Timely question! I started a 73 GB dd disk copy a few hours ago. Unfortunately, both disks are on the same scsi controller. This is on an HP rp3440. I have glance running watching the dd process. glance can continuously update the display just like top does. By watching the file offsets I can see how fast the dd is progressing. I am getting almost 5GB/hour. And I thought this was slow. 4 days! whoa....
My command line:
Your command line will behave like either:
You need to crank that block size up.
Last edited by Yogesh Sawant; 02-26-2010 at 01:58 PM..
Reason: added code tags
Sir,
I using the following commands in a file (part of a bigger script):
#!/bin/bash
cd /opt/oracle/bin
ls -lt | tail -1 | awk '{print $6}' >> /tmp/ramb.out
If I run this from the command prompt the result is:
2007-05-16
if I run it as a cron job then... (5 Replies)
Hi ,
I have a piece of code ...wherein I need to assign the following ...
1) A command line argument to a variable
e.g origCount=ARGV
2) A unix command to a variable
e.g result=`wc -l testFile.txt`
in my awk shell script
When I do this :
print "origCount" origCount --> I get the... (0 Replies)
AIX:Command to get netaddress/subnet address command in IPv4/IP6
Can anybody help us with a command to retrieve netaddress/subnet address command in IPv4/IP6 on aix machine.
net/subnet address is in the format 172.16.212.0(signifies all 255 machines in an IPv4 network) (2 Replies)
Hi everyone,
when executing this command in unix:
echo "WM7 Fatal Alerts:", $(cat query1.txt) > a.csvIt works fine, but running this command in a shell script gives an error saying that there's a syntax error.
here is content of my script:
tdbsrvr$ vi hc.sh
"hc.sh" 22 lines, 509... (4 Replies)
Hi,
Well my title isn't very clear I think. So to understand my goal:
I have a script "test1"
#!/bin/bash
xvkbd -text blabla
with xbindkeys, I bind F5 key in order it runs my test1 script
So when I press F5, test1 runs.
I'm under Emacs/Vi and I press F5 in order to have "blabla" be... (0 Replies)
HI Guys,
I hope you are well. I am trying to write a script that gets executed every time i open a shell (cshell). I have two questions about that
1) I need to enter these commands
$ echo $DISPLAY
$ setenv $DISPLAY output_of_echo_$display_command
How can i write a... (2 Replies)
I am working with a sh script on a solaris 9 zone (sol 10 host) that grabs information to build the configuration command line. the variables Build64, SSLopt, CONFIGopt, and CC are populated in the script. the script includes
CC=`which gcc`
CONFIGopt=' --prefix=/ --exec-prefix=/usr... (8 Replies)
below is the output xml string from some other command and i will be parsing it using awk
cat /tmp/alerts.xml
<Alert id="10102" name="APP-DS-ds_ha-140018-componentFailure-S" alertDefinitionId="13982" resourceId="11427" ctime="1359453507621" fixed="false" reason="If Event/Log Level(ANY) and... (2 Replies)
exec(): 0509-036 Cannot load program /usr/opt/freeware/bin/rpm because of the following errors:
0509-022 Cannot load module /opt/freeware/lib/libintl.a(libintl.so.1).
0509-150 Dependent module /opt/freeware/lib/libiconv.a(shr4.o) could not be loaded.
0509-152 Member... (4 Replies)
Hello Forum,
I'm making very good progress on my report thanks to the very helpful people on this forum. I've been able to successfully create my report for my Red Hat servers. But I do have a few ubuntu servers in the mix and I'd like to capture some data from them when an ssh connection is... (8 Replies)
Discussion started by: greavette
8 Replies
LEARN ABOUT SUNOS
metaimport
metaimport(1M)metaimport(1M)NAME
metaimport - imports disk sets into existing Solaris Volume Manager configurations
SYNOPSIS
metaimport -s setname [-n] [-v] [-f] [disks...]
metaimport -r [disks...]
metaimport -V
metaimport -?
The metaimport command allows the importing of disk sets, including replicated disk sets, into an existing Solaris Volume Manager configu-
ration. Replicated disk sets are disk sets created using remote replication software.
The default Solaris Volume Manager configuration specifies a maximum number of disk sets that can be configured. The metaimport command
fails if importing the disk set would result in exceeding the number of disk sets configured on the system. To increase the number of disk
sets allowed on a system, see the .
Use metaset(1M) or metastat(1M) to view the configuration of the imported set.
You must run metaimport as root.
metaimport requires a functional Solaris Volume Manager configuration before it runs.
The following options are supported:
-f Force the import, even if a quorum of replicas from the imported disk set is not available. This option could
result in corrupt configurations and should only be used when metaimport fails with the "Insufficient quorum
detected; exiting" error. If only a partial disk set is available, this option might be necessary to successfully
import. Some or all data could be corrupted or unavailable when importing a partial set or a set lacking a replica
quorum.
-n Does not actually perform the operation, but shows the output or errors that would have resulted from the opera-
tion, had it been run.
-r Report on the non-configured disk sets found on the system. If no disk device or LUN is specified, metaimport
reports on all non-configured disk sets attached to the system. When the name of one disk is specified, metaimport
reports on the disk set (or virtual LUN) containing the specified disk. If two or more disks are specified, metaim-
port reports on the set (or sets, if they belong to different disk sets) containing the specified disks. If two or
more disks are specified, metaimport reports on the set (or sets, if they belong to different disk sets) containing
the specified disks.
-s setname Specify the disk set name to use when importing. The imported disk set will be called setname, without regard to
the name it may have had on a different system.
-v Verbose. Provides detailed information about the metadb replica location and status.
-V Version information.
-? Display a help message.
Example 1: Importing a Disk Set
The following example creates a disk set called blue and identifies c1t5d0 as a disk containing a state database replica from the disk set
being imported.
# metaimport -s blue c1t5d0
Example 2: Reporting Disk Sets to Import
The following example scans all disks and LUNs attached to the system and configured as part of the system. It scans for disks that could
be part of a disk set to be imported. Components that are already part of the Solaris Volume Manager configuration are ignored.
This use of metaimport provides suggested forms of the metaimport command to use to actually import the disk sets that have been found. You
can specify a component on the command line to reduce the scope of the scan and generate results more quickly.
# metaimport -r
0 Successful completion.
>0 An error occurred.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWmdu |
+-----------------------------+-----------------------------+
|Interface Stability |Stable |
+-----------------------------+-----------------------------+
mdmonitord(1M), metaclear(1M), metadb(1M), metadetach(1M), metahs(1M), metainit(1M), metaoffline(1M), metaonline(1M), metaparam(1M),
metarecover(1M), metareplace(1M), metaroot(1M), metaset(1M), metasync(1M), metattach(1M), md.tab(4), md.cf(4), mddb.cf(4), attributes(5)
16 May 2005 metaimport(1M)