Salut à tous,
Tout d'abord, je sais peu de choses sur ipv6.
J'ai deux objectifs. A et B, A et B, les uns avec les autres en vous connectant directement * * avec line.and je ping les uns les autres avec ipv4
Pour A:
Code PHP:
[root@localhost leilyang]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:21:9B:80:51:68
inet addr:128.224.159.188 Bcast:128.224.159.255 Mask:255.255.254.0
inet6 addr: fe80::221:9bff:fe80:5168/64 Scope:Link
inet6 addr: 2002:1::10/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4115311 errors:0 dropped:0 overruns:0 frame:0
TX packets:2408411 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:936528667 (893.1 MiB) TX bytes:464660931 (443.1 MiB)
Memory:fe9e0000-fea00000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:121667 errors:0 dropped:0 overruns:0 frame:0
TX packets:121667 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:15175375 (14.4 MiB) TX bytes:15175375 (14.4 Mi
Pour B:
Code PHP:
root@localhost:/netperf_image> lsmod
Module Size Used by
binfmt_misc 11872 1
ipv6 348912 38
root@localhost:/netperf_image> ifconfig
eth0 Link encap:Ethernet HWaddr 00:0F:B7:10:34:0E
inet addr:100.0.0.10 Bcast:100.255.255.255 Mask:255.0.0.0
inet6 addr: 2002:1::2/64 Scope:Global
inet6 addr: fe80::20f:b7ff:fe10:340e/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:20807444 errors:0 dropped:0 overruns:0 frame:0
TX packets:33797349 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4221376854 (3.9 GiB) TX bytes:38935450650 (36.2 GiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1676 errors:0 dropped:0 overruns:0 frame:0
TX packets:1676 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:206456 (201.6 KiB) TX bytes:206456 (201.6 KiB)
Sur la Une, je ping6 2002:1:: 2, mais ne parviennent pas à ping.
B. Sur la je cours
Code PHP:
root@localhost:/netperf_image> tcpdump -n ip6
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes
02:15:01.274586 IP6 2002:1::10 > ff02::1:ff00:2: ICMP6, neighbor solicitation, who has 2002:1::2, length 32
02:15:03.274684 IP6 2002:1::10 > ff02::1:ff00:2: ICMP6, neighbor solicitation, who has 2002:1::2, length 32
02:15:04.274269 IP6 2002:1::10 > ff02::1:ff00:2: ICMP6, neighbor solicitation, who has 2002:1::2, length 32
02:15:05.273853 IP6 2002:1::10 > ff02::1:ff00:2: ICMP6, neighbor solicitation, who has 2002:1::2, length 32
02:15:07.274028 IP6 2002:1::10 > ff02::1:ff00:2: ICMP6, neighbor solicitation, who has 2002:1::2, length 32
02:15:08.273606 IP6 2002:1::10 > ff02::1:ff00:2: ICMP6, neighbor solicitation, who has 2002:1::2, length 32
02:15:09.273191 IP6 2002:1::10 > ff02::1:ff00:2: ICMP6, neighbor solicitation, who has 2002:1::2, length 32
02:15:11.273365 IP6 2002:1::10 > ff02::1:ff00:2: ICMP6, neighbor solicitation, who has 2002:1::2, length 32
02:15:12.272943 IP6 2002:1::10 > ff02::1:ff00:2: ICMP6, neighbor solicitation, who has 2002:1::2, length 32
02:15:13.272529 IP6 2002:1::10 > ff02::1:ff00:2: ICMP6, neighbor solicitation, who has 2002:1::2, length 32
02:15:15.272703 IP6 2002:1::10 > ff02::1:ff00:2: ICMP6, neighbor solicitation, who has 2002:1::2, length 32
02:15:16.273286 IP6 2002:1::10 > ff02::1:ff00:2: ICMP6, neighbor solicitation, who has 2002:1::2, length 32
Merci pour votre temps
Plus d'UNIX et Linux Forum Sujets Vous trouverez peut-être utile
Powered by 
05-22-2009
Fil de Mode
