Adding RAID to server

10 More Discussions You Might Find Interesting

1. SCO

Backup/RAID of HD on Old UNIX Server

I need to be able to make a backup image of an OLD UNIX server HD where I can restore the complete HD from scratch if (when) the HD fails. This server runs the accounting system for a company. I can and have backed the data up via local FTP, but O/S and Apps are so old that I am not sure I could...

2. Hardware

3ware RAID server

We have a 3ware RAID server at work, and as the appointed systems administrator (by virtue of being the one with the most knowledge) I've taken on the job of maintaining it. I've installed smartmontools on it to keep an eye on the drives and run scans every day, and looking at the data from the...

3. Debian

Best RAID settings for Debian Server? Help!! (1+0 or 5 or NAS)

I am installing a Debian Server on a: HP Proliant DL380 G4 Dual CPU's 3.20 ghz / 800 mhz / 1MB L2 5120 MB RAM 6 hard disks on HP Smart Array 6i controller (36.4 GB Ultra320 SCSI HD each) I will be using this server to capture VHS video, encode, compress, cut, edit, make DVD's, rip...

4. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI...

5. Linux

Help Setting up Linux Raid Server

I just built a home computer with 3TB hard drives I wanted to set up in a RAID 5 and load Ubuntu server onto it. The first thing I did was set up the drives in a RAID 5 using just the motherboard chipset software to do it, so a 'hardware' RAID basically. I installed Windows first to see if...

6. Hardware

Raid 0 on database server

Hi guys. if we want to use SSD drives on a database server, can we use RAID 0 configuration because of their reliability?

7. Hardware

Hardware RAID on Sun T2000 Server

Hi All I have a Sun T2000 server. Couple of years ago I had configured and mirrored the boot drive with an other drive using hardware RAID 1 using raidctl command. Following is the hardware RAID output. root@oracledatabaseserver / $ raidctl RAID Volume RAID RAID Disk...

8. UNIX for Dummies Questions & Answers

efficient raid file server

I need to put together a RAID1 file server for use by Windoze systems. I've built zillions of windows systems from components. I was a HPUX SE for a long time at HP, but have been out of the game for years. I've got an old workhorse mobo FIC PA-2013 with a 450 MHz K6 III+ I could use, but I'd...

9. Red Hat

linux server with raid controller card

I am planning on building a fedora box with raid controller (database server). Is anybody done that ? also what kind of software do you need to backup and recover data.

10. Filesystems, Disks and Memory

2-Ch RAID Problem in SCO Open Server

Help, if possible. In SCO Open Server with installation of two-channel RAID controller the following happens: on the channel 0 disk array is seen by an operational system, and on the channel 1 array is not seen (simultaneously). That is the operational system can not simultaneously use more than...

LEARN ABOUT REDHAT

raidstop

raidstart(8)						      System Manager's Manual						      raidstart(8)

NAME

       raidstart, raidstop, - command set to manage md devices.

SYNOPSIS

       raidstart [options] <raiddevice>*

       raidstop [options] <raiddevice>*

DESCRIPTION

       RAID  devices  are  virtual  devices  created  from two or more real block devices. This allows multiple disks to be combined into a single
       filesystem, possibly with automated backup and recovery. Linux RAID devices are implemented through the md device driver.

       If you're using the /proc filesystem, /proc/mdstat gives you informations about md devices status.

       Currently, Linux supports linear md devices, RAID0 (striping), RAID1 (mirrroring), and RAID4 and RAID5. For information on the various lev-
       els of RAID, check out:

	    http://ostenfeld.dk/~jakob/Software-RAID.HOWTO/

       for new releases of the RAID driver check out:

	    ftp://ftp.fi.kernel.org/pub/linux/daemons/raid/alpha

       Avaible commands are :

       mkraid : configures (creates) md (RAID) devices in the kernel, banding multiple devices into one.

       raidstart : activates (starts) an existing 'persistent' md device

       raid0run : activates old nonpersistent RAID0/LINEAR md devices

       raidstop : turns off an md device, and unconfigures (stops) it

       By default, a systems RAID configuration is kept in /etc/raidtab, which can configure multiple RAID devices.

       All  of	these  tools  work similiarly. If -a (or --all) is specified, the specified operation is performed on all of the RAID devices men-
       tioned in the configuration file. Otherwise, one or more RAID devices must be specified on the command line. For example:

       raid0run -a

       Starts all of the 'old' RAID0 RAID devices specified in /etc/raidtab. If only /dev/md1 should be started, the following command	should	be
       used instead:

       raidstart /dev/md1

OPTIONS

       -a, --all
	      Apply the command to all of the configurations specified in the config file.

       -c, --configfile filename
	      Use filename as the configuration file (/etc/raidtab is used by default).

       -h, --help
	      Displays a short usage message, then exits.

       -V, --version
	      Displays a short version message, then exits.

NOTES

       The  raidtools  are  derived from the md-tools and raidtools packages, which were originally written by Marc Zyngier, Miguel de Icaza, Gadi
       Oxman, Bradley Ward Allen, and Ingo Molnar.

BUGS

       no known bugs.

SEE ALSO

       raidtab(5), raid0run(8), raidstop(8), mkraid(8)

																      raidstart(8)

Filesystems, Disks and Memory