adapter integrated on the ioplanar or not. This should be enough to connect via a serial terminal (set it to "9600,8,N,1", unlike newer system which use 19200 baud, use either a "wyse60" emulation or a "IBM3151[-III]").

The flashing "888" is a very bad sign. To help you search further, it is called "three-digit-code" in IBM-lingo. Subcode 103 is, if memory serves correctly, something about a dump, AFAIR, and "125-911" will be subcodes for this 103-condition (if it is really about dumping probably the reason for the dump).

//edit: 103 is hardware, according to this. This documentation is about another MicroChannel system but should be the identical to yours in this regard.

I will see if i can retrieve further information from the heap in my basement (:-)) ). In the meantime this link might help you, maybe this link too.

Quote:
Originally Posted by drjohnnyfever
Maybe the AIX guys will know more about these. I was tempted to post there but wanted follow the rules. I was pretty sure it was hardware from the start.
Moderator's Comments:
Mod Comment This is a laudable effort and more consideration on your part than usually displayed. Welcome to the forum and i hope to see you more often. Do not think too much about placing your thread, though. The line is not drawn too sharply and we understand that sometimes it is difficult to determine where a thread belongs. As long as it is arguably in one of the seemingly correct boards it is ok and further we (the moderators) are used to move around threads until they finally fit in.


I hope this helps.

bakunin

Last edited by bakunin; 02-17-2014 at 06:31 AM..
This User Gave Thanks to bakunin For This Post:
# 10  
Old 02-23-2014
Well, after digging through the IBM documentation for an hour or two and trying a diagnostic procedure of taking ALL the ram off the CPU board that i wouldn't have guessed of trying, it seems the CPU board itself is the source of my issue. I am fairly confident that thats what it is at least.

The good news is that if I can't fix it and there isn't a lot on the board I think i can fix short of the clock crystals I can source a new one for $120.

A guy on ebay wants $1300 for one of these 39H systems. I doubt it would sell for anywhere near that price... but I paid $30 for it and I feel okay putting $120 into it.
# 11  
Old 02-23-2014
I read on some accounts that a failing battery might cause similar (if not the same) effects, so i suggest you start by replacing the battery first. This is probably the least expensive part of it.

If you do not absolutely need a 39H for some reason but would be satisfied with any RS/6000 you might consider buying one of the many 43Ps still flying around. It won't run any OS newer than 5.1 (Model 130/230) or 5.3 (Mod. 140/240) but the 39H will not run anything newer than 4.3.3 either (if it even does this, there might be microcode issues preventing even 4.3.3).

You should get even a well-equipped 43P for under $500,-.

I hope this helps.

bakunin
# 12  
Old 02-26-2014
I did replace the battery, I wired up a AA holder to the pin header plug. I think it was a 4.5 volt battery if memory serves, so 3 AA cells. Was one of the first things I tried but sadly didn't make a difference. The old battery was very dead. Floated at around 2 volts and would slowly drop on the meter.

I definitely don't need the 39H and probably will end up picking up a newer system. I'd still like to fix it though. I'm a bit of a collector and its not generic PC hardware after all. I think its worth keeping running.

Thanks for the tip. I have my eye on eBay.
Login or Register to Ask a Question

Previous Thread | Next Thread

7 More Discussions You Might Find Interesting

1. What is on Your Mind?

PI calculated by hand. If this doesn't blow your mind nothing will.

This came to my attention very recently... I have put it here as a fun item not related to UNIX in any way... Chudnovsky algorithm - Wikipedia WOW! And a great, light hearted 16 minute video about it: Calculating π by hand: the Chudnovsky algorithm - YouTube Enjoy... (3 Replies)
Discussion started by: wisecracker
3 Replies

2. What is on Your Mind?

Something in my mind - what's your opinion ?

Dear Forum staff / Advisors / members , I am having something in my mind, about Linux / Unix possible Interview questions collections, I guess if I post them here,which might be useful for our members and for students, and in meantime we can discuss also about those questions, what's your... (4 Replies)
Discussion started by: Akshay Hegde
4 Replies

3. What is on Your Mind?

another whats on my mind!!! - winter waves

for anyone who surfs the northeast: why can't we have more frequent wave forming winds (bigger low pressure systems) in the summer?! i'm tired of putting on 100lbs of wet suit and surfing awesome waves. i'd rather put on no wet suit and surf awesome waves. :) damn the bermuda high!! anyone... (1 Reply)
Discussion started by: pupp
1 Replies

4. UNIX for Dummies Questions & Answers

Unix command in mind map

I found this link that might be useful for a newbie to remember unix commands. It use mind map technique and summarize everything within one page. http://mind-map-you.blogspot.com/2006/12/unix-command-in-mind-map.html (0 Replies)
Discussion started by: bani100
0 Replies

5. What is on Your Mind?

I Am Calling All Unix Experts Young Mind In Need

My name is Courtney Robinson, and I am just a young man trying to figure out were he wants his life to head. I am currently in school for Computer Science and have once class left and jsut figured out I hate programming. However I am in love with Storage (SAN), UNIX, LINUX. I want to learn more.... (10 Replies)
Discussion started by: Courtney3216
10 Replies

6. UNIX for Advanced & Expert Users

mind shattering good questions

i want to make a C program that should wb able to do the following tasks. one thing that i want to say is that we dont have to use ps and top all these commands by C programmign only .......... i am doing this by proc file system using CAT command in various files but .......its not... (0 Replies)
Discussion started by: shukla_chanchal
0 Replies

7. Filesystems, Disks and Memory

Lost Data Lost Admin

First time so excuse my ignorance please. I may not be accurately describing the issue. I have inherited a small lab mostly SUN V120s. We lost power and are trying to recover. Nope no backups... The primary issue I have is 1 box is an Oracle Server. It has 2 36Gb harddrives. I am able to... (3 Replies)
Discussion started by: murphsr
3 Replies
Login or Register to Ask a Question