Hello,

On a AIX 5.3.5.0 server, we have PID exceeding 999999. This cause some troubles in our programms.

I would like to know the process creation rules on aix :
- what is the maximum pid number ?
- what is the wrap limit on aix, and where to find it, how to configure pid wrap limit ?
- How pid are attributed ?
-...

thank you.

The best explanation i have found is this:

This page seems also to be helpful.

Maybe some guys who have attended the "kernel internals" class could expand on that?

May i ask about the background of this question?

I hope this helps.

bakunin

I modified my question, see above. Thank you.

An AIX PID is composed of the process table slot number and a generation count. Depending on whether you use a 32-Bit or a 64-Bit kernel the format differs slightly. In a 32-Bit Kernel it is a 32-Bit number and a 64-Bit number in the 64-Bit Kernel. However in both cases only the first 26 Bits are being used actually. E.g.
- Bit 0 is always zero, therefore every Process ID except for init is an even number.
- The genereation count is used to prevent PID being used again to often. I.e. every process slot can be used 128 times before a formerly used PID is reused.
- The process table slot index is the process table slot number.
- The remaining bits are unused.
- If you see a PID with an uneven number you found a Thread ID.

With a 64-Bit Kernel it works like this:
SRAD stands for Scheduler Resource Affinity Domain. Those bits are used to select the zone of the process table. The number of SRAD bits is version/release dependent. 5.1 uses 5 bits, 5.2 and 5.3 use 4 bits.