I have several applications locked to Solaris 8 (and older) and have been very happy with my Sparcs and Ultras but am getting tinnitus problems from fans and disks.
Any tips on a quiet thin client (with decent graphics, not video or gaming level but 24bit and multi monitor would be useful) that is easily found and supportable in the secondary market? Figuring on dtlogin to our larger Ultra 2 & 3 based servers. Some limited CDE/Sparc86 stuff too.
My sysop isn't really ready for virtualization (yet). Besides, I get uppity when I have to use other-than-Sun keyboards <g>.
Hi.
I have a Microsystems SunBlade 150
shell# cat /etc/release
Solaris 8 2/02 s28s_u7wos_08a SPARC
shell# uname -a
SunOS HOSTNAME 5.8 Generic_108528-14 sun4u sparc SUNW,Sun-Blade-100
shell# prtconf -F
/pci@1f,0/SUNW,m64B@13:m640
When I join to the only account the server try to... (5 Replies)
Don't laugh, I am going to replicate the exact look and feel of the Solaris 8 GUI, the Motif-based CDE of Solaris 8, using Windows .Net, C#, and WPF.
I am looking for any kind of jump start in terms of library, free or licensable:
Has anyone every come across a library of assets and/or... (1 Reply)
Why does removing "rhgb quiet" from the kernel boot parameters control whether or not the commands I enter are displayed in single user mode ?
For instance, if I do not remove "rhgb quiet", when I am in single user mode, whatever command I type will not be displayed on the screen.
The... (0 Replies)
Hello friends,
I hope everyone is fine and doing well. I want to learn Assembly language for SPARC architecture. Is there any emulator available for 64 bit SPARC on which one can install Oracle Solaris 11 SPARC version. And ofcourse on my intel laptop computer???
Thanks! (4 Replies)
Hi folks
Doing practice certification questions but the answers to this question appear different everywhere I look? Is it also seems to be dependent on the S10 update version using at the moment in the market place? If the book was written over year back, then I suppose the hardware... (4 Replies)
I know that Sun make s a version of Solaris for Sparc platforms and also an x86 (Intel/AMD) release of Solaris. Can an application that runs on Solaris/Sparc also run on a PC running the x86 release of Solaris? Would a different release be required or any re-compling of the application?
jim (1 Reply)
metaimport(1M)metaimport(1M)NAME
metaimport - imports disk sets into existing Solaris Volume Manager configurations
SYNOPSIS
metaimport -s setname [-n] [-v] [-f] [disks...]
metaimport -r [disks...]
metaimport -V
metaimport -?
The metaimport command allows the importing of disk sets, including replicated disk sets, into an existing Solaris Volume Manager configu-
ration. Replicated disk sets are disk sets created using remote replication software.
The default Solaris Volume Manager configuration specifies a maximum number of disk sets that can be configured. The metaimport command
fails if importing the disk set would result in exceeding the number of disk sets configured on the system. To increase the number of disk
sets allowed on a system, see the .
Use metaset(1M) or metastat(1M) to view the configuration of the imported set.
You must run metaimport as root.
metaimport requires a functional Solaris Volume Manager configuration before it runs.
The following options are supported:
-f Force the import, even if a quorum of replicas from the imported disk set is not available. This option could
result in corrupt configurations and should only be used when metaimport fails with the "Insufficient quorum
detected; exiting" error. If only a partial disk set is available, this option might be necessary to successfully
import. Some or all data could be corrupted or unavailable when importing a partial set or a set lacking a replica
quorum.
-n Does not actually perform the operation, but shows the output or errors that would have resulted from the opera-
tion, had it been run.
-r Report on the non-configured disk sets found on the system. If no disk device or LUN is specified, metaimport
reports on all non-configured disk sets attached to the system. When the name of one disk is specified, metaimport
reports on the disk set (or virtual LUN) containing the specified disk. If two or more disks are specified, metaim-
port reports on the set (or sets, if they belong to different disk sets) containing the specified disks. If two or
more disks are specified, metaimport reports on the set (or sets, if they belong to different disk sets) containing
the specified disks.
-s setname Specify the disk set name to use when importing. The imported disk set will be called setname, without regard to
the name it may have had on a different system.
-v Verbose. Provides detailed information about the metadb replica location and status.
-V Version information.
-? Display a help message.
Example 1: Importing a Disk Set
The following example creates a disk set called blue and identifies c1t5d0 as a disk containing a state database replica from the disk set
being imported.
# metaimport -s blue c1t5d0
Example 2: Reporting Disk Sets to Import
The following example scans all disks and LUNs attached to the system and configured as part of the system. It scans for disks that could
be part of a disk set to be imported. Components that are already part of the Solaris Volume Manager configuration are ignored.
This use of metaimport provides suggested forms of the metaimport command to use to actually import the disk sets that have been found. You
can specify a component on the command line to reduce the scope of the scan and generate results more quickly.
# metaimport -r
0 Successful completion.
>0 An error occurred.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWmdu |
+-----------------------------+-----------------------------+
|Interface Stability |Stable |
+-----------------------------+-----------------------------+
mdmonitord(1M), metaclear(1M), metadb(1M), metadetach(1M), metahs(1M), metainit(1M), metaoffline(1M), metaonline(1M), metaparam(1M),
metarecover(1M), metareplace(1M), metaroot(1M), metaset(1M), metasync(1M), metattach(1M), md.tab(4), md.cf(4), mddb.cf(4), attributes(5)
16 May 2005 metaimport(1M)